White Label lube 45-45-10 results

[tazman]

I got my order of White Label 45-45-10 in early last week and tried it out.
It is runnier than I was expecting. Almost impossible to get too much of it on a boolit. The coating I ended up with could hardly even be seen.
I loaded up a bunch of them for my 9mm and ran them through it today.
First off the accuracy was top notch. No problems with feed or function.
I shot 50 rounds through the pistol before I checked the barrel because the accuracy never fell off.
When I checked the barrel I got a wonderful surprise. No leading whatsoever. It was as if I had been shooting jacketed or powder coated. Just a tiny bit of powder fouling. One dry patch and the barrel was clean.

This White Label formula is really great stuff!

[jmort]

The White Label 45-45-10 is a great product at a great price. Works real good.

[Bzcraig]

It does indeed work good and not near as messy as straight Alox/xlox.

[silverado]

How was the smoke? I would use alox but I shoot indoors and that stuff is nasty with low ventilation

[tazman]

As thin as the coating was, there was little smoke. I didn't even notice it.

[Moonman]

If you're into 45/45/10 Lubes, don't waste YOUR TIME/MONEY MAKING IT.

Just purchase WHITE LABEL LUBES X-LOX (Lar's name for his 45/45/10).

He does the work, mess, and sends it to you at a very reasonable price.

[Echd]

It's the best tumble lube and ships fast and is cheap- can't beat it!

[longarm85]

Thanks guy's i've been wanting to try White's lube 45-45-10 lube.....now all i need to do is order it....Thanks James

[Sgtonory]

I 2nd the same results as OP. Great stuff.

[kryogen]

going to test it on my 45 loads next time. I had cast and coated 500 bullets so I didnt want to remelt.

[flyingmonkey35]

Im in the same boat as Silverado, I shoot indoors with little ventation, I did not notice the smoke but the guys around me did.

have one of them stand on the side of you about 6 - 10 feet and record your shots, that will give you a True smoke test.

if i only shot outdoors that stuff is great. as long as you let it cure for a week or so.

I know only shoot ESPC boolits and haven't looked back.

[kryogen]

Espc takes 10x thetime to do.... Or more.

[flyingmonkey35]

True but the do look preety.

And punch holes in paper very well.

[AZPaul]

Just ordered some.

[jwber]

I really like the lube, however I gotta get better on my technique. I always have too much on them. I end up wiping the excess off after loading as I start to get junk build up in my searing die. Next batch I'm going to try putting way less and see what happens.

[nanuk]

If you're into 45/45/10 Lubes, don't waste YOUR TIME/MONEY MAKING IT.

Just purchase WHITE LABEL LUBES X-LOX (Lar's name for his 45/45/10).

He does the work, mess, and sends it to you at a very reasonable price.

I thought X-Lox was the WLL's version of LLA??? Not 45/45/10....

[Airman Basic]

I thought X-Lox was the WLL's version of LLA??? Not 45/45/10....

Delux Liquid X-Lox~45-45-10 is White Label's version

http://lsstuff.com/store/index.php?main_page=product_info&cPath=2&products_ id=31

[tazman]

White label has both X-lox and Deluxe X-lox 45-45-10
The X-lox is basically LLA in a larger bottle.
The Deluxe 45-45-10 is like recluse's formula only you don't need to make it yourself.
They also have X-lox 350 but I'm not certain if this is solid or liquid as they say it is the same stuff they use in their sticks.

[lar45]

The Xlox 350/Alox 350 has the consistency of a light grease and can be mixed with Beeswax to get a 50-50 lube.
The NRA forumula used Alox 2138F, but they don't make it anymore. The current replacement is Alox 350 which is a little thinner, so you need to add more wax to the mix to get to the same consistency.
Alox 350 is what we use in our 50-50, 2500+ and BAC stick lubes.

Yes the 45-45-10 needs just a very light coat.
I put 90 rounds through the 06 and then shot this group.

I did some load developement with the Ranch Dog TL-311-165RF(plain base) and think I"m pretty close to a good load.

That's 4 shots under .5" @ 85yds, I don't know what happened with the 5th one.
I ended up with 14gns of WC820 with a loaded length of 2.990", seated just into the lands.

This was before I built my shooting bench, so I just stacked up some plastic tubs and cardboard boxes to rest off of.

We loaded up 300 rounds of 45Colt and shot most of them through the SS Puma M92 with 24" bbl all in one weekend and the barrel was still clean. That was with a 265 LFN with conventional lube grooves, and lubed with 45-45-10.

[joelsteinbach]

Just placed my order