THIS GROUP BUY IS NOW CLOSED
If you wish to make any changes or additions, please contact Miha directly via PM, email, or his website.
The final list I sent Miha is attached to Post 130 and listed here.
Thanks All,
Bill
I received permission from Miha to re-run a group buy for the popular 429640 in hollow point and solid, BRASS, 2-cavity or 4-cavity, PB or GC. Previous drawing by 45 2.1 and some photos from Miha:
This mold has also been called the 432640 & 434640 weighing approximately 270gr solid and 250gr HP with the large pin. Glen Fryxell in his book, From Ingot to Target: A Cast Bullet Guide for Handgunners, calls this bullet; “… arguably the single most useful cast bullet on the market today for the American handgun hunter.” The last group buy for this mold started by happy7 is here:
http://castboolits.gunloads.com/show...ty-cramer-mold
Details for this group buy are:0.432 or 0.434inch diameters only
2-cavity or 4-cavity
plain base or gas check
Solid or HP (all cavities must be the same in each mold)
HP pins are large round pins (shown in the drawing), small round pins, and *blank pins to cast solids. All pins included.
*Blank pins are for casting solids without the hollow point pins projecting from the bottom of the mold when reversed.
Costs per Miha’s recent note are:“160$ for 4cav hp (shipping+all pins included)
110$ for 4 cav solid (shipping included)
105$ for 2 cav hp Shipping included +all pins
85$ for 2cav solid (shipping included)”
Miha will send out invoices via email when the buy closes. Payments will generally be through PayPal (he's in Slovenia).
Miha also has some high quality handles available on his website: www.mp-molds.com
I did ask Miha if this group buy could possibly be completed in 9 months or so but I have not received a response yet.
To signup for this group buy, reply to this thread (not with a PM) with the following:CastBoolit name
How many molds
2-cavity or 4-cavity
PB or GC
solid or HP
diameter
Your disguised email contact (for example “name at gmail dot com”)
I will add you to the list in post #1. I will try to visit this thread weekly to update and respond to questions.
The group buy will be closed when I receive instructions from Miha so keep an eye on this thread. Once your mold has been paid for, Miha will ship it. Delivery within the USA usually takes 1-2 weeks. If you have questions, please post them here.
Signup List:
1. wdr2, 1 mold, 4 cav, GC, HP with all pins, 0.432, wrichins at gmail dot com
2. wdr2, 1 mold, 4 cav, PB, HP with all pins, 0.432, wrichins at gmail dot com
3. dh2, 1 mold, 4 cav, GC, HP with all pins, 0.434, jbillwelch at yahoo dot com
4. BK7saum, 1 mold, 2 cav, GC, HP with all pins, 0.432, Bradleyk4860 AT gmail DOT com
5. BK7saum, 1 mold, 4 cav, PB, HP with all pins, 0.432, Bradleyk4860 AT gmail DOT com
6. BruMatt, 1 mold, 4 cav, PB, HP with all pins, 0.434, jmwbruce at a0l dot com
7. Dkf, 1 mold, 2 cav, GC, HP with all pins, 0.434, krflff2 at dejazzd dot com
8. Jakeleg, 1 mold, 2 cav, PB, HP with all pins, 0.432, steffind at grm dot net
9. monsoon35, 1 mold, 2 cav, GC, HP with all pins, 0.434, monsoon35 at internode.on
10. gutpile, 1 mold, 2 cav, GC, HP with all pins, 0.434, gutpile90 at yahoo dot com
11. Hickory, 1 mold, 2 cav, PB, HP with all pins, 0.432, lost_lakes_llc at msn dot com
12. Hickory, 1 mold, 2 cav, GC, HP with all pins, 0.434, lost_lakes_llc at msn dot com
13. Master_Mechanic, 1 mold, 4 cav, PB, HP with all pins, 0.432, tgraff AT crsrents DOT ca
14. cast-n-blast, 1 mold, 2 cav, PB, HP with all pins, 0.432, hoover0588 at aol dot com
15. PWS, 1 mold, 4 cav, PB, HP with all pins, 0.432, mikefairbanks45 at yahoo dot com
16. PWS, 1 mold, 4 cav, PB, solid, 0.432, mikefairbanks45 at yahoo dot com
17. gustusj, 1 mold, 2 cav, GC, HP with all pins, 0.434, ajarshooter at yahoo dot com
18. 9w1911, 1 mold, 2 cav, GC, HP with all pins, 0.434, ninthwardskis at gmail dot com
19. Sureweld78, 1 mold, 4 cav, PB, HP with all pins, 0.432, alva34 at hotmail dot com
20. Thor's Daddy, 1 mold, 4 cav, PB, HP with all pins, .0432, one set of handles, rodrick dot reidsma at gmail dot com
21. cast-n-blast, 1 mold, 2 cav, PB, HP with all pins, 0.434, hoover0588 at aol dot com
22. Bethelhntr, 1 mold, 4 cav, PB, HP with all pins, 0.434, larrydeen at hotmail dot com
23. gtgeorge, 1 mold, 4 cav, PB, HP with all pins, 0.432, gspatton at gttransmissions dot com
24. GlocksareGood, 1 mold, 4 cav, GC, HP with all pins, 0.432, b (underscore) maney at verizon dot net
25. WallyM3, 1 mold, 2 cav, PB, HP with all pins, 0.434, wally dot murray3 at gmail dot com
26. harley45, 1 mold, 2 cav, GC, HP with all pins, 0.432, eric at whitetigerblog dot com
27. Nix, 1 mold, 4 cav, PB, HP with all pins, 0.432, with one set of handles, greg at tacticaladvantage dot ca
28. jeremiah.allen1, 1 mold, 4 cav, PB, HP with all pins, 0.432, jeremiah dot allen1553 at gmail dot com
29. FLINTNFIRE, 1 mold , 4 cav, PB, HP with all pins, 0.434 , lowtons at gmail dot com
30. denul, 1 mold , 4 cav, PB, HP with all pins, 0.432, dennis dot a dot ulrich at gmail dot com
31. Cowboy_Dan, 1 mold, 2-cavity, PB, HP, .434, Mauckdan at gmail dot com
32. 50-90, 1 mold , 4 cav, PB, HP with all pins, 0.432, with one set of handles, gibson at Caprock-spur dot com
33. Spumco, 1 mold , 4 cav, PB, HP with all pins, 0.432, spumco at msn dot com
34. jroc, 1 mold , 4 cav, GC, solid, 0.432, jroc3099 at yah00 dot com
35. jroc, 1 mold , 4 cav, PB, HP with all pins, 0.434, jroc3099 at yah00 dot com
36. MostlyOnThePaper, 1 mold, 4 cav, GC , HP with all pins, 0.432, kc5vtk at comcast dot net
37. AnthonyB, 1 mold, 2 cav, PB, HP with all pins, 0.434, anthonyb45 at verizon.net
38. AnthonyB, 1 mold, 2 cav, GC, HP with all pins, 0.432, anthonyb45 at verizon.net
39. ballistim, 1 mold, 2 cav, GC, HP with all pins, 0.432, ballistim at yahoo dot com
40. Hcmachine, 1 mold, 4 cav, PB, HP with all pins, 0.434, with one set of handles, rangr02 at hotmail dot com
41. contender1, 1 mold, 4 cav, PB, HP with all pins, 0.432, contender1 at yahoo dot com
42. Arrow, 1 mold, 4 cav, PB, HP with all pins, 0.432, Flyfisherman 246 at sbc global dot net
43. 35Whelen, 1 mold, 2 cav, PB, HP with all pins, 0.432, ggibbs08 at yahoo dot com
44. GL49, 1 mold, 4 cav, PB, HP with all pins, 0.432, larrybohn at ashlandhome dot net
45. RedHawk357Mag, 1 mold, 4 cav, PB, HP with all pins, 0.432, RedHawk357Mag@gmail dot com
46. exit, 1 mold, 4 cav, GC, HP with all pins, 0.432, with one set of handles, trigg.stephen at me dot com
47. Loc n Load, 1 mold, 4 cav, GC, HP with all pins, 0.432, Wewestjr01 at frontier dot com
48. Loc n Load, 1 mold, 4 cav, PB, HP with all pins, 0.432, Wewestjr01 at frontier dot com
49. Luskejeger, 1 mold, 2 cav, GC, HP with all pins, 0.432, kri_stiansen AT yahoo DOT no
50. kabar, 1 mold, 2 cav, PB, HP with all pins, 0.432, spinner at thegeo dot net
51. autodidact, 1 mold, 4 cav, GC, HP with all pins, 0.434, jbpaul at suddenlink dot net
52. phaessler, 1 mold, 2 cav, GC, HP with all pins, 0.434, haesslerpd618 at gmail dot com
53. Rattlesnake Charlie, 1 mold, 2 cav, PB, HP with all pins, 0.432, charles underscore e nuss at yahoo dot com
54. Rattlesnake Charlie, 1 mold, 2 cav, GC, HP with all pins, 0.432, charles underscore e nuss at yahoo dot com
55. happy7, 1 mold, 4 cav, GC, HP with all pins, 0.432, info at mattsbullets dot com
56. funshooter, 1 mold, 4 cav, GC, HP with all pins, 0.434, weldinspector at earthlink dot net
57. glockky, 1 mold, 2 cav, GC, HP with all pins, 0.434, twgrubb3 at gmail dot com
58. geoff rodger, 1 mold, 4 cav, PB, HP with all pins, 0.432, geoffreyrodger at Hotmail dot com
59. TMSCU, 1 mold, 4 cav, GC, HP with all pins, 0.434, tmoyer1952 at yahoo dot com
60. DR Owl Creek, 1 mold, 2 cav, PB, HP with all pins, 0.432, drowlcreekatgmaildotcom
61. GunTotinAmerican, 1 mold, 2 cav, GC, HP with all pins, 0.434, reed78.aratgmaildotcom
62. alamogunr, 1 mold, 2 cav, GC, HP with all pins, 0.432, alamogunr AT charter DOT net
Reply With Quote
Originally Posted by monsoon35
