NOE LINKS to Group Buys

[SwedeNelson]

This is a link page to the new GROUP BUYS we have going
Check here often for new buys and up dates on active ones

HOW WE RUN OUR BUYS

We list / post all our buys below for easy access and use.
We list the date started and the number of orders so you can see there progression.

When a buy reaches 15 orders, tooling will be ordered, it takes about a week to 10
days for the tool grinder to do his magic - some times sooner
As soon as we get the tooling the buy will go to the mill - we try to keep this no longer
than a week.

We keep 500 blank mould block and 1500 sprue plates on hand at all times and can
run 35 to 50 moulds a day with our new equipment.

As soon as the moulds come off the mill we will list them on the website and send
out a PM with instructions on how to buy and a discount code.

If a buy does not get 15 orders or it takes longer than 6 months to get 15 orders
it will be evaluated at that time and either will be closed or ran with a additional
cover charge.

It is the number of orders and how soon a buy gets them that determines
how fast it will be ran.

NEW GROUP BUYS

460 500Gr. FN (RCBS 82054) started 2/26/14 ( 8 orders )

360 154Gr. WFN now in BRASS started 3/27/14 ( 4 orders )

360 148Gr. HBWC now in BRASS started 3/27/14 ( 4 orders )

412 238Gr. WFN now in BRASS started 3/27/14 ( 6 orders )

454 265Gr. WFN now in BRASS started 3/27/14 ( 0 orders )

502 383Gr. RF started 3/27/14 ( 2 orders )

360 180Gr. RF (BRP 640 nose) started 3/28/14 ( 6 orders )

367-100Gr-RF-(RD 9x18-Makarov) started 3/28/14 ( 0 orders )

459-535Gr-RN-(457132-POSTELL) started 3/28/14 ( 1 orders )

363 150Gr RN (38 S&W) started 4/11/14 ( 6 orders )

311-150Gr-SP-(311414) started 5/15/14 ( 17 orders ) This buy is closed!

260-113Gr-RN-(260325) started 5/15/14 ( 2 orders )

NOE 287-168Gr-SP-(RCBS)-287-168Gr-SP-MOD started 5/21/14 ( 6 orders )

NOE 454 290Gr. RF (RD SC454-290-RF) started 6/7/14 ( 0 orders )

NOE 454 290Gr. RF Tumble Lube (RD TL454-290-RF) started 6/7/14 ( 0 orders )

NOE 453 210Gr. RF (BD) started 6/12/14 ( 1 orders )

NOE clone of RCBS-270-SAA started 6/20/14 ( 1 orders )

NOE 321 130Gr. FN (321008) started 6/20/14 ( 6 orders )


INTEREST THREADS


43-Mauser-Group-Buy RCBS 44-370-FN
http://castboolits.gunloads.com/show...user-Group-Buy

NOE-460-480Gr-RN-(460009)
http://castboolits.gunloads.com/show...Gr-RN-(460009)

NOE-452-200Gr-SWC-(RCBS-45-SWC)
http://castboolits.gunloads.com/show...BS-45-SWC-SWC)

Requested moulds on this thread
311041 rerun (Inventory ran 2/22/14 check the website)
360 180Gr. (BRP) (Group buy started - see above )
257325 113Gr. RN (Interest Thread started - see above )
502 383Gr solid with HP (Group buy started - see above )
461 350Gr solid with HP
454 300Gr solid with HP
378 300Gr solid GC
340 250Gr solid GC
225 75Gr solid GC
356404 95Gr. FN
416 400Gr (Rigby)
9.3 rerun (Inventory ran 4/6/14 check the website)
225 62Gr. FN (MX3-22-EX) rerun (Inventory ran 3/2/14 check the website)
311414 150Gr. SP (Interest Thread started - see above )
500294 rerun
311466 152Gr. RN
314008 rerun (Inventory ran 3/24/14 check the website)
432640
312440 rerun (Inventory ran 5/20/14 check the website)
454 260Gr. WFN
311241 125Gr. RN
312 165Gr.SIL (RCBS)
225462 57Gr. RN
225107 rerun (Inventory ran 3/8/14 check the website)
45-500-BPS clone (need information )
460 405Gr. M1873 HB
460 500Gr. M1884
311441 117Gr. FN
6.5mm 125Gr. SP
314 75Gr. RF (RD)
225353 43Gr. FN
316299 rerun (Inventory ran 3/16/14 check the website)
266455 127Gr. RN Loverin
266469 141Gr. RN Loverin
314 155Gr. FN rerun
41 200Gr. SWC (Keith)
311291 rerun
350319 167Gr. RN
350457 250Gr. FN
457130 145Gr. Collar button
358160 150Gr. Heel
416-350-FN RCBS (RG4)
311227 90Gr. RN
H&G #938
314466 152Gr. Loverin rerun
311407 MOD 170Gr. rerun (Inventory ran 5/9/14 check the website)
326407 MOD 190Gr. rerun
266455 RN Loverin w/FN

If there is something you would like to see ran post here or send us a PM

We are also looking for samples of any of the above listed for our library
If you have some you would like to submit send them to:
NOE Bullet Moulds
1030 S 350 E
Provo, UT 84606

We have worked very hard the last 4 or 5 months to get our new shop up and running
And "put together" a workable group buy system.
We are not making any great promises and offering any supper reduced prices.
We are here for the long haul and will be making bullet moulds for a very long time.



Both Matt and my self (Swede) thank you for being great customers and welcome all
you new ones.

Regards
NOE Bullet Moulds
Swede Nelson

[SwedeNelson]

List of completed buys

453 238Gr. SWC (453423) started 3/27/14 ( 17 orders ) COMPLETED 5/30/2014
http://castboolits.gunloads.com/show...r-SWC-(453423)
RAN and ready to ship - order on our website

288-132Gr-FN-(7mm-Thor) started 4/25/14 ( 16 orders ) COMPLETED 5/17/2014
http://castboolits.gunloads.com/show...-FN-(7mm-Thor)
RAN and ready to ship - order on our website

311 190Gr. SP (311332) started 2/24/14 ( 18 orders ) COMPLETED 5/14/2014
http://castboolits.gunloads.com/show...11332-190Gr-SP
RAN and ready to ship - order on our website

260 85Gr. FN (260283) started 2/18/14 ( 15 order ) COMPLETED 4/27/2014
http://castboolits.gunloads.com/show...260283-85Gr-FN
RAN and ready to ship - order on our website

323 180Gr. RF (RD) started 12/1/13 ( 10 orders ) COMPLETED 4/9/2014
http://castboolits.gunloads.com/show...-180Gr-RF-(RD)
RAN and ready to ship - order on our website

359 190Gr. RF (RD) started 12/1/13 (7 orders) COMPLETED 4/9/2014
http://castboolits.gunloads.com/show...-190Gr-RF-(RD)
RAN and ready to ship - order on our website

301 172Gr. PP (301618) started 2/18/14 ( 23 orders ) COMPLETED 4/2/2014
http://castboolits.gunloads.com/show...01618-172Gr-PP
Completed and shipped

301 212Gr. PP (301620) started 2/18/14 ( 14 orders ) COMPLETED 4/2/2014
http://castboolits.gunloads.com/show...01620-212Gr-PP
Completed and shipped

[AZBrian]

"If there is something you would like to see ran post here or send us a PM"

I'd like a 311041. I'd be super happy to buy one with a HP option as well.

[Ramslammer]

G'Day Swede
What about the BRP .360 180 grn with the 640 nose? I'd order a RG4 straight up. This would be a good light boolit for the .35 REM and a good heavy boolit for .357 Mag. You have a picture of it on your page but I couldn't work out how to post it. I've got your rcbs clone but reckon something lighter would be good. Also this design would be better than some of the RF ones (I've also got you 180rf).
thanks
Juddy

[square butte]

Hope you are still going to put up the Lyman 260(257)-325 that we got you samples for

[Blammer]

Sweeet!

[tygar]

This is a link page to the new GROUP BUYS we have going
Check here often for new buys and up dates on active ones

NEW GROUP BUYS
323 180Gr. RF (RD) started 12/1/13 ( 7 orders )
http://castboolits.gunloads.com/show...-180Gr-RF-(RD)

359 190Gr. RF (RD) started 12/113 (4 orders)
http://castboolits.gunloads.com/show...-190Gr-RF-(RD)

260 85Gr. FN (260283) started 2/18/14 ( 1 order )
http://castboolits.gunloads.com/show...260283-85Gr-FN

301 172Gr. PP (301618) started 2/18/14 ( 11 orders )
http://castboolits.gunloads.com/show...01618-172Gr-PP

301 212Gr. PP (301620) started 2/18/14 ( 7 orders )
http://castboolits.gunloads.com/show...01620-212Gr-PP

INTEREST THREADS
311 190Gr. SP (311332)
http://castboolits.gunloads.com/show...1332-Group-Buy

460 500Gr. FN (RCBS 82054)
http://castboolits.gunloads.com/show...0-FN-for-45-70

If there is something you would like to see ran post here or send us a PM

Thanks for the interest
Swede Nelson

Hi, received the 454 325gr yesterday. Nice, thanks. Will PM you on stuff.

I would like: .502 385gr solid with HP at 375gr m/l GC & PB
.461 350gr solid with HP at 340gr m/l GC
.454 300gr solid with HP at 290gr m/l GC with nose short enough to cycle in Rossi 92 .454 Cassul
.378 300gr solid GC
.340 250gr solid GC
.225 75gr solid GC if it will fit mag & keep GC in the neck

Thanks
Tom

[dkf]

I would like a copy of the Lyman 356404 like discussed in this thread. Maybe even an hp option. A 3 or 4 cavity would suit me ok.(drop .358)

http://castboolits.gunloads.com/show...-of-the-356404

[Bigslug]

Saw recently that you had specs for a gas checked 400 grain .416 Rigby bullet. I want one!

[Fishman]

A 9.3 rerun or new design maybe?

[PWS]

G'Day Swede
What about the BRP .360 180 grn with the 640 nose? I'd order a RG4 straight up. This would be a good light boolit for the .35 REM and a good heavy boolit for .357 Mag. You have a picture of it on your page but I couldn't work out how to post it. I've got your rcbs clone but reckon something lighter would be good. Also this design would be better than some of the RF ones (I've also got you 180rf).
thanks
Juddy

I'll second this suggestion! Need a good heavyweight with a longer nose for a Smith 686.

[TreeKiller]

Another run of 225 62Gr. FN 5 cavity GC (MX3-22-EX)
Please

[winelover]

I'm interested in the discontinued 150 grain, gas checked spitzer, 311414.

Winelover

[guicksylver]

Al Thanks for the 311332.
We'll see where it goes.
There has been almost 1000 hits on the
original post. Dan

[FLYCUTTER]

Al, I would like to see you run that round nose bullet for the 500 S&W again. You ran it a couple of years ago as a solid or RG. I missed out on the group buy and never seen it on your site.

[SwedeNelson]

Updated list

Keep the requests coming - will see what we can make happen!

Bullet maker, maker
Swede Nelson

[bwgdog]

Al - With the new machines is it possible to do different sizes on the molds ? example 311332 a.310 with .300 nose. Have numerous tight bore 30,s ie swiss-Bartlein-Kreiger Also love the other greats- 211299-311284 with other sizes available. I am aware there is other vender that will make these to size ordered but wanted to ask if it is now able for you to do with the popular rifle boolits ? Out of the 10+ 30 cal NOE molds that I have there are 5 designs that I would like in other sizes at this time. Please note discussion is on rifle boolits only. Also have interest if you are able to do any other tapered rifle boolits-ex sae 315 in different weights-sizes ? tia bwgdog

[kbstenberg]

Has anyone else asked about a copy of Edds 7mm Thore bullet?
I would also like a 311467

[Hardcast416taylor]

Saw recently that you had specs for a gas checked 400 grain .416 Rigby bullet. I want one!

The BRP .416 400 gr. mold I got from Bruce had 2 crimp grooves and was designed for use in the .416 Rigby and the .416 Taylor.Robert

[badgeredd]

I'd love to see a clone of the Ideal 311467. Perhaps add a medium sized meplat to the nose?

Edd