Snyders JerkyRotoMetals2MidSouth Shooters SupplyLoad Data
Titan ReloadingInline FabricationWidenersLee Precision
Repackbox Reloading Everything
Page 1 of 7 1234567 LastLast
Results 1 to 20 of 136

Thread: MiHec HBWC Rerun... .38, .41, .44 & .45 Cal.

  1. #1
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099

    MiHec HBWC Rerun... .38, .41, .44 & .45 Cal.

    This is about the second run of these designs. This will be a two or four cavity cramer brass HP mold in either HBWC or solid base. See each illustration for what individual WC's weigh.

    This GB is Closed...

    For the two cavity mold, the price is $85 with one set of pins included plus $8 per extra pin set if wanted plus $15 shipping.

    For the four cavity mold, the price is $120 with one set of pins included plus $16 per extra pin set if wanted plus $20 shipping.

    If the HP pins are not suitable for reversal to a solid, the blank pins come with the price of the mold. If you do not want the HP pin sticking out of the base of the mold, in the case of reversible pins, you can order a set of blank pins for a smooth mold bottom.

    Pin options: 1) HBWC, 2) blank pin for flat base

    Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at some time determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... It is my understanding the invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.

    Prices are somewhat variable due to the exchange rate.... be aware of this.

    Please list your Forum name and your disguised e-mail address in suitable form, the base type wanted... either hollow base wad cutter (HBWC) or solid base (blank pin), the caliber you want, either a 2 or a 4 cavity mold and the number of molds you want.

    Sign-up lists:

    The 358395 38 Caliber wadcutter part of this GB is Closed
    38 Caliber - 358395 mold
    1. jmortimer.....middleearthsalesandservice at gmail.com.....One two cavity 38 mold with all pins
    2. ashlyngr.....ashlyngrATcomcastDOTnet.....One four cavity 38 mold with all pins
    3. AZBrian.....sellsell(at)cox(d0t)net.....One four cavity 38 mold with all pins
    4. Beagle333.....shutupandjump at yahQQ dot cQm.....One two cavity 38 mold with all pins
    5. blaser306.....barclaypainter( at ) shaw ( dot ) ca.....One four cavity 38 mold with HB pins
    6. BK7saum.....Bradleyk4860 AT gmail DOT com.....One four cavity 38 mold with all pins
    7. BruMatt.....Jmwbruce at aol dot com.....One two cavity 38 mold with all pins
    8. IIJSavoy.....iijsep at gmail dot com.....One two cavity 38 mold with all pins
    9. 454gene.....erballmann AT sbc global DOT net.....One four cavity 38 mold with all pins
    10. kayak1.....jason at@ kates DOT DOT org.....One four cavity 38 mold with all pins
    11. CML.....chronic subsonic at g mail .com.....One two cavity 38 mold with all pins
    12. Coltman.....randy at northspoon dot net.....One four cavity 38 mold with all pins
    13. doctorggg.....gggmmg at verizon dot net.....One two cavity 38 mold with HB pins
    14. J.. .....jon /at/ westernbullet dot c o m.....One four cavity 38 mold with HB pins
    15. Reload_em.....reload40s AT gmail DOT com.....One two cavity 38 mold with all pins
    16. mookiie.....mookiie2005 at comcast dot net.....One four cavity 38 mold with all pins
    17. bakrzdzn.....bakrzdznATyahooDOTcom.....One four cavity 38 mold with HB pins
    18. Indio.....Indio308 at hot mail dot com.....One four cavity 38 mold with HB pins
    19. Loc n Load.....Wewestjr01ATfrontierDOTcom.....One four cavity 38 mold with all pins
    20. mpbarry1.....mpbarry1 at gmail dot com.....One four cavity 38 mold with all pins
    21. 41mag.....41mag (at) peoplepc (dot ) com.....One two cavity 38 mold with all pins
    22. Stevtrains.....Stevtrains at aol.....One four cavity 38 mold with HB pins
    23. ballistim.....ballistim(at)yahoo(dot)com.....One four cavity 38 mold with all pins
    24. MostlyOnThePaper.....kc5vtk at comcast dot net.....One four cavity 38 mold with all pins
    25. Duffy.....grnmchn at msn dot com.....One four cavity 38 mold with all pins and One set of handles
    26. alamogunr.....alamogunr(AT)charter(DOT)net.....One two cavity 38 mold with HB pins


    The 411395 41 Caliber wadcutter part of this GB is Closed
    41 Caliber - 411395 mold
    1. photomicftn.....bclosius at myacc dot net.....One two cavity 41 mold with HB pins
    2. RJM52.....vitalsupplynh at gmail dot com.....One four cavity 41 mold with all pins
    3. BK7saum.....Bradleyk4860 AT gmail DOT com.....One two cavity 41 mold with all pins
    4. Loc n Load.....Wewestjr01ATfrontierDOTcom.....One four cavity 41 mold with all pins
    5. J.. .....jon /at/ westernbullet dot c o m.....One four cavity 41 mold with HB pins
    6. colt_saa.....Colt_saa at Rocketmail dot Com.....One four cavity 41 mold with HB pins
    7. 41mag.....41mag (at) peoplepc (dot ) com.....One two cavity 41 mold with all pins
    8. Forrest r.....forresth at windstream dot net.....One two cavity 41 mold with HB pins

    The 432395 44 Caliber wadcutter part of this GB is Closed
    44 Caliber - 432395 mold
    1. dkf.....krflff2 at dejazzd dot com.....One two cavity 44 mold with all pins
    2.
    3. BruMatt.....Jmwbruce at aol dot com.....One two cavity 44 mold with all pins
    4. IIJSavoy.....iijsep at gmail dot com.....One two cavity 44 mold with all pins
    5. CML.....chronic subsonic at g mail .com.....One two cavity 44 mold with all pins
    6. Loc n Load.....Wewestjr01ATfrontierDOTcom.....One four cavity 44 mold with all pins
    7. Coltman.....randy at northspoon dot net.....One four cavity 44 mold with all pins
    8. J.. .....jon /at/ westernbullet dot c o m.....One four cavity 44 mold with HB pins
    9. WallyM3.....wally(dot)murray3(at)gmail(dot)com.... .One two cavity 44 mold with HB pins
    10. Old School Big Bore.....cctxsniper at ya of the hoo of the dot of the com.....One four cavity 44 mold with HB pins
    11. Red333.....jefhover at tds dot net.....One two cavity 44 mold with all pins
    12. alamogunr.....alamogunr(AT)charter(DOT)net.....One two cavity 44 mold with HB pins

    The 453395 45 Caliber wadcutter part of this GB is Closed
    45 Caliber - 453395 mold
    1. Beagle333.....shutupandjump at yahQQ dot cQm.....One two cavity 45 mold with all pins
    2.
    3. Red333.....jefhover at tds dot net.....One two cavity 45 mold with all pins
    4. BruMatt.....Jmwbruce at aol dot com.....One two cavity 45 mold with all pins
    5. Loc n Load.....Wewestjr01ATfrontierDOTcom.....One four cavity 45 mold with all pins
    6. J.. .....jon /at/ westernbullet dot c o m.....One four cavity 45 mold with HB pins
    7. WallyM3.....wally(dot)murray3(at)gmail(dot)com.... .One two cavity 45 mold with HB pins
    8. 41mag.....41mag (at) peoplepc (dot ) com.....One two cavity 45 mold with all pins
    9. Coltman.....randy at northspoon dot net.....One four cavity 45 mold with all pins
    10. Forrest r.....forresth at windstream dot net.....One two cavity 45 mold with HB pins
    11. Gunslinger1911.....gunslinger1911 (at) Columbus (dot) rr (dot) com.....One four cavity 45 mold with all pins
    Attached Thumbnails Attached Thumbnails MiHec Wadcutters.jpg  
    Last edited by 45 2.1; 04-07-2014 at 08:54 AM.

  2. #2
    Banned



    Join Date
    Jan 2011
    Location
    Color Me Gone
    Posts
    8,401
    Put me down for 358395 blank pin/solid base two cavity

    Not sure what to add, it says "two cavity" as for email

    middleearthsalesandservice at gmail.com

    Sorry this is like herding cats. Hope this works
    Last edited by jmort; 01-29-2014 at 01:34 AM. Reason: Email

  3. #3
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099
    Quote Originally Posted by jmortimer View Post
    Put me down for 358395 blank pin/solid base two cavity
    I need more information: e-mail address and # of cavities in mold?

  4. #4
    Boolit Mold
    Join Date
    Mar 2012
    Location
    Lancaster, Pa.
    Posts
    25
    I'm ashlyngr, and Bruce A. Overholt ( ashlyngrATcomcastDOTnet). I would like one 4 cavity 358395 HBWC 148 gr mold with the included HB pin set, and the extra blank pin set.

    Thank You, 45 2.1
    Bruce
    Last edited by ashlyngr; 01-30-2014 at 11:19 AM. Reason: e-mail

  5. #5
    Boolit Buddy AZBrian's Avatar
    Join Date
    Sep 2013
    Location
    Chandler, AZ
    Posts
    108
    Please put me down for one 4 cavity 358395 HBWC 148gr mold with all pin sets.

    sellsell(at)cox(d0t)net

    Thanks!
    Brian

  6. #6
    Banned
    Join Date
    Jul 2013
    Location
    Virginia
    Posts
    1,243
    I could go for the 45. 2 cavity.
    Thanks
    Tom

  7. #7
    Banned
    Join Date
    Jul 2013
    Location
    Virginia
    Posts
    1,243
    Quote Originally Posted by tygar View Post
    I could go for the 45. 2 cavity.
    Thanks
    Tom
    reversed with HP out would put a hurt on a guy short range

  8. #8
    Boolit Grand Master

    Beagle333's Avatar
    Join Date
    Mar 2012
    Location
    Back in the woods a piece, just outside Auburn, AL.
    Posts
    5,499
    Total of two molds:
    one each of 358395 and 453395, both two cavities, all pins.
    shutupandjump at yahQQ dot cQm.

    Thank you!
    Chuck.
    KE4GWE - - - - - - Colt 1860, it just feels right.

  9. #9
    Boolit Master blaser.306's Avatar
    Join Date
    May 2009
    Location
    Saskatoon Sask.
    Posts
    994
    I will sign on for one 4 cavity 38 cal hollow base mould .
    barclaypainter( at ) shaw ( dot ) ca

  10. #10
    Boolit Buddy
    Join Date
    Jun 2011
    Posts
    135
    I am in for 1 x 2C 411395 194gr HBWC with just the HB pin set.

    bclosius at myacc dot net

  11. #11
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099
    Quote Originally Posted by tygar View Post
    I could go for the 45. 2 cavity.
    Thanks
    Tom
    Please read post 1 and list the other things.

  12. #12
    Boolit Master
    Join Date
    Nov 2007
    Location
    Rochester, NH
    Posts
    1,218
    RJM52

    vitalsupplynh at gmail dot com

    Would like a 4 cavity 411395 with both sets of pins

    Thanks...Bob

  13. #13
    Boolit Master dkf's Avatar
    Join Date
    Mar 2013
    Location
    Pa
    Posts
    1,555
    dkf
    krflff2 at dejazzd dot com
    One 432395 2 cavity with HBWC and Solid blank pins.
    Last edited by dkf; 01-29-2014 at 05:51 PM.

  14. #14
    Boolit Master

    Join Date
    Mar 2011
    Location
    oklahoma
    Posts
    2,491
    BK7saum

    Put me down for the following:

    358395. 4 cavity with HB and flat pins

    411395. 2 cavity with HB and flat pins

    433395. 2 cavity with HB and flat pins

    453395. 2 cavity with HB and flat pins

    Bradleyk4860 AT gmail DOT com.

    Will these all be cut at the same time or do you think it may be split up as numbers are sufficient to be produced.

  15. #15
    Banned
    Join Date
    Jul 2013
    Location
    Virginia
    Posts
    1,243
    Quote Originally Posted by 45 2.1 View Post
    Please read post 1 and list the other things.
    Didn't know this was a go. thought this was still in the discussion stage.

    453395 2 cav HB & solid pins. tbrolliniATgciDOTnet
    Last edited by tygar; 01-29-2014 at 03:49 PM.

  16. #16
    Boolit Bub
    Join Date
    Nov 2012
    Posts
    67
    I would like one each 2 cavity molds, all pins, 358, 432 and 453
    Jmwbruce at aol dot com

  17. #17
    Boolit Man
    Join Date
    Dec 2011
    Location
    NoVA
    Posts
    87
    I would like one of each of these:
    358395. 2 cavity with HB and flat pins
    432395. 2 cavity with HB and flat pins

    iijsep at gmail dot com

    Thanks

  18. #18
    Boolit Bub
    Join Date
    Aug 2011
    Location
    Beavercreek Ohio
    Posts
    73
    I would like one 358395 4 cavity with HB and flat pins.

    erballmann AT sbc global DOT net

    Thanks

  19. #19
    Boolit Buddy

    Join Date
    Jun 2013
    Posts
    363
    One 4 cavity 358395 HBWC 148gr mold with HB and flat pins
    jason at@ kates DOT DOT org

    Thanks

  20. #20
    Boolit Mold
    Join Date
    Sep 2012
    Posts
    28
    CML chronic subsonic at g mail .com

    1x 358 2 cav with all pins
    1x 432 2 cav with all pins

Page 1 of 7 1234567 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check