Lee 6 cavity sprue plates and levers BUY #2

[338RemUltraMag]

As the title states I am going to produce an aftermarket sprue plate for the Lee 6 cavity molds, this will be just the plate. It will be an exact replacement and use the same hardware as the existing plate. These will be CNC cut from 3/16 4140 steel. Before bluing we will sand the bottom of each plate and then buff them to ensure no burrs scratch your molds.

We will offer 2 hole sized small at .100 inch and standard at .130



We are looking at $15 dollars for these plates with a volume price of $12 if purchasing 7 or more.

Cam levers are $11 each and $10 if buying 7 or more.



Shipping on multiples will be 6 dollars for a small FRB and singles should be 3 bucks

Thank you for making the first buy a success, I have been swarmed with requests to run a second buy so here it is!

Thank you
Joshua

[338RemUltraMag]

Purchasers:

Levers: 19 ---- Plates: 21

1. Old Caster 3 plates 3 levers
2. Moonman 3 plates (1 small) 3 levers
3. wymanwinn 4 plates 4 levers
4. redriverhunter 1 plate
5. hiram 1 plate
6. fivegunner 2 levers
7. roysha 2 plates (one small) 2 levers
8.NHPaul 4 plates 4 levers
9.stuken3 7 plates 7 levers
10.ffried61 3 levers
11. flycutter 8 plates (1 small) 8 levers
12.CML-2 levers
13.KCcactus-3 plates
14.stu1ritter-1 plate 2 levers
15.jakec 2 levers
16.LongPoint-1 plate 1 lever
17.Nueces-12 plates (6 small hole) 4 levers
18.OuchHot!-3 plates (1 small) 2 levers
19.mactool- 15 plates 2 levers
20.g.man10mm 3 plates 4 levers
21. uncleskippy 2 levers
22.Spawn-Inc 3 levers (canada)
23.Caliboose-1 plate (sm holes) 1 lever
24.number7tn 1 plate 1 lever 1k copper checks
25.
26.
27.
28.
29.
30.

[Old Caster]

I will take 3 sprue plates with standard holes in plate and 3 cam levers. -- Bill --

[wymanwinn]

will count what i need tonite and get back to ya.....but i am in....

wyman

[Moonman]

338,

Per our PM's, I'll take;

3 Plates (1 small, 2 Regular holes .130)

3 Cams.

I plan on paying by PayPal

Thanks,
MOONMAN

[wymanwinn]

ok as promised...

4 plates all standard (130") hole...
4 levers....

wyman

[338RemUltraMag]

Updated

[redriverhunter]

i would like one spruce place standard at .130
thanks rrh

[Moonman]

Bump for BUY #2.

[hiram]

1 plate with .130 hole please.

[fivegunner]

I`ll take two levers.

[338RemUltraMag]

Updated

[NHPaul]

I would like 4 sprue plates with standard holes, troughed if you can. and 4 release levers. Thanks
Paul
paulmarquis (at) mac (dot) com

[Moonman]

Anymore orders guys, this is GB #2 on these.

MOONMAN

338,

Please UPDATE the list

NHPauls order is not on the list.

[Moonman]

Bump for end of month lookers.

[ultramag]

I tried to PM for some information on the difference between the .100" vs. .130" dia. holes and got no response. All my plates are .150" but am curious as to why I would want which one over the other. A 356-120-TC is the smallest caliber bullet I cast so far....most everything else in 6 cavity is .44 or .45. Thanks for any help.

Also, does anyone know when this GB closes?

[stuken3]

I'll take 7 plates and 7 levers please.

Thank you,

Ken,
stuken three at yahoo dot com

[ffries61]

I'll take 3 cam levers please

Fred

[FLYCUTTER]

7 plates and 7 levers, w/regular hole.
FLYCUTTER
edited: make that 8 plates, 7 regular holes and 1 with small holes and 8 levers.

[MrLootlam]

Joshua,

Have you made or Can you make plates for Lyman 4 cavity molds that operate the same as the LEE plates. I think the mold will work better and last longer if you didn't have to hammer on it.

Thanks,
MrLootlam