A.C.E. Co 5.56 Heavy in $55 mold

[338RemUltraMag]

Here is a re-run of the 5.56 Heavy boolit that was featured in our large blocks, this will be cut in the $55 blocks and since I already have the cherry there is a no minimum block amount to make this a go.



Diameter: .227

Blocks:

2 Cavity $55

4 Cavity $100
6 Cavity $125

Lead time is 12 weeks

The molds will be made from 7075-T6 and will accept standard Lee handles.

Thank you
Joshua

[338RemUltraMag]

Purchasers:

1. tonyjones -- 2K AL checks
2. roysha
3. Roger Ronas -- 2K AL checks
4. Wayne S -- 4 cavity
5. wacki -- 6 cavity
6. frankg -- 2 cavity- 1K checks
7.quiver-2 cavity--top punch
8.Greg--2 cavity--top punch
9.Fla9-40--2 cavity--1k checks
10.Bullfrog54-2 cavity+ 1k checks
11.wacki-2 cavity PB + 2k copper checks

[sawzall]

Will this stabilize reliably in a 1:9 twist?

[Screwbolts]

Yes it will stabilize in 1x9 twist barrels. I shoots stable out of all 3 of my 1x9 barrels

Ken

[pretzelxx]

Great mould! I'm half tempted to buy the small one just because.

[Fishman]

I'll take one of these

Edit: Sorry I changed my mind. I am going to purchase the .311 144 gr mould you are making instead.

[tonyjones]

I'll take one as shown and 2K aluminum GC. TJ

[roysha]

I'll take a 2 cavity as drawn.

[Roger Ronas]

I'll take one with 2k gas checks (aluminum) also.
Roger

[Roger Ronas]

What size is everyone sizing to to work in a 5.56 1-9 twist 16" barrel
Thanks
Roger

[Screwbolts]

I am not everyone but .227 works for me. WD WWs, aged at least 10 days, softer alloy sizes in my die at .2265. Both dia. seem to shoot well.

Ken

[Roger Ronas]

Thank You, that's what I'll try then.
Roger

[Roger Ronas]

OK, my mistake. My barrel is a 1-7 twist. Will this still work?
roger

[runfiverun]

even better.
1-7 should keep this one straight down into some super slow velocity's.
I have a 1-7 in my 300 b.o. and a 1-8 in one of my AR's and have pushed things up and down with no problems both in boolit weight and velocity.

[Roger Ronas]

Thank You
Roger

even better.
1-7 should keep this one straight down into some super slow velocity's.
I have a 1-7 in my 300 b.o. and a 1-8 in one of my AR's and have pushed things up and down with no problems both in boolit weight and velocity.

[Wayne S]

I'll take a 4 cavity

[psychicrhino]

Looks like a nice mould

[338RemUltraMag]

A big thank you to all of the guys who answered the questions, I got it updated!

[wacki]

What grain size is this?

[Roger Ronas]

Per the drawing it is 75 grains

What grain size is this?