Any interest in a 460 version of the 358009
Have tooling in hand and can turn them out in a day or two if there is any interest
Bullet maker, maker
Swede Nelson
|
   
   
|
|
Any interest in a 460 version of the 358009
Have tooling in hand and can turn them out in a day or two if there is any interest
Bullet maker, maker
Swede Nelson
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
I'd kind of like to have a single cavity version to try in my .458 muzzle loader. Maybe a PB.
Mebbe a 1 cav with a big ol' HP pin in it.
KE4GWE - - - - - - Colt 1860, it just feels right.
or 4 cavities PB with a big ol' HP pin .. my socom crys for thisOriginally Posted by Beagle333
Mebbe a 1 cav with a big ol' HP pin in it.
[SIZE=4][B]Selling Hi Quality Powdercoating Powder
I carry a Nuke50 because cleaning up the mess is Silly !!
http://www.bing.com/search?q=nuke50&...7ADE&FORM=QBLH
I am not crazy my mom had me tested
Theres a fine line between genius and crazy .. I'm that line
and depending on the day I might just step over that line !!!
Should feed well and a lot cheaper than the 500 gr jacketed out of the sosomor 4 cavities PB with a big ol' HP pin .. my socom crys for this
just what I need another 500 ish mould
Schamankungulo
Matt. 5:14-16
GMCS USN ret.
Maybe, but its a little close to 500 & have 500s. Closer to 450 would really work for me.
i would send the money now for a 513 diameter version plain based. 2 cavity
I don't know why not. I was looking at the NOE website today for a 450-500 grain mold. I was surprised to see the largest was a 405.
"Mebbe a 1 cav with a big ol' HP pin in it." +1
This country has gone to hell but now there is hope for us.
So it looks like maybe we should offer this one in a single cavity HP
and maybe a RG2 cavity.
And see if it would work as a .512 dia. or .513 dia.?
Bullet maker, maker
Swede Nelson
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
Single cavity HP or the RG 2 sounds great.
I could be very happy with a single cavity, PLAIN BASE, with a HP pin- 450-ish weight sounds nice, as well- Let's keep the diameter in the .459-.460" range for those 45/70s out there, like mine!
Many thanks!
Chuck 358wcf
Last edited by 358wcf; 05-12-2014 at 11:46 PM.
.513 diameter rg2 with reversible flat nose would be perfect. sign me up.
RG2 .460 for me! This will just make the 458 AccRel fun to shoot. Clint
Swede, where are we at on this? Not enough interest yet?
Bump
what does RG stand for? I'd love a plain based round nosed bullet near 500 grainer at .460+ for my trapdoors. Been checking the NOE website for just this sort of thing for some time.
RG means it is a HP mold. There is a slotted piece of steel on the bottom of the mold (the Removable Guide) that holds the pin and it can slide back and forth to tip away from the block to dump the HP when you open the mold.
They look like this:
KE4GWE - - - - - - Colt 1860, it just feels right.
I'd be in for a RG2 PB.
How about a bump to the top?
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Smoke4320