MiHec 9 mm NO LUBE GROVE mold for alternativ coating 135 or 125 grain

[Balta]

THIS GB IS CLOSED!!!

MiHec 6 cavity aluminum NO LUBE GROVE mold for „alternative coating method“ 9 mm in 135 grain BB or 125 grain FP

This mold is without Lube grove !!

There options of diameter in .356 ,.357,.358 i .359 .

If you ar using powder coat i recommend smaller diameter .356 ,don't have experience with HiTek or similar.
In 135 grain version bullet is with small bevel base, options in 125 grain ar Flat Base.
Weights ar based at WW alloy and .357 diameter so its possible with smaller or bigger diameter to have 1-2 grain down or up in weight.
Price is 85 USD + 15 USD for shipping.
Not sure how many molds gonna need for production start but this Will be very fast group buy ,cutter and blocks ar ready !
Post “I will take one “ and please give your disguised e-mail address ,and which diameter and weight you want.And how many molds you want.
Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...
Your order and info will be in list so please check is everything ok....

This is picture of 135 grain bullet from this mold,made by test mold...


After powder coating


And...ready to go.

In Sunday ,30 Marth i am going to range,will post results...
Range report :Shoot 200 rds trough my CZ 75SP01 and G17,sized at .357 ,no any kind of jams,problems with feeding etc...Very satisfied with this bullet.I shoot 135 grain bullets.Powder coated.


This is picture of Chinese Norinco 54 cal.7,62x25 TT pistol.It don't have nothing to do with this GB,this mold,bullet etc..Its just my cerakote finish work that turns up really good and i like to "show of"..sorry for that)


SIGN UP LIST:
1) „library“- 135 graina BB ,.357 – leaberry(AT) gmailDOTcom
2) „PB64“-135 grain BB , .358 - pw1340 (AT) yahooDOTcom
3) „cs86“ -135 grain BB ,.357 - chris_sones_1(AT) hotmailDOTcom
4) “AZBrian” 135 grain BB-.358 – sellsell(A) coxDOTnet
5) “Bangerjim” – 135graina .356 - jcp691(AT) coxDOTnet
6) „NHGrumpyGramps“-135 graina BB .357 -walker1313(AT) myfairpointDOTnet
7) „garym1a2“-135 grain BB .357 - garym1a2(AT) yahooDOTcom
8) “Mbedwell1971”-135 BB .358 –Mbedwell(AT) tripleadelisDOTcom
9) “freebullet” -125graina .356 – apexservicesomaha(AT)gmailDOTcom
10) “castalott”-135 grain BB .356- gardensngoats(AT)gmailDOTcom
11) „bmiller“- 135 graina BB .357 - dandbmiller (AT) hotmailDOTcom
12) “Rich22”-135 graina BB .357 - rtchase03AT gmailDOTcom
13) “MrWolf”-135 graina BB .358 – ronyulick(AT) verizonDOTnet
14) “kfarm” -135 grain BB .358 - kfarm0902(AT) gmailDOTcom
15) “stranded1980”-135 grain BB .357 -benjamin_strand(AT) yahooDOTcom
16) „willie pete“- 135 Grain BB .358 –cesaryw(AT) yahooDOTcom
17) „Redwood“-135 graina BB .357 – redwoode(AT) yahooDOTcom
18) „wazari“ -125 graina FB .358 - service_sc(AT) yahooDOTcom
19) „h1tdk00“-135graina BB -.356 - tkunz500(AT) attDOTnet-2 pcs
20) „BIGRED“-135 BB .357 - demers617(AT) gmailDOTcom
21) „Cloudwraith“-135 grain BB .358 – cloudwraith(AT) cloudwraithDOT Com
22) „swis 96/11“ -135 graina BB .357-bigrockfish7ataoldotcom
23) „Greg in va“-125 FP .358 -gdedavis at aol dot com
24) “Ironwood”-135 graina BB .357 -Ironwood of evergreen at yahoo dot com
25) “Smoke4320”-135 grain BB .357 - Smoke AT Paintball Kingdom dot com
26) “Valerko” -135 grain BB .358 -valerko(AT) optonlineDOTnet
27) “Maximumbob54”-135 grain BB - maximumbobby_54 AT yahoo DOT
28) “tiger762”-135 grain BB .356 - kef762(AT) yahooDOTcom
29) “BMKoenig”-135 grain BB .357 - Rommelbmk (at) comcast.net
30) „theTastyCat“-135 graina BB .356-Gerry dot senechal at geeeemail
31) “Mike Huges”-135 graina BB .357- mike.hughes1atyahoodotcom
32) “g.man10mm”-125 graina FB .357- g (dot) man10mm (at) gmail (dot) com
33) “jimbo 1950”-125 graina FB .356-jsm3443 at aol dot com
34) "CSH” -125 graina FB .358 -.358 diameter - shawnhoward31 at gmail dot com.

[library]

I'll take one

135gr, Bevel Base, .356 diameter, leaberry@gmail.com

Thanks!

[Love Life]

What are we looking at for a production time? A year or more? 2 months or less?

[Balta]

What are we looking at for a production time? A year or more? 2 months or less?

Like stated this wil be fast gruop buy, and you will have this mold in your hands for time period of maximum 2 months... First paypals can be expected in 30 days of gruop buy start! Is that fast enough?

[Rich22]

Definitely want one .357 debating the FB vs BB. Anyone want to chime in which would be the best for accuracy, loading ease with a case feeder etc. I would really like to hear since I have no experience with BB bullets.

[PB64]

I will take one, pw1340 at yahoo dot com, .356 135 grain bevel base. 1 six cavity mold.

[Balta]

Definitely want one .357 debating the FB vs BB. Anyone want to chime in which would be the best for accuracy, loading ease with a case feeder etc. I would really like to hear since I have no experience with BB bullets.

I am giving a small advantage to BB regarding loading but my first choice will be made according to bullet weight.Reload for IPSC shooting so i prefer to have bullets that performs better regarding recoil and speed of slide action.

[AZBrian]

This is 'dream-mold' for me - exactly what I have been hoping for. I will certainly get one of the 135 grain flavors with the bevel base. Need some help though...

Let me ask a question and see if I can get folks' feedback. I will use this for 38 special & .357 mag. I like to size bullets to make sure they are uniform. So - if I went with a .357 mold, sized to .356, and then powdercoated (adding a 1 mil coating all around), that would get me a .358 boolit - right (and I could take the xtra step to size to .358 after as well)? Does that sound like a good setup for 38 special/.357 mag?

I powdercoat all my boolits (with standard grooves) now but I start out with bigger diameter molds like .359 or .360 and then size to .358, powdercoat, and size to .358 again. With this mold, I want to be careful not to size and end up with a thin skirt of lead coming down around the bevel base. But I also don't want the thing too small and don't want just the PC engaging the grooves.

The other alternative would be to go with a .358 size mold, don't size after cast, powdercoat, and then size at .358.

What do you all think?

Thank you!
AZBrian

[Balta]

This is 'dream-mold' for me - exactly what I have been hoping for. I will certainly get one of the 135 grain flavors with the bevel base. Need some help though...

Let me ask a question and see if I can get folks' feedback. I will use this for 38 special & .357 mag. I like to size bullets to make sure they are uniform. So - if I went with a .357 mold, sized to .356, and then powdercoated (adding a 1 mil coating all around), that would get me a .358 boolit - right (and I could take the xtra step to size to .358 after as well)? Does that sound like a good setup for 38 special/.357 mag?

I powdercoat all my boolits (with standard grooves) now but I start out with bigger diameter molds like .359 or .360 and then size to .358, powdercoat, and size to .358 again. With this mold, I want to be careful not to size and end up with a thin skirt of lead coming down around the bevel base. But I also don't want the thing too small and don't want just the PC engaging the grooves.

The other alternative would be to go with a .358 size mold, don't size after cast, powdercoat, and then size at .358.

What do you all think?

Thank you!
AZBrian

I think that you cant miss with .358 mold..

[AZBrian]

Balta, thanks for the feedback. That was the way I was leaning after sitting here and thinking about it.

Please put me down for (1) 135gr, Bevel Base, 0.358 diameter mold.
sellsell(at)cox(d0t)net

Thank you!

[Balta]

Welcome!! Latest news..I arange wiht Miha to order molds in about 15 days ,so hurry up guys,i promise this gonna be a fastest gruop buy ever)

[btroj]

I am interested but want t know how you can get Miha to run this buy that fast when others have been waiting for 2 years on other buys?

[bmiller]

I will take one. dandbmiller at hotmail dot com

[cbrick]

I am interested but want t know how you can get Miha to run this buy that fast when others have been waiting for 2 years on other buys?

This is interesting. The last group buy I honchoed was over 2 years from starting the list to mold in hand and this is going to be done in 2 weeks?

Rick

[freebullet]

I have often wondered if such a design would work with tumble lube???
Anyone tried it?

[btroj]

It should work just as well with tumble lube.

[bangerjim]

I will take one 6 cavity mold.

jcp691 at cox dot net

135gn BB 0.356 size

bangerjim

[Balta]

I will take one. dandbmiller at hotmail dot com

Can you give me a bullet weight and diamater of mold you want?

[Balta]

Well its ben a wile from ordering test mold, posting to see interest and this group buy come at end of the story, the cutter is made and blocks ar ready.I have test mold in litle difrent design a almost a year ago..

[NHGrumpyGramps]

Please put me down for a 125 grain mold in 357 diameter.

walker1313atmyfairpoint dot net

Thanks