Messy catch system

[robpete]

I'm still very new to the Star. I don't even think I broke the 2k mark(yet). My only gripe is that I can't find away to catch the bullets without lube, from the dropping bullet transferring everywhere. In some cases, the lube even gets knocked out of the groove. I currently use a bracket and Akrobin. Any suggestions? Thanks!

[btroj]

I use the same system you are using.

The lube used makes a huge difference. Some lubes easily come out of the grooves, some leave a mess on other bullets, some don't do either.

Keep the heat, if used, low as possible.

[kayak1]

My guess is your heat is up to high. When I have the heat down the lube won't get knocked out of the groves.

[robpete]

I'm using C-red. I will try lowering my temp today. Thanks guys.

[robpete]

Do you guys think BAC or 50/50 would be a better lube for this sizer?

[A pause for the COZ]

I switched to BAC, but what I found for myself was adding an air kit really made the whole process simpler.

[ReloaderFred]

I use the Magma lube, since everything else I tried had one problem or another. The Magma lube stays in the lube grooves, and does a good job on all my handgun bullets, which is mostly what I cast. It's also about as cheap a lube as you'll find.

Hope this helps.

Fred

[robpete]

I switched to BAC, but what I found for myself was adding an air kit really made the whole process simpler.

I do run Magma's air kit. I'll order some BAC on my next order. I just got a max size flat rate envelope of the red and will have to run through it first.

[454PB]

BAC is very sticky and should help with your problems.

[wingnut49b]

I'm using Carnauba Red, and don't have trouble. Granted, it's been pretty cold in northern IN lately. I'd check the heat.


Andy

[kayak1]

Carnauba red works great in my star. Keep the heat around 100 - 105F (Get a fish tank stick on thermometer).

[trixter]

Carnauba red works great in my star. Keep the heat around 100 - 105F (Get a fish tank stick on thermometer).

Now that is a great idea. That is why I read this forum all the time, mining the gems.

[Beagle333]

If you use a PID on your pot, get another thermocouple (about 3 bucks) and JB-Weld it to the side of your Star, plug your heater in to the PID and let it keep your heat within 1 degree of perfect!