Al,
How about a rerun of your 358 128 gr. RF-PB, with HP pins to cast about a 115 gr HP 9mm?!? It would make a great companion for your 358 135 gr FN-PB RG that drops a 128 gr. HP for 9mm. By adding the 128 gr RF/115 gr HP, you would have the 2 most useful HP bullet weights for the 9mm covered.
Sign me up for one!
Dave
Last call on the 288-132Gr-FN-(7mm-Thor)
Running this one fast - 2 weeks and its about to go to the shop
get your order in if you want one!
Bullet maker, maker
Swede Nelson
Last edited by SwedeNelson; 05-13-2014 at 03:29 PM.
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
a 700 grain 513 diameter wfn would be perfect. something with a metplat about .375
Bump to stay on first page
Bullet maker, maker
Swede Nelson
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
I'd like to see RG2 360-160 SWC GC.
Can this be made with a heavier weight?Originally Posted by SwedeNelson
I'm in for one.
kens
Sorry - would need new tooling to do much more
They are on the mill and should be finished soon
Bullet maker, maker
Swede Nelson
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
Swede,
Just out of curiosity, do you have a plan for inventorying some of the "oddball" mold designs once you get the new operation fully up to speed? I'm thinking that I'd be waiting a long time to get 15 players lined up for my .416 Rigby mold, and there are undoubtedly a few like that on the want list.
A dedicated "oddball" mill? A few bucks extra per mold to justify the existence of the "oddball" mill and slower movers on the shelf?
WWJMBD?
In the Land of Oz, we cast with wheel weight and 2% Tin, Man.
Al,
I receive my 311332 yesterday. Looks like a great design. As always.
This is the first one I have with the new horizontal vent lines. That's kinda different.
Thanks
Dave
Dave
That's one of the many things that we have been able to do with the new equipment
The new shop has made a very big difference in what we can do.
Bigslug
We are working on "oddball" stuff - hope to be able to do more soon
We do stock more than 1200 moulds and have about 180 different designs now
Thanks for being great customer's
Bullet maker, maker
Swede Nelson
Last edited by SwedeNelson; 05-20-2014 at 07:24 PM.
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
Just added some 312440 148Gr. RN to stock
http://noebulletmolds.com/NV/index.p...sort=2a&page=5
Bullet maker, maker
Swede Nelson
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
Just added some 360429 168Gr. SWC to stock
http://noebulletmolds.com/NV/index.p...sort=2a&page=3
Bullet maker, maker
Swede Nelson
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
Received the 7mm Thor today. Thank You Al
any Group Buys For
225 dia 60g Saeco 221 5 Cav 0 in stock on your web site
or
225 dia 55g RCBS 22-055 5 Cav 0 in stock on your web site
I have a Ar that has never see a Lead boolet !!
thanks
Anybody interested in an RCBS 45-201-SWC? It is close to an H&G 68, but mine drops at 210-215 grs. with a little broader and blunter nose than the 68, A 5 cavity NOE would sure be nice.
Last edited by 376Steyr; 05-26-2014 at 12:06 PM.
Check their site again, I ordered a 5 cavity no groove mold last night. Had plenty more in stock, that is if you'd like the plain base grooveless version of that Saeco 221
Just listed the 453 238Gr. SWC (453423) Group Buy moulds
Still working on the Brass moulds - hope to have them the first of next week
Bullet maker, maker
Swede Nelson
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
Nice!
Would it be possible to maybe do a mixed cavity 5 cavity aluminum mold? Like with 2 cavities 358 135 RF BB and 3 cavities 358 128 RF ???
Swede I tried to post a I want one on your new board and can't seem to find the reply button that is supposed to be there.
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
