A.C.E. 2 cavity $55 300 BLK midweight boolit

[338RemUltraMag]

I am adding this mold to the $55 dollar buy, it is a scaled up/orbited 6.8 SPC boolit, when orbited up to .311 it measures out right And sits at approximately 140 gr.

Here is what the boolit will look like:



I will offer this in 2,4,and 6 cavity but the big seller here is the 2 cavity. Now for the details:

2 cavity $55

4 cavity $100
6 cavity $125

I will offer a PB version for an additional $10 if cut in the same mold.

This boolit should allow the 300 BLK to reach 1900-2000 fps it isnt a 130 gr like some wanted BUT we also do not have to worry about cherry lead time as it is already being ran as the 6.8 Boolit.

Diameters:

.309 (PC)
.311 (Greaser)
.314 (7.62x39)

Thank you all for your support!
Joshua Holtschneider
A.C.E. Co.

[338RemUltraMag]

Sign up list:

1. john hayslip .311
2. CENTIX BILL-311--top punch.
3. bucklind2 .311 -- 6 cavity
4. excess650 .311
5. Sgtonory .311--Top punch--1K CHECKS
6. Hardcast416taylor .314 -- top punch
7. FLYCUTTER .311 -- 6 cavity
8. runfiverun .310
9. pyrofx .311
10. garym1a2 - .310 PB -- 4 cavity
11. woody13 - .314 - 4 cavity
12. treekiller--.311
13. jmortimer - .310
14. jmortimer - .310
15. redleg0811 - .311
16. dh2 - .309--top punch
17. rockrat .311 - 6 cavity
18. jsavik .309 4 cavity
19. sfcairborne .311
20. cody9999 .310
21. nhrifle .311
22. brody .311
23. kelbro .310
24. CENTEX BILL .311
25. Fishman .311
26. minmax .311 PB
27. Pat303 .316
28. hicard .314
29. doctorggg .311--top punch--2k copper 30 checks
30. doctorggg .314
31. GoodAlloy .314 -- top punch
32. meademaker .311
33. SAJTU .311
34. ramhunter .311---1k copper 30 checks--top punch
35. ourflat .309 -- 6 cavity -- top punch -- 1K checks
36. angus6 -- .311 -- PB
37.gutpile--.314
38.Thecyberguy--.311
39.wacki--.311PB---etch dia--top punch
40.wacki--.309PB---etch dia--top punch
41.

[Cajun Max]

I will take a 2 cavity .309 pc with PB

[bucklind2]

I told you to put my name at the top of the list.

[338RemUltraMag]

I told you to put my name at the top of the list.

Dad!!! Dont bust my chops in front of my friends.... LOL

I assume .311? or do you want the PC .309?

[bucklind2]

Pc .309

[bucklind2]

We will chat tomorrow about number of holes and discuss size more when you go to work. Pretty sure .309 but you may convince me other wise.

[338RemUltraMag]

4 on board!

[garym1a2]

Is the one for .309 able to come with no lube groves and plain base?

[Sgtonory]

311 for me please. Looking forward to the 230 version also.

[338RemUltraMag]

Is the one for .309 able to come with no lube groves and plain base?

No sir, it is just smaller to accommodate the powdercoat

[blaser.306]

Will These drop right at .311" or a couple tenths larger with WW aloy ? I am curious as I would want to check and size to .311" for a 30 herrett ( it is a close to a pointy boolit as I have seen ) without heading into the 180 - 200 gr range. I could go .314" but I am concerned that with the disruption of lead in sizin and the shallow(ish) loob grove it may just go away completely.

[yondering]

I'm in for a 2 cavity .311"

Can you give some details on lead time and how payment will work?
Thanks.

[338RemUltraMag]

Will These drop right at .311" or a couple tenths larger with WW aloy ? I am curious as I would want to check and size to .311" for a 30 herrett ( it is a close to a pointy boolit as I have seen ) without heading into the 180 - 200 gr range. I could go .314" but I am concerned that with the disruption of lead in sizin and the shallow(ish) loob grove it may just go away completely.

These will drop right at .311 diameter with ww alloy, lead time is 10-12 weeks, will probably be cut with the 6.8 buy.

Joshua

[338RemUltraMag]

Payment will be made with either PayPal or check/mo

updated

[runfiverun]

josh I want one [2 cavity] but need to be closer to 310 than 311.
i'll accept a slightly smaller nose. [.301 on that small filler is fine]
going to 310 from 311 will wipe that angle on the front drive band too much for my rifles throat.

p.m. me and let me know if this is possible...Lamar

[338RemUltraMag]

josh I want one [2 cavity] but need to be closer to 310 than 311.
i'll accept a slightly smaller nose. [.301 on that small filler is fine]
going to 310 from 311 will wipe that angle on the front drive band too much for my rifles throat.

p.m. me and let me know if this is possible...Lamar

This is easily possible.

[pyrofx]

311 gc,2cav
Greg

[garym1a2]

I will like to take one .309 with plan base in 4 cavity please.

No sir, it is just smaller to accommodate the powdercoat

[ryokox3]

How much is shipping (conus)?

I will offer a PB version for an additional $10 if cut in the same mold.

I'm not sure I follow that, $10 for a mix of pb/GC or is it extra even if all are PB?