ADvertise hereRotoMetals2MidSouth Shooters SupplyGraf & Sons
Lee PrecisionTitan ReloadingStainLess Steel MediaInline Fabrication

Results 1 to 8 of 8

Thread: Commonly used Acronyms in Boolit Coatings

  1. #1
    Boolit Master

    Beagle333's Avatar
    Join Date
    Mar 2012
    Location
    Back in the woods a piece, just outside Auburn, AL.
    Posts
    4,786

    Commonly used Acronyms in Boolit Coatings

    I will try to include the acronyms and abbreviations that you might see used in this section, so that folks who are new to coating or new to a particular new development in coatings can follow along without having to read the entire thread to see when that string of letters or word reference first appeared.
    Please let me know of any that you find useful (and relevant) and I'll try to update this post often so that it stays current.
    (keep in mind, I didn't invent 'em, I just list 'em.)

    *************************************************

    Amazon's powder coat gun (sometimes called Craftsman or Sears-type powder coat gun).Link to thread.
    -Link to Amazon's Craftsman gun Note that I have not personally tried either of these. (They should be about 60 bucks... don't fall for the $119 priced one)
    This is an example of the Ebay one that is a Craftsman clone: http://www.ebay.com/itm/Craftsman-El...item4d1f4e4760 (It's an Ebay ad, so it might not always be current. I'll keep checking back)
    The gun that first saw major use in powder coating was the Harbor Freight gun (link below, under "Harbor Freight"), but this Craftsman-type gun is seeing more popularity as well.

    ASBB = AirSoft BB. Link to example.

    ASBBDT = Dry tumbling using the AirSoft BBs as a tumbling media.

    BB = The term "BB" originated from the size of steel balls used in a shotgun shell of the same size. BB shot was normally 0.180 inches (4.6 mm), but tended to vary considerably in size due to the high allowable tolerances for shotgun shell use. Around 1900, Daisy, one of the earliest makers of BB guns, changed their BB gun bore diameter to 0.175 inches (4.4 mm), and began to market precision-made lead shot specifically for their BB guns. They called these simply "round shots", but the "BB" name was already well established, and everyone continued calling the guns "BB guns" and the shot "BB shot" or just "BBs".

    BBDT = BB dry tumble using some form of BBs as media.

    DT = Dry tumble.

    ESPC = Electrostatic powder coat (applied with a spray gun utilizing a static charge to aid powder sticking to boolits, usually the Harbor Freight model, but there are others.)

    ESSG = Electrostatic Spray Gun

    HDPE = High Density Polyethylene.

    HI-TEK = it is a coating system similar to PC, but it is more of a stain than a paint. It involves a double dose of wet tumbling and baking and seems to work really well if you don't want to mess with spraying or dry powder tumbling. There is a sticky on it, usually the first sticky listed, and the longest.
    Here's a great link on how to do it. HI-TEK-do-s-and-don-ts

    HF = Harbor Freight www.harborfreight.com
    Direct link to Harbor Freight powder coat gun

    LDPE = Low Density Polyethylene.

    LLPE = Linear Low Density Polyethylene (ziplock bags).

    NSAF = Non-Stick Aluminum Foil. Link to example at WalMart.

    PBTP = PowerBuyThePound.com it's a website belonging to one of the powdercoat retailers. www.powderbuythepound.com

    PC = Powder coat.

    PTFE = Teflon.

    Smoke's powder = Smoke4320 is a vendor sponsor who sells powder here. Check out his ad in the vendor section and he's usually running a sale in the Swappin' & Sellin' section as well.
    His vendor page.*****His current S&S ad.

    TO = Toaster Oven. A convection toaster oven is preferred but not mandatory. (I have not yet seen anybody use an abbreviaiton for convection toaster oven.)

    VHT = Very High Temp epoxy spray paint. Used for BBQ grills, also manifolds, headers, mostly automotive applications.
    Link to example.

    *************************************************
    Thanks for your help. Feel free to contribute any coating-related acronyms or abbreviations that you find and do not recognize while reading about coating, and please PM me about any broken links in the above descriptions. Some examples are from retail sites and they may occasionally change them.
    Happy Coating!!!
    Last edited by Beagle333; 09-10-2016 at 06:07 PM. Reason: links still work.
    Colt 1860, it just feels right.

  2. #2
    Boolit Master

    Beagle333's Avatar
    Join Date
    Mar 2012
    Location
    Back in the woods a piece, just outside Auburn, AL.
    Posts
    4,786
    This space left intentionally blank for future updates and expansion.
    List above updated and links checked 9/10/16
    Last edited by Beagle333; 09-10-2016 at 06:07 PM.
    Colt 1860, it just feels right.

  3. #3
    Boolit Master flyingmonkey35's Avatar
    Join Date
    Apr 2014
    Location
    Utah
    Posts
    1,021
    Love it!
    Smoke you got you're own definition.

  4. #4
    Boolit Master
    runfiverun's Avatar
    Join Date
    Dec 2007
    Location
    soda springs Id.
    Posts
    27,983
    as new things pop up this thread can be added to by anybody.
    let's keep it on topic and to the point so that the abbreviations can be found easily.




    I want to thank beagle 333 in the open forum for the work he put into this new thread.
    it's all an educated guess,,,, till the trigger is pulled.

    this opinion brought to you by mister low-tech solution..

  5. #5
    Boolit Master

    Hickory's Avatar
    Join Date
    Feb 2009
    Location
    The Great Black Swamp of Northwest Ohio
    Posts
    3,314
    Thank you, with people using acronyms and abbreviations so much in their post, often times it looks like spilled alphabet soup that I'm looking at, and I don't take the time to try to figure it out.

    I think if a person REALLY​ wanted to convey what he wanted others to know, he would write out the entire word.

    For the most part, the over use of
    acronyms and abbreviations translates laziness on their part.
    Political correctness is a national suicide pact.

    I am a sovereign individual, accountable
    only to God and my own conscience.

  6. #6
    Super Moderator & Official Cast Boolits Sketch Artist


    RP's Avatar
    Join Date
    Mar 2008
    Location
    Nahunta NC
    Posts
    2,679
    It is confusing for someone that just walks into a thread to translate. I use a lot of the short cut words but limit then to such things like PC for powder coating. But maybe I am lazy the other way for not wanting to learn all the new shortcuts.
    Reloading to save money I am sure the saving is going to start soon

  7. #7
    Boolit Master Pumpkinheaver's Avatar
    Join Date
    Aug 2015
    Location
    Missouri
    Posts
    189
    Thanks for this list. I am new to the PC game and it really helps. Maybe now I won't think I am reading Greek.

  8. #8
    Boolit Master OS OK's Avatar
    Join Date
    Dec 2015
    Location
    El Dorado County, N. Ca.
    Posts
    3,955
    "Thanks for the list of acronyms, I enjoy reading through the comments searching for 'pearls of wisdom' but by the time I get the acronyms sorted out I've lost track of what I was trying to decipher in the first place. Reminds me of my Doctor telling something important…he looks at my 'deer in the headlights' stare and wonders if I am even listening to him…"Yeah Doc. I'm hangin onto every word!"
    When I was a kid…well…things were a little different! Kinda miss those dayz."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check