Just wondering if there was any experience out there for this boolit yet.
Was thinking about this as a plinker for my 9mm to stretch my lead supply.
Just wondering if there was any experience out there for this boolit yet.
Was thinking about this as a plinker for my 9mm to stretch my lead supply.
Uh oh, I just found the next mold I'm gonna buy. I bet it would be a dandy in my Kel-Tec PF9. Also gives me an excuse to buy a .380 pistol!
Last edited by FergusonTO35; 02-06-2014 at 02:59 PM.
Currently casting and loading: .32 Auto, .380 Auto, .38 Special, 9X19, .357 Magnum, .257 Roberts, 6.5 Creedmoor, .30 WCF, .308 WCF, .45-70.
I was wondering if it would work the slide enough to be dependable without souping it up. I was thinking to try it in my wife's S&W Shield which uses the same recoil spring in the 9mm and 40 S&W.
I HAVENT.
I am happy with the Lee 125 gr RNFP in my 9mm and 38/357
It is mild over 2.8gr of 231
Yes sir, I love it! I load it in both 380 and 9mm. My LCP loves it.
I cast up almost 300 already. Unsized, Im loading with a small charge of RedDot. Mine are tumble lubed in 45/45/10 and allowed to dry overnight. I'm also applying a plain based gas check to some for a milder than normal load in 9mm. Loads like they were made for each other.........lol.
HV
Life's biggest tragedy is we get old too soon, and wise too late.
I have used them to good success in .380 and .38 spl, sized .356 and .359, over Red Dot.
Thanks for all the info people.
Looks like I need to get one of these. It sure will stretch out my lead supply. I will get 15 extra bullets per pound of lead over the 120tc.
I don't have that mold but one time I purchased 1500 Makarov lead bullets (RN95gr). I decided to not pursue the makarov loading so I sized them to .358" and have been shooting them in 380 and 9 Luger.
In the same vein I mold 160gr 45's to conserve lead.
Becky and I also dig out our ex-business paper berm every year and remelt the bullets we find.
"The purpose of the law is not to prevent a future offense, but to punish the one actually committed" — Ayn Rand
After pretty extensive experiments, I settled on a 95 grain bullet (358242) loaded over the minimum charge of Bullseye (3.9 grains) for 9mm practice / plinking. It is very accurate, hits very close to POA, and does not lead the barrel even with range scrap bullets, I think because of the very low pressure (about 20,000). I suppose the Lee 95 grain bullet would have similar properties. LBS
I'm not sure where all the money is that I've "saved" by casting and reloading!
For posterity, I'll add that 3.9 grains Bullseye with the 358242 95 grains was touch too light; the action did not always function. Almost out of Bullseye, I tried this bullet again with Universal. 4.9 grains Universal is working great. LBS
Last edited by Low Budget Shooter; 06-03-2015 at 04:31 PM.
I'm not sure where all the money is that I've "saved" by casting and reloading!
I have been using this boolit and a medium load of Titewad with excellent results. Good accuracy, perfect function, and low recoil.
Actually, I was a little surprised this thread got resurrected.
I didn't want to leave that too-light load data sitting there for newbies to find. By the way, how do you find time to post on the internet. Why aren't you shooting that new Model 60-4 right now!?
I'm not sure where all the money is that I've "saved" by casting and reloading!
I am retired and in the process of moving. While I shoot the 60-4 as often I can, I need to take time to do the other necessary things.
Being retired, I have time to do a lot of things.
Now that you mention it, I should probably load some 38 specials with the 95 grain boolit and see how they shoot in my 60-4.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |