Perfect . Thanks
back to the top, sign up guys, this is a winner lets get it on mihas table this year
I'll go for a 2 cavity HP.
tbrolliniAT gciDOTnet
I'm #5 on the list. Please change to a 4 cavity with all pins.
Thanks!
Please put me down for one 4 cavity mold with all pins...
nathancampbell79 at gmail .com
Here's my results from the first attempt at developing a load for my 30/06. all with 2400. I was actually looking for more vertical stringing, but I guess I wasn't far enough back. next time, same test at 100 yards. the black dot above the holes is a rough zero for non-cast 165 gr load. This was with forend resting on a camp chair. 3-shot groups at 19, 19.5, 20, 20.5 gr of 2400:
With some work, it will be a winner!
OK. Sign me up. 4 Cavity Cramer with all pins.
laynel (at) bigfoot (dot) com
Last edited by Dubbel El; 04-02-2014 at 02:19 AM.
1 4 cavity mold with all the pins please.
eric at whitetiger blog dot com
See Some of My Holster Work Here:
www.whitetigerleatherworks.com
I take a 4 cavity mold with all the pins please.
coydog 9260 at yahoo dot com
Life Member of NRA,NTA,DAV ,ITA. Also member of FTA,CBA
I'll take a 4 cavity with all pins.
1dbbehr at cox dot net
1DBBEHR
I'm in 4 cavity all pins an handles brianwhetsel at msn dot com
Have any of you shot this from an AR10 platform? Ive got an LMT and am curious if anyone has used this boolit in a semiauto.
Thanks Cody
"Light travels faster than sound. That's why most people seem bright until you hear them speak."
It works fine in an Armalite although I'm not loading it to work semi-auto.... much to destructive at the velocity needed. It feeds slick as a gut just dropping the bolt though and shot to the rifles zero at 50 yards.
On another thought, I got to try this boolit in one of the new Mossberg 308 rifles with the AR-10 style (not that AR-10 mags work, the system is DPMS style mags) mags. Boolit fed 100% with slight bump on the edge of the meplat showing and it nose engraves lightly when seated correctly. It looks like it will do quite well in those rifles.
Could you give a time frame on when this will be done. I need to know so I can be sure I have $ ready when needed.
I hate to commit now and be broke when the time comes.
I'm game. A 4-cavity with HP pins for me, please kef762 AT yahoo dot com
OK but what if at this time I decide to get in but when the money is called for I can not follow through? I really hate being undependable but I would be. That is why I am asking. I would like to have the mold but don't want to or cant commit with absolute certainty that I will be able to follow through when that unknown time comes. Please advise.
One 2-cavity with HP pins
mhkilgore...at...mac...decimal...com
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |