Looks like these little RB's can been a pain . Might give the Lyman 287308 a try if I can find one cheap enough. Well it is good to know I can increase the bullet dia. a little bit more, if the round will chamber by doing so.
Looks like these little RB's can been a pain . Might give the Lyman 287308 a try if I can find one cheap enough. Well it is good to know I can increase the bullet dia. a little bit more, if the round will chamber by doing so.
Last edited by brstevns; 10-27-2014 at 09:50 AM.
Well I did not give up but then I did. I took the carbine barrel off and put on a rifle barrel. Loaded up a few rounds over the weekend and went to the range. Load was 10.5 Unique and a Lyman 287308 bullet sized .290 Was well surprised when it did not key hole , fired off the few rounds that I loaded and they all made a perfect round hole. Distance only 25 yards but it is a start.
chuckling to myself.
I kinda knew this was coming, I handled a few of these years ago and could look down the barrel of them and see they were trashed.
I think they musta packed them full of mud or something and then took a rod and worked it up and down from both ends trying to pound the mud back out of the barrel.
Sad to say I no longer have this mold. Traded it off when the RB still wore the carbine barrel. It key holed every shot. No daubt it would work well with the rifle length barrel the RB now wears. Traded it for a 287308 Lyman, so far in the one test tried with this bullet, I have good feelings that the rifle barrel likes the 287308.
Last edited by brstevns; 05-27-2015 at 07:36 PM.
This describes my 7MM Rolling Block exactly. On top of that it has a jugged chamber. My rifle is original and even has the cleaning rod. After one trip to the range with cast bullets I gave up on it. I never tried jacketed bullets. That is a very expensive neighborhood and I just don't go there. I do have a beautiful half octagon barrel in 45-90 that will screw into the action but every time I say, I'm going to do it, I tell myself it's all original and loose heart and then I put it back in the safe. .
A GUN THAT'S COCKED AND UNLOADED AIN'T GOOD FOR NUTHIN'........... ROOSTER COGBURN
IMO, if it's "all original" and don't shoot, it's pretty much worthless. The ones that are "all original" and shoot, those are the really desirable pieces.
Try the 175 Hornady RN in that one that won't shoot cast. Over about 35 gr of
4064 mine will shoot into 1" at 100 yds.
Bill
If it was easy, anybody could do it.
^^^^^that bullet and load of either 30-31 or 4064 has been the ticket in a bunch of these rifles.^^^^^
if it won't shoot that combination re-barrel it and save yourself the aggravation of having a cool rifle that's nice to look at every now and then.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |