What did you do in the reloading room today?

[sigep1764]

300 rounds of 223 loaded today. Ran out of W748. I really need a quick change kit, im whooped.

[toallmy]

I loaded up a bunch of 223s with jackets yesterday afternoon for a ar . So I got to play with a 550 that a member passed on to me a wile back , I only load 223 on it so it's only used 3-4 times a year .

[cwlongshot]

Saturday morning I found three boxes of 7Mag brass mixed in with small calibers... In the tumbler it went. Later on Sat Night, I pulled it out and sized and primed 60 pieces for later loading!

LOVE finding stuff I previously purchased! Its like its free!

CW

[Conditor22]

↑↑↑ That's what happens when you clean your reloading area ↑↑↑

[sigep1764]

Cleaned my reloading bench and storage. Picked up 1k Winchester small rifle primers to try, 2lbs of W748, and a Dillon Quick Change for the 550. Dug down deep and made the budget stretch without touching "house" money.

[robg]

Trimmed sized/expanded and primed 20 45-70 cases I shot on Sunday .only got to do some casting now.

[Tom W.]

↑↑↑ That's what happens when you clean your reloading area ↑↑↑

I tried that once. Never could find anything afterwards.....

[EMR]

Only had time to load up 12 rounds of .44mag. Better than nothing, right?

[cwlongshot]

↑↑↑ That's what happens when you clean your reloading area ↑↑↑

AMEN!

Im packed in like a sardine can... I "find" stuff all the time!

Yesterday I "found" 5-600 LC 30/06 Brass I knew I had but couldn't find... It was labeled 8MM Mauser with about 100 8MM Mauser that I reformed ON TOP!!!

I tumbled it, but its pretty badly tarnished. Times like this I could use the steel pins. But haven't gone there yet. I de-primed about 200 this AM, annealed them at lunch time.

Tonight I'll finish Uniforming the pockets, deburing the flash holes and form 6.5/06's out of them!

CW

[Tom W.]

Primed and flared 12 30/30 a.i. cases and when my lubrisizer finally heated up I lubed and sized some 9mm boolits with CR to .357 diameter. Then I got a call from my oldest son saying that his current GF ex husband fell out of a treestand and ended up dead. I suppose Lori & I will go to the viewing tonight.....

[Boolseye]

Experimenting with .45 ACP loads.
Everything is accurate with the NOE HG-68. Also prepping for some .223 loading.


Sent from my iPhone using Tapatalk

[fralic76]

Loaded 20 rounds of 303 savage.

Sent from my SM-G955W using Tapatalk

[cwlongshot]

Finished fifty cases into perfect and completely prepped 6.5/06 Brass

Another 60-70 outside cleaned and annealed. Waiting to be de primed and swadged then uniformed and deburred. Finally re formed/sized Trimmed and primed. ������

Time for dinner...

CW

[KrakenFan69]

loaded up 300 12 ga 1-1/8 oz 7-1/2 shot shells.

[lightman]

After nursing a hurt back for a week I ventured back to the loading room for a little while today. I started resizing a gallon can of 380's. Prolly knock off in a bit and continue tomorrow.

[cwlongshot]

After nursing a hurt back for a week I ventured back to the loading room for a little while today. I started resizing a gallon can of 380's. Prolly knock off in a bit and continue tomorrow.

GREAT therapy!

Hope ya feel better, little depilates more then a bad back!

CW

[Hossfly]

Melted 162# of SOWW and COWW into ingots got about 1500# to go.

[Tom W.]

I made a pile of 160 gr. 30 cal boolits and another of 120 gr TC 9mm. I also loaded up 4 rounds of 30/30 A.I. w/ 33 gr of Varget and some 160 gr. Lee cast.

[Texas by God]

Dug up some forgotten .45 230gr XTP hp so I'm stuffing them over Unique in .45 ACP for SD/ hunting loads. I also found a LOT of 230 fmj to load. Come fall I'll cast some 200 swc and 230 tc and resume normal life.

[mikwat]

Sized and loaded a bunch of .35 Remington boolits that I had cast last week. Sized and primed a bunch of 44 Mag brass as well. Would have loaded them too, but the powder coat formed a giant boolit glob and they kept jamming up my sizing die. Might just cast some more...darn.