Groo here
Looking for a 147gr mold that will work with the short neck/short nose 357sig.
Pre-made custom ,or group.
45 2.1 could you draw one up?
Groo here
Looking for a 147gr mold that will work with the short neck/short nose 357sig.
Pre-made custom ,or group.
45 2.1 could you draw one up?
Accurate 35-147S. Drops around .360" 151gr with range scrap. I chose .360 so I could run it in .38/.357 mag if need be.
you will need like a Lee TL type , because there is very little case area to work with
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |