Snyders JerkyReloading EverythingRotoMetals2Repackbox
Inline FabricationTitan ReloadingLee PrecisionWideners
MidSouth Shooters Supply Load Data
Page 1 of 5 12345 LastLast
Results 1 to 20 of 89

Thread: MiHec 454423 brass two or four cavity Cramer HP or solid

  1. #1
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099

    MiHec 454423 brass two or four cavity Cramer HP or solid

    [B]MiHec 454423 brass two or four cavity Cramer HP or solid[B]
    This is a previously run boolit and is available in 0.454" as a plain base. The previous GBs have shot very accurately in everything we've tried it in.

    This GB is Closed.....


    For the two cavity solid, the price is $75 with plus $15 shipping.

    For the two cavity Cramer HP, the price is $90 with one set of pins included plus $8 per extra pin set if wanted plus $15 shipping.

    For the four cavity solid, the price is $90 with plus $15 shipping.

    For the four cavity Cramer HP, the price is $120 with one set of pins included plus $16 per extra pin set if wanted plus $20 shipping.

    Cramer Pin options: 1) large HP, 2) small HP, 3) penta HP, 4) cup HP, 5) blank pins for solid.

    If the HP pins are not suitable for reversal to a solid, the blank pins come with the price of the mold. If you do not want the HP pin sticking out of the base of the mold, in the case of reversible pins, you can order a set of blank pins for a smooth mold bottom.

    Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... It is my understanding the invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

    Prices are somewhat variable due to the exchange rate.... be aware of this.

    Please give your disguised e-mail address and the number of molds and type you want.
    Sign Up List:
    1. harley45.....eric at comcast dot net.....One 4 cavity Cramer with large HP pins
    2. GLL.....gllewis at pasadena dot edu.....One 4 cavity Solid
    3. BruMatt.....jmwbruce at a0l dot com.....One 4 cavity Cramer with all pins
    4. ramhunter.....yukonmarco at gmaildotcom.....One 2 cavity Cramer with large HP pins
    5. BruMatt.....Jmwbruce at a0l.c0m.....One 4 cavity Cramer with large, cup & blank pins
    6. Luis R..... M40A1 at sbc global dot net.....One 2 cavity Cramer with large pins
    7. Beagle333.....shutupandjump at yahQQ dot cQm.....One 2 cavity Cramer with all pins
    8. AZBrian.....sellsell(at)cox(d0t)net.....One 4 cavity Cramer with all pins
    9. .45Cole.....45stingray at gmail .com.....One 4 cavity Cramer with penta, small and cup HP pins
    10. ddixie884.....dgilbert07 at windstream dot net.....One 4 cavity Cramer with penta, large, cup HP and blank pins
    11. Jupiter7.....John(dot)tucker78@yahoo(dot)com.....O ne 4 cavity Solid
    12. Olevern.....midimizeatwildbluedotnet.....One 2 cavity Cramer with small and blank pins and One 4 cavity solid
    13. Dubbel El.....laynel (at) bigfoot (dot) co.....One 4 cavity Cramer with all pins
    14. Loc n Load.....Wewestjr01at frontier dot com....One 4 cavity Cramer with large, penta, small and blank pins
    15. WARD O.....wolsonat rfgdistributing dotcom.....One 2 cavity Cramer with penta and cup HP pins
    16. Plan IX.....Awebb (at) teamwebb (dot) net.....One 2 cavity Cramer with all pins
    17. photomicftn.....bclosius at myacc dot net.....Two 4 cavity Cramers with all pins and Two sets of handles
    18. gtgeorge.....gspatton(at)gttransmissions(dot)com.. ...One 4 cavity Cramer with small, large, cup HP and blank pins
    19. mike454.....mike454 at gmail dot com.....One 4 cavity Solid
    20. oger.....weedle at astound dot net.....One 4 cavity Solid
    21. maderawood6.....maderawood6 at geemaledotc0.....One 4 cavity Cramer with large, penta HP and blank pins
    22. Spillway.....1craigabrownatgmaildotcom.....One 4 cavity Solid
    23. doctorggg.....gggmmg at verizon dot net.....One 2 cavity Cramer with large, penta and blank pins
    24. dntfxr.....Dntfxr77 at yahoo dot com.....One 2 cavity Cramer with large pins
    25. 12vx2.....sHuRtsATgiLaNeTdotCoM.....One 4 cavity Cramer with all pins
    26. Sgt Petro.....aaron petroski AT GMAIL dot com.....One 2 cavity Cramer with all pins
    27. Nueces.....mhkilgore....at....mac....decimal....co m.....One 4 cavity Solid
    28. Jayhawkhuntclub.....Jayhawkhuntclub (aT) hotmail dot com.....One 2 cavity Cramer with large, cup and blank pins
    29. wordsmith.....wordturd71 at gmail d0t com.....One 4 cavity Cramer with all pins
    30. TNRELOADER.....janddpainting at twlakes dot net.....One 2 cavity Cramer with large and penta pins
    31. osteodoc08.....tom garcia 1 5 at yahoo dot com.....One 4 cavity Solid
    32. GunSmyth.....nicholasldavis at msn dot com.....One 4 cavity Cramer with large, small & cup HP pins
    33. pps.....ericwverheul (at) hoTmail dot com.....One 2 cavity Cramer with all pins
    34. alha.....snowserver (at) hotmaildotcom.....One 4 cavity Cramer with all pins
    Attached Thumbnails Attached Thumbnails MiHec454423 Rerun.jpg  
    Last edited by 45 2.1; 09-26-2014 at 05:18 PM.

  2. #2
    Boolit Master
    Join Date
    Mar 2005
    Location
    Indiana
    Posts
    805
    I'll take a 4 cavity with the large hp pins eric at comcast dot net
    See Some of My Holster Work Here:
    www.whitetigerleatherworks.com

  3. #3
    Boolit Master
    GLL's Avatar
    Join Date
    Mar 2005
    Location
    California
    Posts
    3,580
    I will take a 4-cavity solid. gllewis at pasadena dot edu

    For reference:


    The MP and LEE are both Group Buy runs of 45 2.1 design. The MP is an earlier run and the LEE was the second 6-cavity Group Buy I ran years ago. The Ballisti-Cast is the old #502 H&G design. The LYMAN is one of several modifications made through the years.

    Jerry
    Last edited by GLL; 02-27-2014 at 12:18 PM.
    S&W .38/44 Outdoorsman Accumulator

  4. #4
    Boolit Master
    Join Date
    Mar 2005
    Location
    Indiana
    Posts
    805
    This is perfect timing I think I have come up with an idea for the perfect carry gun for me (this week anyway) and with this boolit I'm betting I can use the commander for hog hunting!
    See Some of My Holster Work Here:
    www.whitetigerleatherworks.com

  5. #5
    Boolit Master

    Join Date
    Apr 2012
    Location
    State of Denial
    Posts
    4,244
    Put me down for a four cavity with the following three pin sets:

    CupHP
    Large HP
    Flat bottomed for sitting pretty on my hotplate when casting them as solids.

    A dot ASDOROTHY at VERIZON dot NET

    Erik
    WWJMBD?

    In the Land of Oz, we cast with wheel weight and 2% Tin, Man.

  6. #6
    Banned
    Join Date
    Jul 2013
    Location
    Virginia
    Posts
    1,243
    Quote Originally Posted by 45 2.1 View Post
    MiHec 454423 brass two or four cavity Cramer HP or solid

    Please give your disguised e-mail address and the number of molds and type you want.
    Sign Up List:
    1.
    Is this the same one we were talking about on the discussion board, or 2 separate molds.
    Thanks
    Tom

  7. #7
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099
    Quote Originally Posted by tygar View Post
    Is this the same one we were talking about on the discussion board, or 2 separate molds.
    Thanks Tom

    Same one.............

  8. #8
    Banned
    Join Date
    Jul 2013
    Location
    Virginia
    Posts
    1,243
    Quote Originally Posted by 45 2.1 View Post
    Same one.............
    Ok,whichever thread I still want a 2 cavity, .454 HPs
    Thanks
    TOm

  9. #9
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099
    Quote Originally Posted by tygar View Post
    Ok,whichever thread I still want a 2 cavity, .454 HPs
    Thanks
    TOm
    Read the first post and post the required information..................

  10. #10
    Boolit Bub
    Join Date
    Apr 2011
    Location
    Just north of Idaho
    Posts
    52
    I'm in for this one as well :

    2 cavity cramer large HP.

    yukonmarco at gmaildotcom

    thanks ramhunter

  11. #11
    Boolit Bub
    Join Date
    Nov 2012
    Posts
    67
    Please put me in for a 4C HP with large and small pins.
    Jmwbruce at a0l.c0m

  12. #12
    Banned
    Join Date
    Jul 2013
    Location
    Virginia
    Posts
    1,243
    Quote Originally Posted by tygar View Post
    Ok,whichever thread I still want a 2 cavity, .454 HPs
    Thanks
    TOm
    2 cavity .454, all HP pins + solid pin
    tbrolliniATgciDOTnet

  13. #13
    Boolit Grand Master

    Beagle333's Avatar
    Join Date
    Mar 2012
    Location
    Back in the woods a piece, just outside Auburn, AL.
    Posts
    5,499
    I'd like one 4-cav solid, please.
    shutupandjump at yahQQ dot cQm
    KE4GWE - - - - - - Colt 1860, it just feels right.

  14. #14
    Boolit Buddy AZBrian's Avatar
    Join Date
    Sep 2013
    Location
    Chandler, AZ
    Posts
    108
    I'd like one 4 cavity HP mold with all pin sets.

    sellsell(at)cox(d0t)net

    Thank you!

  15. #15
    Boolit Master

    Join Date
    Apr 2012
    Location
    State of Denial
    Posts
    4,244
    Mr Honcho, Sir,

    Update me for all pin sets, blanks included. #3 on the list. Thanks!
    WWJMBD?

    In the Land of Oz, we cast with wheel weight and 2% Tin, Man.

  16. #16
    Boolit Grand Master

    Join Date
    Jun 2013
    Location
    NW GA
    Posts
    7,243
    Not on list yet. Will Cancel at this time as bought similar locally.
    Last edited by osteodoc08; 02-06-2014 at 10:31 AM. Reason: Cancelled order

  17. #17
    Boolit Master .45Cole's Avatar
    Join Date
    Jun 2008
    Location
    Colorado
    Posts
    616
    First of all,
    Thank You for doing this 45 2.1. I appreciate you keeping the options open for everyone too.

    one(1) 4cav HP with cup, penta, and small pins
    45stingray at gmail .com

  18. #18
    Boolit Master



    ddixie884's Avatar
    Join Date
    Jul 2005
    Location
    Avery, Texas
    Posts
    1,309
    I'll take a four cavity with large, cup pointed, penta, and flat pins. My e-mail is in my signature....
    JMHO-YMMV
    dd884
    gary@2texastrucks.com
    Gary D. Peek

  19. #19
    Boolit Master Jupiter7's Avatar
    Join Date
    Mar 2013
    Location
    Dyer, TN
    Posts
    1,307
    I'm in

    2cavity flat and large HP pins

    John(dot)tucker78@yahoo(dot)com
    Last edited by Jupiter7; 02-08-2014 at 12:10 AM.

  20. #20
    Boolit Master
    Join Date
    Aug 2006
    Posts
    1,384
    Please count me in for one 2 cav. with small and flat pins
    Olevern
    midimizeatwildbluedotnet
    "The trick is to stop thinking of it as 'your' money" (Tax Auditor)

    Life is not waiting for the storm to subside, life is about learning to dance in the rain.

Page 1 of 5 12345 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check