What did you do in the reloading room today?

[Texas by God]

I decided to try W748 with cast in the 30-30; 29 grains of it under a 180 grain 50/50 .309” Lee C309170F, lit by CCI LRM primers. I’m using up my “baggied” gunpowder lately- this made 42 rounds!

[Walks]

Sized 150+ Bullets;
Lyman #311252 - PC'd W/Smokes J.D. Green @ .312 for .32ACP

Have 100 New PMC .32ACP cases primed and ready.

[Iron369]

Made lots on not shiny things shiny again.

[coxa2]

Cast coated and sized 200+ 230gr 45acp pills

[cwlongshot]

15.3g 3031 and a 165 RD HP in LC concerted 300 BO brass seated just below 2.100 shot single hole 50 yd group but WONT FEED. ;(

This is best by far accuracy but won’t ever feed. ;(

[jimb16]

Spent the morning casting .357 155 gr. SWCs.

[onelight]

The loading room is a leather shop today.

[JoeJames]

Loaded 49 rounds of 32 S&W Long with .312" 98 grain swc's (from a bag of those a buddy gave me before it warmed up enough to re-load) on top of 2.1 grains of Bullseye. This was on Saturday. Then tried a few of them out at my cousin's place, along with an ancient box of 32S&W Long wad cutters I'd loaded about 30 years ago; mostly to get the brass. The swc's did pretty good.

[Bantou]

Loaded 20 9mms to test a new load in my wife’s gun.


Sent from my iPhone using Tapatalk

[metricmonkeywrench]

Sigh, set up my “home office” to telework from...

[cwlongshot]

Loaded off the accuracy load I found Sunday in 300 BO and a Hornady 135 FTX using 300 MP powder.

CW

[rockrat]

Loaded some 9mm luger and cast some 35 cal boolits, 235gr from a HM2 mold and 180gr from Accurate 180L mold and powdercoated them

[robg]

made bread then prepped a 100 x 308 brass ,walked the dog.

[Bantou]

made bread then prepped a 100 x 308 brass ,walked the dog.

I need to start baking bread again. I haven’t done it in years but it sure beats store bought stuff.


Sent from my iPhone using Tapatalk

[wolf3006]

Loaded 150 45 Colts.

[shell70634]

Sunday - loaded 1500 38 special 158 grain plated bullets 3.7gr AA#2
Monday- loaded 900 44 Mag 250 grain PC'd SWC 9.7gr Unique
Today- cleaned up my mess from the last 2 days and started working up 25-06 loads with H1000

[jimb16]

PC'ed and GC'ed a batch of .357 155 gr. SWCs. Also sized and deprimed 100 .45 Colt cases. I try to spend about 2 hr.s per day fiddling in the "lab". I'm getting a lot of those "when I get around to it" jobs done.

[Bantou]

PC’d and sized a bunch of 9mm and 45acp boolits. I used the basket method so they aren’t especially pretty but they are just plinking rounds so I’m not worried about it.


Sent from my iPhone using Tapatalk

[smilin jack]

Lube/sized 10 pounds of 0.452" 230gr Lee cast using the Lyman 450
Loaded a box of 45acp with Unique powder from a can marked $3.78. Been on the shelf a while.
Lube/sized a butter tub of 162gr 0.358" then after lunch, loaded a box of 38SPL and a box of 357Mag
Sized, swaged primer pockets, trimmed and deburred case mouths on 5.56mm. Sized to 223 Rem specs.
Loaded 223Rem till used up the last of the 500 box of 55gr FMJ. Loaded 20 rds of PC 55gr to try in the bolt gun.
All the loading was done on my 1980 RCBS Jr. Got rid of the old Herters twin press. Wish it was still here.
Ate dinner and checking Cast Boolits.

[robg]

made bread and pasties then loaded 50 x.223 ,69gnfmjbt with 23gn of tac for my tikka t3. home made bread tastes better.our neibour has to have a loaf every time we bake it.