Loaded 10 Lyman 225-415s over 7gr. Red Dot and 10 Speer 52gr. HPs over H4895.
Loaded 10 Lyman 225-415s over 7gr. Red Dot and 10 Speer 52gr. HPs over H4895.
You can miss fast & you can miss a lot, but only hits count.
Loaded up 1,200 Hi-Tek coated Lee 401-175 TC for my Glock 35 for a match this weekend. Now to load 9mm for my son's Glock 17.
Kraken Fan #69
Just got my K&M Neck Turning tools in. Tried them out on 82 pieces of 7.62x54R.
Annealed, full-length re-sized, length trimmed, prepped necks, trued necks, tumbled.
If this works, I've got 150 brand new PPU cases, and about 250 various used brass to process.....
Went down to the shop, but didn't do any reloading today. Instead I sorted, priced, and boxed up some surplus items to put on my table at the local gun show this Sunday. Will take 6 or 7 guns along too just to see if people are buying. At most of our previous gun shows people seemed to be buying small and relatively inexpensive "trinkets" (dies, brass, bullets, moulds, etc.) but not so much the big ticket items like guns ...
I may have passed my "Best Before" date, but I haven't reached my "Expiry" date!
Yesterday, shot a bunch of home made shot at the skeet range
Today, Loaded a bunch of 6x47 Remington, and some 35-300 Rum ammo
T'will shoot some of it tomorrow.
Mike
NRA Benefactor 2004 USAF RET 1971-95
Sized and lubed more 9mm boolits. I was going to cast, but even w/ the a/c on it was a bit warm in the shed....
Tom
μολὼν λαβέ
Did I ever mention that I hate to trim brass?
Lead bullets Matter
There are three kinds of men: The ones that learn by reading. The few who learn by observation. The rest of them have to pee on the electric fence and find out for themselves. - Will Rodgers
I'm retired now... no hurries here. It would be nice if I put some ceiling insulation in the shed. Sometimes I go in the evening when it's a bit cooler ( a relative term here in Alabama) and cast a few hundred.....
Tom
μολὼν λαβέ
Did I ever mention that I hate to trim brass?
Loaded 50 45-70 s 415 gr. Boolits over 20 gr 2400.fitted a rifle basic trigger in my savage 116 ,then to please my wife fitted a new nozzel on the kitchen tap .range tomorrow .
Loaded 50 .32WCF and 100 .38spl.
"Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety."
~Ben Franklin
I loaded a bunch of 380 for my wife's pistol and started priming 9mm cases. I ran out of small pistol primers, now I need to see if the small rifle primers I have will work.
Working on some 7 TCU 's newly formed cases out of Mil. Spec. range pick up's .
160 Lyman 287461
Sized 285" over 20.2 gr. of RL 7 . Will finsh after Church .
Sent from my SM-G930V using Tapatalk
Jesus said ( Come unto me, all ye that labor and are heavy laden, and I will give you rest ) Matt. 11:28
Finished converting 40 - 30 06 cases to 8mmx57, and polishing.
Steve,
Life Member NRA
Colorado Rifle Club member
Rocky Mtn Gun Owners member
NAGR member
I have been cleaning brass... I bought a large quantity of 40 Brass form a couple sources and they needed cleaning.
Then I loaded up four ladder loadings for my 6.5 Grendel that I shot last Sunday.
Then I have been sizing 40cal powder coated bullets.
CW
NRA Life member • REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.
Come visit my RUMBLE & uTube page's !!
https://www.RUMBLE.com/user/Cwlongshot
https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw
Cast a whole bunch of .30, .38, .45 caliber bullets since it was cooler due to the overnight rain.
Cast some 158 gr rnfp and powder coated ‘em red. Loaded ‘em into highly polished brass for a cowboy shoot. Looked like a batch of lipstick.
Sometimes life taps you on the shoulder and reminds you it's a one way street. Jim Morris
Loaded 50 round of 9MM - 120gr. Lee TC sized to .358 over 3.5gr. Titegroup.
You can miss fast & you can miss a lot, but only hits count.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |