Loverin 311466 two cavity $55 mold

[338RemUltraMag]

Updated thread!

Mike is right, I really hesitate to put 2 identical bullet designs in the same mold if the only difference is .002

That sounds like a headache times 1,000,000

[338RemUltraMag]

OK, I'm in for a FAT one.

2 cavity .316

will the nose still be .302 ?

Nose will be .306 on your mold Jon

[Nrut]

I am in also!
One for sure, maybe two of different diameters..


For those who want a light bullet to PP for your 8X57 this mold be your "huckleberry"..

LOL

It will also be great in your 7.62X39 as a greaser as I am shooting the 311407 @ 183grs. in my CZ 527 now with great results!

Make mine a 4 cav. @ .314"

[338RemUltraMag]

Got ya down sir

[Bjornb]

2 cav .314 please.

[338RemUltraMag]

Thank you!

[Jeff Michel]

Is it possible to make one PB and one GC in the same mould? Additional cost?

[tygar]

I'll take one. I'll let you know the size.
Tom

OK .310

[PB234]

I am number 9 on the list. Please make mine at .314.

[Czech_too]

I'm in for a 2cav at .310

[JonB_in_Glencoe]

OK, I'm in for a FAT one.

2 cavity .316

will the nose still be .302 ?

Nose will be .306 on your mold Jon

I was afraid of that. That's gonna be too large for my rifle.

I'd like to revise my order to 2 cavity .314
and I hope and pray that the mold with my standard casting techniques and a alloy of 94-3-3, produce a boolit body diameter no smaller than .3135 and the nose no larger than .3040

[jmort]

Could you change mine to .310? Thanks

Also, would like a fatter nose .305 or .304 or what ever works for you with other orders. Or, I will take it as is, as design is sound. We are a picky bunch. From what little I know about this boolit, the fatter nose shoots better.

Also, sign me up for two molds.

Thanks

[JonB_in_Glencoe]

jmortimer,
I'm assuming from the drawing and 338's answer to me and the fact that these are cut by Cherry, that the following Noses sizes will correspond with the following body size.
.312 body = Nose .302
.314 body = Nose .304
.316 body = Nose .306
AND then...
.310 body = Nose .300

If I am incorrect, please let me know 338 !
Jon

[jmort]

Makes sense, I may have to go with two .312" molds. I spent some time reading about the design and the bigger nose seems to shoot better.

[WKAYE]

Do you ship to Canada ? If so, how much ? I would like 2 GC moulds. One .312 and one .314.
Thanks.

[338RemUltraMag]

Working on updating this, lots of questions! This is what I get for taking a few days off!

[338RemUltraMag]

Is it possible to make one PB and one GC in the same mould? Additional cost?

I can do it but the set up time is the same to do one or both cavities, $10 is the price.

[338RemUltraMag]

jmortimer,
I'm assuming from the drawing and 338's answer to me and the fact that these are cut by Cherry, that the following Noses sizes will correspond with the following body size.
.312 body = Nose .302
.314 body = Nose .304
.316 body = Nose .306
AND then...
.310 body = Nose .300

If I am incorrect, please let me know 338 !
Jon

This is exactly correct

[338RemUltraMag]

Makes sense, I may have to go with two .312" molds. I spent some time reading about the design and the bigger nose seems to shoot better.

I am putting you in for 2 .312 molds, let me know if this is right.

[338RemUltraMag]

Do you ship to Canada ? If so, how much ? I would like 2 GC moulds. One .312 and one .314.
Thanks.

Yes I do, I ship via flat rate boxes, a small box to you is $20