RotoMetals2ADvertise hereMidSouth Shooters SupplyRepackbox
WidenersLee PrecisionTitan ReloadingInline Fabrication

Page 1 of 9 123456789 LastLast
Results 1 to 20 of 169

Thread: MiHec 9 mm 147 HP or 155 Solid 4 cav brass for alternativ coating

  1. #1
    I'm A Honcho! Balta's Avatar
    Join Date
    Apr 2012
    Location
    EUROPE
    Posts
    433

    Thumbs up MiHec 9 mm 147 HP or 155 Solid 4 cav brass for alternativ coating

    THIS GB IS CLOSED!!!!

    This is Group Buy for MiHec 147 Hollow Point mold, or 155 grain Solid or 147 SOLID grain, for alternative coating-NO LUBE GROVE MOLD.

    This mold is 4 cavity brass mold.Included is 2 sets of pins,one is hollow point and another set is for solid.There is no penta pins available for this mold.Top Punch for sizing at lubrisizing machines is included and also a small pack of mold lube.

    This mold cast 147 grain Holow Point or 155-156 grain in SOLID.Mold can be cutt for 147 SOLID but in Flat Base version.

    Bullet is with SMALL bevel base.

    Weight can wary +/- 1-2 grains , depending in alloy used.Avaible diamter is .356,.357,.358, .359.

    Price for Hollow point mold is 120 USD plus 20 USD for shipping.

    Price for mold that cast only 155 grain bullets (SOLID) is 105 USD WITH shipping.

    Price for mold that cast only 147 grain bullets (SOLID) is 105 USD WITH shipping.
    Production start time is 6 to 8 Weeks.Updated to END OF SEPTEMBER 2014.

    Expected minimum order quantity is 20 pcs but will start with production in announced time.
    Post “I will take one “ and please give your disguised e-mail address ,and which diameter and weight you want.And how many molds you want.
    Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...
    Your order and info will be in list so please check is everything ok....
    Hiere is bullet design.
    Click image for larger version. 

Name:	155-147 BB 9 mm.jpg 
Views:	199 
Size:	28.1 KB 
ID:	110535
    Click image for larger version. 

Name:	155-147 BB 9 mm.jpg 
Views:	179 
Size:	29.4 KB 
ID:	110536
    Signup list:
    Wacki „ -147 HP .356 ,
    2. „Wacki“ -147 HP .358 ,
    3. „g.man10mm“- 147 HP .357 ,gman10mmAT gmailDOTcom
    4. „gman10mm“ -155 SOLID .358 ,gman10mmAT gmailDOTcom
    5. „Blanco“-147 HP .357 , cnctooltekATyahoo DOT com
    6. “Spawn-Inc” -147 HP .358, korn UNDERSCORE rocs AT hotmail DOT com
    7. “Willis74” -147 HP .356 , gcs one 8 three at aol dot com
    8. “alha” -4 x 147 HP .356,.357,.358,.359 snowserver (a*t) hotmail DOT com
    9. “jeremiah.allen1”-147 HP ,.356 , jeremiah dot allen1553 at Gmail dot com
    10. “BMKoeing” -147 HP .357, rommelbmk (at) comcast.net
    11. “worker”-147 HP, .357 ?
    12. “jayjay1” .147 HP ,.358 nutella-addicted(AT)webDOTde
    13. “R1valdez” 147 HP,.357 , R1dv@yahoo dot com
    Last edited by Balta; 09-25-2014 at 02:58 AM. Reason: signup list update

  2. #2
    Boolit Buddy
    Join Date
    Jul 2013
    Posts
    154
    I'll take one. Any diameter options? Will send email upon close.

    can I get a top punch?

  3. #3
    I'm A Honcho! Balta's Avatar
    Join Date
    Apr 2012
    Location
    EUROPE
    Posts
    433
    Quote Originally Posted by wacki View Post
    I'll take one. Any diameter options? Will send email upon close.

    can I get a top punch?
    Diameter options ar from 356 to 359 ,i forget for that sorry.Yes,top punch is included..

  4. #4
    Boolit Buddy
    Join Date
    Jul 2013
    Posts
    154
    I'll take two.

    .356
    .358

    both pins.

  5. #5
    I'm A Honcho! Balta's Avatar
    Join Date
    Apr 2012
    Location
    EUROPE
    Posts
    433
    Quote Originally Posted by wacki View Post
    I'll take two.

    .356
    .358

    both pins.
    ok.Both pins ar included..

  6. #6
    Boolit Man

    Join Date
    Mar 2014
    Location
    Southeast AZ
    Posts
    96
    Balta,

    This looks perfect, thanks for putting this buy together.

    I'll take a .357 HP mold and a .358 solid mold. g (dot) man10mm (at) gmail (dot) com.

  7. #7
    Boolit Master Whistler's Avatar
    Join Date
    Aug 2009
    Location
    Sweden
    Posts
    519
    Is it possible to get pins to make it a round nose? If so, it is just what I'm looking for.
    I know it was done for a .45 design that was both HP and RN where the pins were cupped for the RN part.
    Shoot from a rest at 25/50/100 yards, then post your groupings. That is the only way to compare accuracy results.

  8. #8
    I'm A Honcho! Balta's Avatar
    Join Date
    Apr 2012
    Location
    EUROPE
    Posts
    433
    Quote Originally Posted by Whistler View Post
    Is it possible to get pins to make it a round nose? If so, it is just what I'm looking for.
    I know it was done for a .45 design that was both HP and RN where the pins were cupped for the RN part.
    Sorry Whistler,that option is not available ! If you ar concern about feding different design from RN,this design will fed flawlessly.

  9. #9
    Boolit Master
    Blanco's Avatar
    Join Date
    Jan 2014
    Location
    Cowtown / Ft. Worth
    Posts
    605
    Ok Balta
    I am such a fish......
    I will take 1 of the 147 Gr. with HP and flat nose pins .357 Dia.
    cnctooltek at yahoo dot com

    Is there a list of buyers yet ?
    Last edited by Blanco; 07-28-2014 at 11:31 PM.
    Do, or do not.
    There is no try.
    Yoda

  10. #10
    I'm A Honcho! Balta's Avatar
    Join Date
    Apr 2012
    Location
    EUROPE
    Posts
    433
    Quote Originally Posted by Blanco View Post
    Ok Balta
    I am such a fish......
    I will take 1 of the 147 Gr. with HP and flat nose pins .357 Dia.
    cnctooltek at yahoo dot com


    Is there a list of buyers yet ?
    OK Blanco,
    Yes i just a post a signup list..

  11. #11
    Boolit Buddy
    Join Date
    Apr 2012
    Location
    Ontario, Can!
    Posts
    363
    how much for shipping to Toronto, Ontario, Canada?

    i'd like 1x 147gr HP/flat pins at .358 dia.

    korn UNDERSCORE rocs AT hotmail DOT com. (no spaces between the underscore)

  12. #12
    I'm A Honcho! Balta's Avatar
    Join Date
    Apr 2012
    Location
    EUROPE
    Posts
    433
    Quote Originally Posted by Spawn-Inc View Post
    how much for shipping to Toronto, Ontario, Canada?

    i'd like 1x 147gr HP/flat pins at .358 dia.

    korn UNDERSCORE rocs AT hotmail DOT com. (no spaces between the underscore)
    Shiping is flat,for all countrys.

  13. #13
    Boolit Buddy
    Join Date
    Apr 2012
    Location
    Ontario, Can!
    Posts
    363
    Perfect, I will take the one I posted above them.

  14. #14
    I'm A Honcho! Balta's Avatar
    Join Date
    Apr 2012
    Location
    EUROPE
    Posts
    433
    Sign up list updated!!

  15. #15
    I'll take one. .356 hp
    gcs one 8 three at aol dot com

  16. #16
    I'm A Honcho! Balta's Avatar
    Join Date
    Apr 2012
    Location
    EUROPE
    Posts
    433
    Sign up list updated.

  17. #17
    Boolit Buddy
    Join Date
    Oct 2007
    Location
    peters township, PA
    Posts
    181
    I have a (perhaps dumb) question: will the mold for the 155 grain solid be a Cramer-type with a set of pins for flat boolit noses or non-Cramer type with no pins at all? Thanks.

  18. #18
    I'm A Honcho! Balta's Avatar
    Join Date
    Apr 2012
    Location
    EUROPE
    Posts
    433
    Quote Originally Posted by aap2 View Post
    I have a (perhaps dumb) question: will the mold for the 155 grain solid be a Cramer-type with a set of pins for flat boolit noses or non-Cramer type with no pins at all? Thanks.
    It will be non-Cramer type with no pins at all...just plain mold that can"t cast HP, just solid. HP mold will cast 147 HP with hp pins or 155 SOLID ,using flat pins.

  19. #19
    Boolit Buddy
    Join Date
    Oct 2007
    Location
    peters township, PA
    Posts
    181
    thanks Balta; that's exactly what I wanted to know.

  20. #20
    Boolit Master Whistler's Avatar
    Join Date
    Aug 2009
    Location
    Sweden
    Posts
    519
    Quote Originally Posted by Balta View Post
    Sorry Whistler,that option is not available ! If you ar concern about feding different design from RN,this design will fed flawlessly.
    Can you please inquire about the extra pin set? For speed shooting competitions, the round nose is essential for fast reloads with a revolver. There is an increasing number of people using .38 Short Colt and the new 9mm revolvers (S&W 986 and 929).

    It was said that there would be no round nose for the Mihec 230gn .45 HP-bullet, but everyone that ordered "all pins" got pins with a round nose cavity. I stood there with a long nose wondering why I ordered a no HP version when I could have had it all if I did.
    Shoot from a rest at 25/50/100 yards, then post your groupings. That is the only way to compare accuracy results.

Page 1 of 9 123456789 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check