What did you do in the reloading room today?

[centershot]

Working on some tes loads for my old Ithaca SxS using some hard #1 buckshot I cast up last summer. Coyotes beware!

[cwlongshot]

I loaded up More .410 .390 ball loads for testing.

CW

[2A-Jay]

Sized and primed 300 .40S&W cases same for 200 .45acp cases and 200 30-06 cases today will finish the job tomorrow charging and seating bullets then into the ammo cans they will go. The GI Ammo Cans are getting very heavy!

[onelight]

Loaded 750 45 acp with 200gr rnfp and 6.2 gr BE 86 also went to the range and shot the CZ97 , Ruger single 7 and single six a good day .

[Jal5]

Cleaned up one bench and finished depriming 9mm. I have about 400 to run thru the wet clean now.


Sent from my iPhone using Tapatalk

[trixter]

Nothing yet, I'm waiting for my son to get here so I can sit with him and guide him thru loading some 10mm.

[cwtebay]

Just realized I have 2100 - 218 Bee and 1900ish 22 Hornet that need to be loaded.... guess I will be loading those for a while!!

Sent from my Pixel 5 using Tapatalk

[sigep1764]

Deprimed and sized 500 9mm cases, loaded 50 270 win, and sized 500 9mm boolits

[trixter]

My son came over and we loaded up 100 rounds of 10mm. He set up the press and pulled the handle. We had a great time.

[Jal5]

Cleaned up one bench and finished depriming 9mm. I have about 400 to run thru the wet clean now.


Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

[Doubles Shooter]

Cast a few hundred .45's to try a few more of my new PP colors from Smoke.

[Whole Bunches]

Cast 249 boolits for the 43 Spanish.

[Jeff R]

I poured up a pile of Lee 309-113 Soup Can Boolits

[robg]

prepped my brass and as we are in lock down again stripped my 1022 completely and cleaned all the crud out .sonic cleaned my non strip-able moderator .hope this new lock down isnt to long .

[tinhorn97062]

I just bought a new to be mold, and figured I’d warm it up and cast a few.

Accurate 46-430 VG, dropping at .462 and 416gr with my blend (little heavy handed on the tin)




Sent from my iPhone using Tapatalk

[44Blam]

Cast about 500 36-180LGs... I FINALLY got my Norma 200 load feeding 100% with these guys.

[jorg0370]

I did a few things in the reloading room yesterday;

I tumbled a handful of .303 British brass, de-primed a couple of those cases that had boxer primers, and sharpened the wet grey matter between my ears on the challenges of Berdan primers.

[Loudy13]

Last night finished the 208gr subs for 300BO, finished off a lb of IMR target loading 9mm (200rds), re-filled some 45-70 cases that I pulled down with IMR 3031 and seated some 405gr Fp's that were pulled from those cases. And last but not least pulled primers from a box of 45 GAP that I had pulled down for a buddy (ordered 1000 rds of the wrong ammo) put those primers and 6.5 grains of unique in 45 acp cases and re used the pulled bullets. It was a good day for reloading got a few projects finished now on to some new ones.

[Wayne Smith]

Right now reforming 30-06 brass to 9.3x57. As it turns cooler I have some other brass to anneal in the garage.

[onelight]

My son came over and we loaded up 100 rounds of 10mm. He set up the press and pulled the handle. We had a great time.

That does sound like a great time