MiHec 9 mm 147 HP or 155 Solid 4 cav brass for alternativ coating

[Balta]

THIS GB IS CLOSED!!!!

This is Group Buy for MiHec 147 Hollow Point mold, or 155 grain Solid or 147 SOLID grain, for alternative coating-NO LUBE GROVE MOLD.

This mold is 4 cavity brass mold.Included is 2 sets of pins,one is hollow point and another set is for solid.There is no penta pins available for this mold.Top Punch for sizing at lubrisizing machines is included and also a small pack of mold lube.

This mold cast 147 grain Holow Point or 155-156 grain in SOLID.Mold can be cutt for 147 SOLID but in Flat Base version.

Bullet is with SMALL bevel base.

Weight can wary +/- 1-2 grains , depending in alloy used.Avaible diamter is .356,.357,.358, .359.

Price for Hollow point mold is 120 USD plus 20 USD for shipping.

Price for mold that cast only 155 grain bullets (SOLID) is 105 USD WITH shipping.

Price for mold that cast only 147 grain bullets (SOLID) is 105 USD WITH shipping.
Production start time is 6 to 8 Weeks.Updated to END OF SEPTEMBER 2014.

Expected minimum order quantity is 20 pcs but will start with production in announced time.
Post “I will take one “ and please give your disguised e-mail address ,and which diameter and weight you want.And how many molds you want.
Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...
Your order and info will be in list so please check is everything ok....
Hiere is bullet design.


Signup list:
Wacki „ -147 HP .356 ,
2. „Wacki“ -147 HP .358 ,
3. „g.man10mm“- 147 HP .357 ,gman10mmAT gmailDOTcom
4. „gman10mm“ -155 SOLID .358 ,gman10mmAT gmailDOTcom
5. „Blanco“-147 HP .357 , cnctooltekATyahoo DOT com
6. “Spawn-Inc” -147 HP .358, korn UNDERSCORE rocs AT hotmail DOT com
7. “Willis74” -147 HP .356 , gcs one 8 three at aol dot com
8. “alha” -4 x 147 HP .356,.357,.358,.359 snowserver (a*t) hotmail DOT com
9. “jeremiah.allen1”-147 HP ,.356 , jeremiah dot allen1553 at Gmail dot com
10. “BMKoeing” -147 HP .357, rommelbmk (at) comcast.net
11. “worker”-147 HP, .357 ?
12. “jayjay1” .147 HP ,.358 nutella-addicted(AT)webDOTde
13. “R1valdez” 147 HP,.357 , R1dv@yahoo dot com

[wacki]

I'll take one. Any diameter options? Will send email upon close.

can I get a top punch?

[Balta]

I'll take one. Any diameter options? Will send email upon close.

can I get a top punch?

Diameter options ar from 356 to 359 ,i forget for that sorry.Yes,top punch is included..

[wacki]

I'll take two.

.356
.358

both pins.

[Balta]

I'll take two.

.356
.358

both pins.

ok.Both pins ar included..

[g.man10mm]

Balta,

This looks perfect, thanks for putting this buy together.

I'll take a .357 HP mold and a .358 solid mold. g (dot) man10mm (at) gmail (dot) com.

[Whistler]

Is it possible to get pins to make it a round nose? If so, it is just what I'm looking for.
I know it was done for a .45 design that was both HP and RN where the pins were cupped for the RN part.

[Balta]

Is it possible to get pins to make it a round nose? If so, it is just what I'm looking for.
I know it was done for a .45 design that was both HP and RN where the pins were cupped for the RN part.

Sorry Whistler,that option is not available ! If you ar concern about feding different design from RN,this design will fed flawlessly.

[Blanco]

Ok Balta
I am such a fish......
I will take 1 of the 147 Gr. with HP and flat nose pins .357 Dia.
cnctooltek at yahoo dot com

Is there a list of buyers yet ?

[Balta]

Ok Balta
I am such a fish......
I will take 1 of the 147 Gr. with HP and flat nose pins .357 Dia.
cnctooltek at yahoo dot com


Is there a list of buyers yet ?

OK Blanco,
Yes i just a post a signup list..

[Spawn-Inc]

how much for shipping to Toronto, Ontario, Canada?

i'd like 1x 147gr HP/flat pins at .358 dia.

korn UNDERSCORE rocs AT hotmail DOT com. (no spaces between the underscore)

[Balta]

how much for shipping to Toronto, Ontario, Canada?

i'd like 1x 147gr HP/flat pins at .358 dia.

korn UNDERSCORE rocs AT hotmail DOT com. (no spaces between the underscore)

Shiping is flat,for all countrys.

[Spawn-Inc]

Perfect, I will take the one I posted above them.

[Balta]

Sign up list updated!!

[Willis74]

I'll take one. .356 hp
gcs one 8 three at aol dot com

[Balta]

Sign up list updated.

[aap2]

I have a (perhaps dumb) question: will the mold for the 155 grain solid be a Cramer-type with a set of pins for flat boolit noses or non-Cramer type with no pins at all? Thanks.

[Balta]

I have a (perhaps dumb) question: will the mold for the 155 grain solid be a Cramer-type with a set of pins for flat boolit noses or non-Cramer type with no pins at all? Thanks.

It will be non-Cramer type with no pins at all...just plain mold that can"t cast HP, just solid. HP mold will cast 147 HP with hp pins or 155 SOLID ,using flat pins.

[aap2]

thanks Balta; that's exactly what I wanted to know.

[Whistler]

Sorry Whistler,that option is not available ! If you ar concern about feding different design from RN,this design will fed flawlessly.

Can you please inquire about the extra pin set? For speed shooting competitions, the round nose is essential for fast reloads with a revolver. There is an increasing number of people using .38 Short Colt and the new 9mm revolvers (S&W 986 and 929).

It was said that there would be no round nose for the Mihec 230gn .45 HP-bullet, but everyone that ordered "all pins" got pins with a round nose cavity. I stood there with a long nose wondering why I ordered a no HP version when I could have had it all if I did.