I originally expressed interest in this, so put me down for one please.
I am in the UK so will expect to stump up for more p&p.
Thanks for running this.
Regards to all.
Tony
I originally expressed interest in this, so put me down for one please.
I am in the UK so will expect to stump up for more p&p.
Thanks for running this.
Regards to all.
Tony
Got it Tony,
Will let you know additional postage cost when we get closer to ordering.
Thanks
SSB
Ok gentlemen,
We're still sitting on about 12 molds right now. I originally wanted to close this GB on 1/31/08, so......
Should we hold it open longer?
Should we let it die?
Input??
Thanks
SB
I vote for holding open for perhaps another 4 weeks.
I am not desperate!
Regards,
Tony
I'd run it a tad longer, let people get over the holiday season.
What would the extra be if we only went with twelve?
For fine firearms and shooting requisites visit my Web Site by clicking the link below:
Pukka Bundhooks
I'm in for one.
20111
Sean
Ok guys,
Gonna hold it open a while longer, but please speak up.
Thanks
SSB
I'll go for one!
84601
Swede Nelson
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
We've had some pretty good products from Lee lately, and I don't have anything in this weight catagory for the .32 Special, or the 8mm for that matter.
So, put me (83706) down for one of these.
Regards,
WE
I hope you will let this one run a few more weeks. I would be in for one, just need to get over Buckshots Fat Loverin.
LIMPINGJ,
Take your time, I'm gonna hold this buy open for a while longer. Gonna give people time to recover from the holidays. Post another note when you're ready to commit.
SSB
Gents,
Chances are real good that I'll get in on this GB.I like this lightweight idea.I have a
Win.m94 .32ws that is a dedicated cast bullet shooter.I do have some questions.
How well do expect this shorter bullet to shoot in a 1-16in. twist barrel?
Is this a tumble lube design?If not,do you think it'll work ok using Lee's lube and size kit?
Is it possible to see detailed dimensions on the bullet drawing?
I assume the mould come with handles?
I'm in no hurry so keep it open for awhile longer.
Thanks guys,
Vic
Vic,
I'm not sure on the twist question, someone else will chime in on that.
It is not a tumble lube design, it has conventional lube grooves. Some people use, and have good luck with, Lee sizers and conventional lube grooved bullets.
45 2.1 will have to chime in with detailed dimensions for you.
The mold DOES NOT come with handles, the handles are available seperately from suppliers such as MidwayUSA.
Any more questions, fire away.
SSB
I would like to be in on this GB. Zip code is 84663.
Thanks,
Michael
Sacrifice has been and will continue to be made. “FREEDOM is not free”.
I just purchased a 1948 Marlin 336A in 32 Winchester Special, so now I'm shopping for a mold. I plan on slugging the bore tonight, and if it's .322 or larger, I'll sign up for a mould.
John in Oregon
The diameter is spec'd at 0.326". With the loverin type bands, it will size easily down to about 0.321" with little distortion. We've done this with several other GBs of this band type and it works fine.
I would like to get in on this one. A nice plinker for my Turk 8mm.
Newtire,
I'll put ya down. What's your zip code??
SSB
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |