Inline FabricationLee PrecisionLoad DataTitan Reloading
RotoMetals2WidenersMidSouth Shooters SupplySnyders Jerky
Repackbox Reloading Everything
Results 1 to 9 of 9

Thread: Question on duplicating factory Winchester Cowboy Action Load

  1. #1
    Boolit Mold Smiling Bob Masterson's Avatar
    Join Date
    Dec 2007
    Posts
    4

    Question on duplicating factory Winchester Cowboy Action Load

    Hi all,

    Anybody got a recipie to duplicate factory Winchester Cowboy Action load for .44 Special with 240grain lead flat nose 750fps muzzle velocity?

    Thanks,
    Smiling Bob Masterson

  2. #2
    Boolit Buddy
    Join Date
    Jan 2007
    Posts
    125
    I pulled out my Lyman cast bullet handbook and it shows 6.9 grains of Unique giving 767 fps, that's their max load at 13,000 psi, still pretty mild, or about 9.5 grains of Blue Dot, or about 12.5 gains of 2400, the latter two are mid-level loads for those powders. That's for a 245 grain lead SWC, 1.571 OAL. Those should get you in the ballpark.

  3. #3
    Boolit Master Morgan Astorbilt's Avatar
    Join Date
    Sep 2007
    Location
    Golden Valley, NC
    Posts
    917
    If you're looking for a good light load, my cowboy action load for 250gr. flat nose in .45LC is 4.25gr. Bullseye. It's about as light as you can get with reliable velocity, and should work in .44spl. also. And nobody will call them "mouse fart or gamer loads"

    Morgan Astorbilt SASS#59279

  4. #4
    Boolit Buddy Ghugly's Avatar
    Join Date
    May 2007
    Location
    Central California
    Posts
    332
    I've become kind of fond of Trail Boss. It's clean and damned near idiot proof. And, it was designed for Cowboy Action shooting.

    http://www.imrpowder.com/data/handgu...ss-feb2005.php
    Last edited by Ghugly; 12-14-2007 at 03:48 AM. Reason: Added url

  5. #5
    Boolit Master

    Join Date
    Nov 2007
    Location
    Mtn West
    Posts
    2,188

    44 CAS load

    2nd on the Trailboss- ideal for that purpose. Works best with high expansion ratio cartridges like the 44 Spcl. Don't know what the Winchester load recipe is but would imagine it's a fast powder like Trailboss, 700X or Bullseye under a fairly soft cast slug.

  6. #6
    Boolit Buddy Blackhawk Convertable's Avatar
    Join Date
    Nov 2007
    Location
    Rochester, Minnesota 55901
    Posts
    187
    That's what I'm shooting in my pistols for Cowboy Action. 5 grains of Trail Boss will be a perfect load for you.

  7. #7
    Boolit Mold
    Join Date
    Nov 2006
    Location
    Anderson, CA USA
    Posts
    23
    SBM,

    I am running 5.2 of Trailboss in my 44 spls. This was the load that gave the best groups in my Rugers. The other load that I use is 6.0gr of Unique. They have both worked admirably for CAS and general plinking.

    Will

  8. #8
    Boolit Master freedom475's Avatar
    Join Date
    Oct 2007
    Location
    Rocky Mountains of Montana
    Posts
    604
    another vote for Trail Boss

  9. #9
    Boolit Buddy
    Join Date
    Aug 2007
    Posts
    368
    Like Morgan, I shot 45LC rather than 44 in Cowboy shooting, but the calibers have a lot in common as far as load characteristics. Unique has always been recommended as a very good and common powder for mid-range loads, but I found that for my guns, accuracy was only so-so with it until I got close to maximum loadings. Then it was scary how accurately a load the Unique would produce. This was in all 4 of my Colt SA's.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check