I am looking for a inexpensive (read that cheap as dirt) but good method of storing spare revolver cylinders for my Pietta 1858 Remington New Army. I'm no looking for a holster, but something to put them in to prevent scratches, etc while being stored in the gunsafe or cabinet.
Thank you for suggestions,
Dave
PVC pipe andwrapped in VPI paper.
This is a good idea. I never thought about this way.Originally Posted by Outpost75
Don't need to store it till the next civil war, just until the next shooting session.
velvet sacks lightly oiled. then in PVC pipe.
Plastic baby food jars.
"There's a reason John Browning's middle name is Moses."
I use old socks
The Bird of Time has but a little way
To fly-and Lo! the bird is on the wing
You need to start drinking Crown Royal!
Shoe box with rags or tissue paper to keep them from banging on each other.
Make a mobile out of them and hang it in the atrium or in a stair well.
Array them in an interesting pattern as part of a framed wall hanging.
Build a plexiglass dispenser for them, like one of the Chapstik dispensers. It'll make a great conversation starter, sitting on the kitchen counter or bar next to the jar of pickled eggs.
Build a copper wire "tree" and use the cylinders as "fruit".
I soak it in RemOil and ziplock it in a sandwich baggie and stuff that in an old tube sock.
KE4GWE - - - - - - Colt 1860, it just feels right.
The capped PVC pipe and VPI paper will last many years.
Pill bottle's with VCI
2x4 hole drilled out to your dia, + an old sock? (around 1 3/4 inches)
The rules of the range are simple at best, Should you venture in that habitat, Don't cuss a man's dog, be good to the cook, And don't mess with a cowboy's hat. ~ Baxter Black
I vote RIG on the cylinder and old sock. Cheap and effective.
I don't think they're suggesting that you glue both PVC caps in place! I believe they're talking about a short section of PVC pipe of the appropriate diameter, one end cap glued on and the other end cap just slipped on to cap the other end. It would be an excellent storage system.Don't need to store it till the next civil war, just until the next shooting session.
However for cheap, I'd still go with some RIG grease and an old sock!
Plastic tupperware container for leftover foods. Wrap some napkins around them and you're set.
"He that believeth on him is not condemned: but he that believeth not is condemned already, because he hath not believed in the name of the only begotten Son of God." - John 3:18
wrapped in a heavy blue shop type paper towel & stored in a little short single-serve Pringles can.
Old White socks ,you can use a Sharpie to indicate contents.Use them for rifle bolts also ,when you can,t slide the intact rifle into your gunsack as in straight bolt mil-surps or just for security reasons.Cheers Mike..
For what it's worth; I store my single spare cylinder in a vegetable-tanned, leather, belt pouch, probably from Cabela’s. No issues in several years. The only time it comes out of that pouch is when I load it into the gun, which is rarely. It stays on my gun belt, but I usually don’t use but the one cylinder when shooting because I’d rather not have to clean two.
Without the pouch I'd put it in a box with some paper for padding. They come shipped in a small box after all, and so if I had a bunch of them I'd put the little boxes into a single, larger one.
The issue then would be how to handle multiple spare cylinders while out somewhere shooting. If they’re not on your belt they’re what, lying helter skelter on a table or in some kind of a dispenser? If you have fashioned a dispenser (something like an egg crate maybe - holes cut in one layer of dense foam, and pasted to another layer or a board of plywood for a floor?) that’s where you store them at home. Where I shoot (the great wide open) there are no tables (and no fixed shooting positions) so if they’re not on my belt they’d have to be in a pocket, which is un-handy, and I wish to do only that which is handy.
One cylinder for use (the second cylinder gets used only if I’m showing off the Remington to someone else), a box of consumable cartridges which contain all the necessary lube, a capper, and I’m happy. Gun, cartridge box, capper, gun belt, ear plugs. That's four things, the way I see it (I already wear glasses). Simple is good.
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote