Reloading EverythingWidenersInline FabricationRepackbox
Load DataPBcastcoMidSouth Shooters SupplyTitan Reloading
RotoMetals2 Lee Precision
Results 1 to 5 of 5

Thread: wc820 410 loads

  1. #1
    Boolit Master smkummer's Avatar
    Join Date
    Aug 2007
    Location
    So. Indiana
    Posts
    1,857

    wc820 410 loads

    I have my NFA H&R handi gun approved and should be at my door soon. I searched and the only data I have found is 14.5 grains WC820 and 1/2 oz for the 2 1/2 hull of which my Handi gun should be chambered. Any other loads including for the 3" hull with wc820? thanks

  2. #2
    Boolit Master smkummer's Avatar
    Join Date
    Aug 2007
    Location
    So. Indiana
    Posts
    1,857
    did a search not here but on the net and found I asked this question 5 years ago when loading for a 3" Saga shotgun. It appears about 13.5 is good for the 2 1/2 in. hull.

  3. #3
    Boolit Master

    Join Date
    Feb 2009
    Location
    N. E. Ohio
    Posts
    1,564
    I use 14.5 for my 2 1/2 inch skeet loads. Breaks the clays very nicely as long as I do my part. I average 19/25 with an o/u field gun choked M/I.

  4. #4
    Boolit Master


    Join Date
    Oct 2009
    Location
    NH
    Posts
    3,783
    Quote Originally Posted by smkummer View Post
    I have my NFA H&R handi gun approved and should be at my door soon. I searched and the only data I have found is 14.5 grains WC820 and 1/2 oz for the 2 1/2 hull of which my Handi gun should be chambered. Any other loads including for the 3" hull with wc820? thanks
    Make sure it is 3 inch to bad to wreck an expensive NFA item as you know the cost of it. Nice transfer by the way enjoy it!!!!!!!!!!!!

  5. #5
    Boolit Buddy Faret's Avatar
    Join Date
    Jan 2009
    Location
    South Central Wisconsin
    Posts
    472
    Got pics!

    Quote Originally Posted by smkummer View Post
    I have my NFA H&R handi gun approved and should be at my door soon. I searched and the only data I have found is 14.5 grains WC820 and 1/2 oz for the 2 1/2 hull of which my Handi gun should be chambered. Any other loads including for the 3" hull with wc820? thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check