hellois the rcbs and dillon primer feed tube are compatibles ?thanks.ANDRE
hellois the rcbs and dillon primer feed tube are compatibles ?thanks.ANDRE
The short answer, NO
Calamity Jake
NRA Life Member
SASS 15704
Shoot straight, keepem in the ten ring.
thanks
Short answer is yes. You will need to drill a hole for the cotter pin/hair pin retainer about 1/2 inch up the tube from the stock location in the Dillon tube but the tube will work just fine. Redding tubes will work with out modification. I just tried them on one of my presses.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |