Loverin 311466 two cavity $55 mold

[338RemUltraMag]

Well, I see my name on the list, for the correct size. SO, now for the next important question; when do you want the money? mikeym1a

Normally these run around 8 weeks I will call for payment when they are ready.

[mikeym1a]

Thanks. mm

[True.grit]

Please add 1k alm checks to my order as well. Thanks

[bdicki]

I'm #13 please add 1k aluminum checks to my order.

[True.grit]

Joshua, If I want a .310 should I order a .312 and size down to .310? Your thoughts.??.Thanks

[338RemUltraMag]

Joshua, If I want a .310 should I order a .312 and size down to .310? Your thoughts.??.Thanks

That is a question I can not answer, look at the bore ride, if .302 is too large for your needs then get the smaller diameter mold as it will drop the bore ride to .300

The static fit is something you can not change by sizing, this is why it is critical to check these measurements. Dynamic fit is easily changed by different size dies. Things can be done to slightly adjust static fit but normally these need to be correct crom the start.

[Hardcast416taylor]

Joshua, I would like to change my desired dia. to a .310".Robert

[338RemUltraMag]

Fixed sir

[jmort]

Could you change my two molds to .310. I am #1 and #18 on the list? Sorry for hassle, but I put some more (too much) thought into this. Two .310" molds should work just fine, thanks

[JonB_in_Glencoe]

I guess I have been putting "too much thought" into this as well.
I really want to try one of your $55 two cav molds.
but I am thinking this isn't the design I want.
Sorry

Please take me off the list.

[True.grit]

OK I understand what you mean now. Thanks for the info, I will stick with .310. Thanks

That is a question I can not answer, look at the bore ride, if .302 is too large for your needs then get the smaller diameter mold as it will drop the bore ride to .300

The static fit is something you can not change by sizing, this is why it is critical to check these measurements. Dynamic fit is easily changed by different size dies. Things can be done to slightly adjust static fit but normally these need to be correct crom the start.

[Olevern]

I would like a 2 cav. in .312, please.
Olevern

[338RemUltraMag]

Updated

[missionary5155]

Greetings
Put me in for .......
One mold at .316 2 cavity
One mold at .312 2 cavity.
I confirm 2 (two) molds.
Send the PP handle and it will happen.
Mie in Peru

[MBTcustom]

Oh I just have to get in on this one!
If there's room left, please put me down for a two holer in .312 and I'd like 1K of your aluminum checks as well. Thanks Josh!

BTW, sgt.mike gave me a hundred or so of your checks to try. Very impressive!

[338RemUltraMag]

3 more sold, Thanks Tim for the kind words, you will not be disapointed with those checks!

[uscra112]

Can I still get in for a two-holer at .314 please? With one cavity de-checked, if possible.

Phil

[Bjornb]

Well now that Goodsteel bragged about your gas checks you may as well send me a thou. Thanks. Power of persuasion.

[338RemUltraMag]

Updated thread!

[PB234]

I am number 9 on the list. Please add a thousand gas checks to my order.