A.C.E. 300 BLK subsonic boolit

[Paulinski]

Could I change mine to .311 please?

[338RemUltraMag]

Could I change mine to .311 please?

Done sir

[wlc]

I just realized I didn't put down a size for my mold only that I wanted a plain base mold. .311 please.

[TimGS]

Put me down for one please, 0.311" plain base.

[wacki]

Quick question. What is the diameter of the powder coat option? I'm pretty sure I want to go with that.

I find your list sizes as odd. Missouri bullets do a .309 diameter (w/o powder coat) which is much smaller than your non-PC cast sizes. I'm a new to this game though.

[little willie]

Could a .311 be used either way, conventional lube or PC?

If wishing to PC, run thru a .309 sizer first, then PC and resize?

I would like the flexibility of both options but I would really rather not buy two moulds.

little willie

[braol]

Could a .311 be used either way, conventional lube or PC?

If wishing to PC, run thru a .309 sizer first, then PC and resize?

I would like the flexibility of both options but I would really rather not buy two moulds.

little willie

I have a couple 311 molds. I run them thru a .309 sizer after PC, works great. I cast, tumble coat the bullets, cure, then size.

[338RemUltraMag]

Quick question. What is the diameter of the powder coat option? I'm pretty sure I want to go with that.

I find your list sizes as odd. Missouri bullets do a .309 diameter (w/o powder coat) which is much smaller than your non-PC cast sizes. I'm a new to this game though.

The PC option is .002 smaller all around than the pictured molds, I do mean everything.

If you want a regular lube mold then get the .311

[Artful]

Just to be clear the PC option is designed to cast then immediately powder coat and bake correct? In otherwords no further processing is needed with a plain base PC design boolit.

[338RemUltraMag]

Just to be clear the PC option is designed to cast then immediately powder coat and bake correct? In otherwords no further processing is needed with a plain base PC design boolit.

So long as the PC is applied evenly and correctly all the PC version needs is a coat before shooting.

This is the theory anyway

[Smoke4320]

Probably need to run thru a Lee push thru sizer to be certain the bullet is round and all are the same finished size

do we have a close date for this mold yet ?

[338RemUltraMag]

Not yet, once I get my cherrys in I can give a set date.

[FLYCUTTER]

I'd like to get in on this. Put me down for a .311 GC. with your new style aligning pins.

[GoodAlloy]

I will take a 6 cavity .311" plain base.
Thanks, Andy

[GoodAlloy]

Correction. Please make mine a 3x3

[Artful]

So long as the PC is applied evenly and correctly all the PC version needs is a coat before shooting.

This is the theory anyway

And which Alloy is this theory working with to get the as cast .309?

[dagunnut]

I didn't give a size for my 3x3 please make it .311

[Smoke4320]

5. Smoke4320--PB .309

deleted ... keep as stated originally

[Moonie]

5. Smoke4320--PB .309

Please make mine to .311 PB .. I can always size down ..
Thanks

Keep in mind, you can only size down the driving bands, not the bore riding nose...

[Smoke4320]

Keep in mind, you can only size down the driving bands, not the bore riding nose...

very true .. forgot about that .. good catch