WidenersRepackboxInline FabricationLoad Data
RotoMetals2Reloading EverythingMidSouth Shooters SupplyTitan Reloading
Lee Precision Snyders Jerky
Page 2 of 2 FirstFirst 12
Results 21 to 22 of 22

Thread: 7.62x54r long range cast loads

  1. #21
    Boolit Buddy andrew375's Avatar
    Join Date
    Jul 2005
    Location
    uk
    Posts
    309
    I use the lee 185 gr. in my mosin exclusively, its a good bullet. For high velocity loads, that are needed for long range, try the same powders as for jacketed bullets, just less of course. My go to load is 34 gr. of vv n140 for around 2200 fps. Be aware that velocity drops off rapidly after 300 yards. If I was going to be shooting cast at long range often I would be using the heaviest bullet I could use. In my. 308 match rifle I use the Lee 200 gr. over the 150gr for 200 yards plus even though it doesn't group as good at 100.
    "Consciousness is a lie your brain tells you to make you think you know what you are doing." Professor Maria Goncalves.

    If liberty means anything at all, it means the right to tell people what they do not want to hear. George Orwell.

  2. #22
    Boolit Grand Master In Remembrance
    Join Date
    Aug 2005
    Location
    South Jersey
    Posts
    6,314
    http://stevespages.com/310_2.html
    Read form sniper rounds ... https://en.wikipedia.org/wiki/7.62%C3%9754mmR
    Pick your bullet weight for long range.
    Last edited by John Boy; 11-22-2020 at 06:03 PM.
    Regards
    John

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check