I just bought a japanese made 357 mag winchester lever action rifle. I was wondering if anyone had paper patched for that gun and if they had any advice to share??
I just bought a japanese made 357 mag winchester lever action rifle. I was wondering if anyone had paper patched for that gun and if they had any advice to share??
No direct experience, but if they'll feed without tearing the patch it should work great. The general principles of PP would apply. GW
"If you can walk with crowds and keep your virtue,
Or walk with Kings, nor lose the common touch,
Yours is the earth and everything that's in it,
And, which is more, you'll be a man my son!" R. Kipling
"Brother to a Prince, and fellow to a pauper, if found worthy." Kipling
If you seat the boolits out where they need to be to jam into the throat, it's not going to feed. But use a heavy boolit - 180 to 220 gr, load it over a case full of Lil' Gun, maybe a card wad between the powder and boolit, and watch out - you are within striking distance to 35 Rem ballistics and if your fitup is good it'll be very accurate.
-Nobade
About the only pistol powder I can get right now is h4227. And the only mold I can find is the lee 158 gas check mold. We'll see how it goes. The gun was unfired, and I'm still cleaning it up...
Fattest bullet that chambers will be your friend.
1,000,000 peso man
hmmmm minimal sizing down??
Size to .001" over BORE diameter, patch to be a thumb press in a fired case. Load to engrave the rifling when the action is closed. H4227 will work fine. The Lee 158 MIGHT be long enough to still be in the case depending on how your rifle is throated. If it is, you're good to go.
-Nobade
So, I slugged the bore. it's .347/.355. It's looks like a very short freebore in the barrel. I'll have to put the gun back together and see. Sounds like I need the bullets sized to .348?? Is that correct?? Bullet .001 over lands, and paper .001 over grooves??
1.405" to have a bullet seating into the lands...
Yep, that's it. Give it a go and see how it works.
-Nobade
Photos. We need photos! To satisfy our cravings for this addiction, you know. And test results. We need those too!
All the best in your endeavour and please keep us posted.
Rest In Peace My Son (01/06/1986 - 14/01/2014)
''Assume everything that moves is a human before identifying as otherwise''
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |