Lee PrecisionInline FabricationTitan ReloadingADvertise here
Graf & SonsStainLess Steel MediaMidSouth Shooters SupplyRotoMetals2

Page 1 of 24 1234567891011 ... LastLast
Results 1 to 20 of 469

Thread: Powder coated bullets pics only

  1. #1
    Super Moderator & Official Cast Boolits Sketch Artist


    RP's Avatar
    Join Date
    Mar 2008
    Location
    Nahunta NC
    Posts
    2,580

    Powder coated bullets pics only

    Hey guys we all enjoy looking at the pictures of everyone's bullets but all the threads seem to start filling with comments and ?
    So I am starting this thread for Pictures only comments in the post of the picture is fine such as (These bullets are 30 cal lyman mold number 3133112 coated with HF red with what method)
    That way you can scroll down the gallery of pictures just enjoying the fine art work.
    Here is a example
    http://
    These are 40 cal I used a mehic 170 mold coated with several powders I picked up from a fellow that PC for a living and gave me his leftovers. The great looking young girl modeling ok playing is one of my grandkids. I plan on loading these up in my 40s and my sons new 10mm when he gets a barrel. They were cast with WWs, oh almost forgot I sprayed them sitting on a gig I made using plywood covered in alum siding with nails shot with my trim gun.
    Yes that's a lot of info but may answer a lot of peoples ? you do not have to put any details but they are always nice for those who are just getting started or others looking at new ways to do it. If you see a pic that you have a ? about PM the poster of that pic


    ALL POST WITH OUT A PIC OF A PC BULLET WILL BE REMOVED

    OK THIS IS NOW A STICKY AND IT SHOULD BE UNDERSTOOD THAT ALL POST WITHOUT NEW PICTURES WILL BE DELETED THANKS TO ALL FOR POSTING AND ITS LOOKING GOOD. AVOID POSTING WITHOUT PICTURES ANY ? OR COMMENTS CAN BE SENT TO THE POSTER .

    Lets see how this works


    If the poster is getting a lot of PMs he or she may want to edit his Post adding the info that is requested. Also if you can post the pic so its shows without a link would be great thanks.
    Last edited by RP; 06-01-2015 at 11:31 PM.
    Reloading to save money I am sure the saving is going to start soon

  2. #2
    Boolit Master Jupiter7's Avatar
    Join Date
    Mar 2013
    Location
    Dyer, TN
    Posts
    1,312
    All BBDT, one coat.
    Lee 452255, Lee 312155, Accurate 310240E
    HF red, smoke's blue & green, purple mix of HF red and smokes blue &pink
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1409197601.359899.jpg 
Views:	718 
Size:	44.6 KB 
ID:	114725

  3. #3
    Boolit Master
    1911KY's Avatar
    Join Date
    Aug 2014
    Posts
    340
    My first attempts at BBDT PC... Lee .452 200 SWC's mold...HF White, Smoke's Blue and Eastwood's Hotcoat High Gloss Black.

    "The Constitution shall never be construed to prevent the people of the United States who are peaceable citizens from keeping their own arms."
    - Samuel Adams


    COTEP CBOB0736

  4. #4
    Super Moderator & Official Cast Boolits Sketch Artist


    RP's Avatar
    Join Date
    Mar 2008
    Location
    Nahunta NC
    Posts
    2,580
    199 views and so few post was this a bad ideal ?
    http://
    Reloading to save money I am sure the saving is going to start soon

  5. #5
    Boolit Master

    Beagle333's Avatar
    Join Date
    Mar 2012
    Location
    Back in the woods a piece, just outside Auburn, AL.
    Posts
    4,659

    It's not a bad idea. I just got sooooo many coated boolits around here now that I can't get caught up on my shooting, to need more boolits coated!
    (these are 357446 162gr)


    All kinds.... all sizes.... there's just so many of them!!!
    Colt 1860, it just feels right.

  6. #6
    Boolit Master
    alfloyd's Avatar
    Join Date
    Apr 2009
    Location
    Logan, Utah
    Posts
    584
    Click image for larger version. 

Name:	40 Cal Green Slugs.jpg 
Views:	444 
Size:	50.3 KB 
ID:	115028

    Here are a few that I sprayed with a mix of different colors.
    I kinda like them.

    Lafaun
    Just staying at home and playing with multi-color boolits.

  7. #7
    Super Moderator & Official Cast Boolits Sketch Artist


    RP's Avatar
    Join Date
    Mar 2008
    Location
    Nahunta NC
    Posts
    2,580


    I had to post this one over here before it got lost in the mix. The picture and work was done by Two Wheel Duke
    Reloading to save money I am sure the saving is going to start soon

  8. #8
    Boolit Master

    Beagle333's Avatar
    Join Date
    Mar 2012
    Location
    Back in the woods a piece, just outside Auburn, AL.
    Posts
    4,659

    This was my first family portrait, and even though I have a bunch more molds and colors now, I still like this one.
    Colt 1860, it just feels right.

  9. #9
    Super Moderator & Official Cast Boolits Sketch Artist


    RP's Avatar
    Join Date
    Mar 2008
    Location
    Nahunta NC
    Posts
    2,580
    http://

    Well to keep the post up top and show off my yeller boolits.
    Reloading to save money I am sure the saving is going to start soon

  10. #10
    Boolit Master el34's Avatar
    Join Date
    May 2013
    Location
    N Texas
    Posts
    1,186
    Quote Originally Posted by RP View Post
    http://

    Well to keep the post up top and show off my yeller boolits.
    Cuties!! 356? HP yellow?

    Here's my ticket, note the 40s on the right-

    Click image for larger version. 

Name:	IMAG0685.jpg 
Views:	466 
Size:	49.9 KB 
ID:	115425
    "The urge to save humanity is almost always a false front for the urge to rule." --H. L. Menchen

  11. #11
    Boolit Master
    Blanco's Avatar
    Join Date
    Jan 2014
    Location
    Cowtown / Ft. Worth
    Posts
    609
    el 34 Got all the colors
    He is kinda the Cast Boolit fashion guru.



    Ok I got a couple

    Click image for larger version. 

Name:	WP_20140727_001.jpg 
Views:	410 
Size:	28.7 KB 
ID:	115464Click image for larger version. 

Name:	WP_20140715_016.jpg 
Views:	364 
Size:	42.6 KB 
ID:	115465Click image for larger version. 

Name:	WP_20140831_006.jpg 
Views:	361 
Size:	42.6 KB 
ID:	115466
    I did some of the blue and white like 1911KY but mine weren't as pretty
    Last edited by RP; 09-04-2014 at 10:17 PM.
    Do, or do not.
    There is no try.
    Yoda

  12. #12
    Boolit Master
    1911KY's Avatar
    Join Date
    Aug 2014
    Posts
    340
    Did these speckled beauties last night. HF white base coat with Smoke's blue overcoat.



    "The Constitution shall never be construed to prevent the people of the United States who are peaceable citizens from keeping their own arms."
    - Samuel Adams


    COTEP CBOB0736

  13. #13
    Boolit Master
    Join Date
    Oct 2013
    Location
    Pensacola, Fla
    Posts
    235

  14. #14
    Boolit Man

    45bpcr's Avatar
    Join Date
    Apr 2011
    Location
    NH
    Posts
    136
    This was my first attempt. Tin foil was a bad idea as the bullets stuck to it. 2nd attempt use a silicon baking pan with worked well.
    I'll try them in my 300 Blackout this weekend.Click image for larger version. 

Name:	P9050026.jpg 
Views:	368 
Size:	108.5 KB 
ID:	115550
    I just dumped some powder into a dish and set it on my tumbler, shook it around and set it back a few times then baked them for 15 min @ 400°

    Click image for larger version. 

Name:	P9050027.jpg 
Views:	483 
Size:	124.0 KB 
ID:	115551

    Here's an uncoated one, a coated one, and a 208 grn A-max for comparison.

    45bpcr
    Live Free or Die Death is not the worst of all evils

  15. #15
    Boolit Master



    snuffy's Avatar
    Join Date
    Feb 2007
    Location
    Oshkosh Wi.
    Posts
    1,724
    Click image for larger version. 

Name:	IMG_2428.jpg 
Views:	464 
Size:	54.1 KB 
ID:	115552Click image for larger version. 

Name:	IMG_2426.jpg 
Views:	474 
Size:	81.2 KB 
ID:	115553Click image for larger version. 

Name:	IMG_2430.jpg 
Views:	456 
Size:	110.7 KB 
ID:	115554Click image for larger version. 

Name:	IMG_2431.jpg 
Views:	466 
Size:	74.6 KB 
ID:	115555Click image for larger version. 

Name:	IMG_2432.jpg 
Views:	472 
Size:	83.7 KB 
ID:	115556

    Just got some new powder in from powder-by-the-pound last night. These were tumble coated by placing bare boolits inside a quart ziplock freezer bag, then a teaspoon of the HD orange and the liquid black , tumbling in a #5 bowl and twirling it for about 5 minutes. Coverage was very good, then baked @ 400 for 15 minutes.

    Those are a mihec 45 acp 200 RNFP round HP and Penta point.

    Notice my solution to boolits sliding while loading into the oven. That's ˝ inch hardware mesh,(some call it chicken wire), under the no-stick foil. Pushing down with each boolit creates a dent in the foil that the boolit then rests in.

    I was real happy with the coverage. Before that I had used the airsoft in with the boolits in both the ziplock bowls, AND in my FA tumbler. I never got the kind o f coverage I saw last night, but that was HF red, some have had problems with as I have also. PBTP was fast, 3 days even with UPS ground.'

    More pics when I get some loaded---.
    He is your friend, your partner, your defender, your dog.
    You are his life, his love, his leader. He will be yours, faithful and true, to the last beat of his heart.
    You owe it to him to be worthy of such devotion."

    “At the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who know neither victory nor defeat”--Theodore Roosevelt

  16. #16
    Boolit Master el34's Avatar
    Join Date
    May 2013
    Location
    N Texas
    Posts
    1,186
    My boolits on PowderBuyThePound website-

    Click image for larger version. 

Name:	354.jpg 
Views:	571 
Size:	18.6 KB 
ID:	115641 (click)

    And in nickel cases-

    Click image for larger version. 

Name:	IMAG0691.jpg 
Views:	413 
Size:	43.7 KB 
ID:	115642 Click image for larger version. 

Name:	IMAG0693.jpg 
Views:	368 
Size:	35.7 KB 
ID:	115643
    Last edited by el34; 09-07-2014 at 03:05 PM.
    "The urge to save humanity is almost always a false front for the urge to rule." --H. L. Menchen

  17. #17
    Boolit Master
    Join Date
    Feb 2013
    Location
    Central North Carolina
    Posts
    256
    Click image for larger version. 

Name:	image.jpg 
Views:	373 
Size:	52.9 KB 
ID:	115702Click image for larger version. 

Name:	image.jpg 
Views:	357 
Size:	63.2 KB 
ID:	115703

    Red is HF... Blue is $5.00 eBay purchase.

    All perform great when applied with the HF gun..

  18. #18
    Boolit Man
    torker's Avatar
    Join Date
    Feb 2010
    Location
    The Great State,El Paso Tx. in the winter months, Michigan in the Summer Fishing for Salmon .
    Posts
    111

    New ESPC Gun

    I went to HF and purchased the ES system. Been reading all the posts and such and said what the h@ll.

    HF Black Matte
    Air Press. 25 psi
    Flow valve set to middle position
    Small diffuser about half way up on metal thingy
    Ground hooked up
    Pulled the trigger, activated foot pedal, EZ-PZ, This is easy. Thanks for all the pioneers who figured this stuff out.

    here's the results:Click image for larger version. 

Name:	DSCF0063.jpg 
Views:	306 
Size:	57.8 KB 
ID:	115864Click image for larger version. 

Name:	DSCF0062.jpg 
Views:	312 
Size:	62.8 KB 
ID:	115865Click image for larger version. 

Name:	DSCF0060.jpg 
Views:	335 
Size:	46.6 KB 
ID:	115867Click image for larger version. 

Name:	DSCF0061.jpg 
Views:	327 
Size:	52.6 KB 
ID:	115868

    The Camera flash makes it look like bare spots on boolits. coverage was 100%
    pic 1. Lee 158 GC milled off for PB (147 grn.)
    pic 2. Keith 245
    pic 3. Lee 240 SWC
    pic 4. Lee 430/310 GC milled off for PB ( 265 grn.)
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSCF0048.jpg 
Views:	375 
Size:	82.7 KB 
ID:	115869  
    Last edited by torker; 09-10-2014 at 11:23 PM.

  19. #19
    Boolit Master el34's Avatar
    Join Date
    May 2013
    Location
    N Texas
    Posts
    1,186
    Congrats!!

    I'll suggest removing that diffuser alltogether, you don't have any reason to spread out the spray. Reduce the air pressure just to where it still pumps powder and get as close as possible without sparking.

    And if you want you can reduce the flash by creating little pedestals for the boolits to sit on. Beagle333 posted lotso pics several months ago. Basically it's JB Welding 6-32 nuts to the baking pan about 1" spacing. Then cover with the non-stick and mash down, starting in the center. Boolits sprayed and baked fall off with no flashing. I have to use new foil every time but some folks get 2-3 cycles before changing it. I'm starting to think the flat black won't flash as much as the glossies, dunno, I don't use it.

    My ticket-

    Click image for larger version. 

Name:	IMAG0645.jpg 
Views:	449 
Size:	28.6 KB 
ID:	115873
    Last edited by el34; 09-08-2014 at 10:14 PM.
    "The urge to save humanity is almost always a false front for the urge to rule." --H. L. Menchen

  20. #20
    Boolit Master

    Beagle333's Avatar
    Join Date
    Mar 2012
    Location
    Back in the woods a piece, just outside Auburn, AL.
    Posts
    4,659
    This'll get rid of any flashing problems if somebody is getting more than they want around the bases.




    Here is what is under the foil (6-32 nuts):


    After spraying:


    Makes the bases come out nice and clean, with a little wrap-around effect.
    Last edited by Beagle333; 09-26-2014 at 11:49 AM.
    Colt 1860, it just feels right.

Page 1 of 24 1234567891011 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check