Interested in 4 cavity. Would also be interested in some flat base non checked cavitys.
Interested in 4 cavity. Would also be interested in some flat base non checked cavitys.
Interested in 4 cavity GC
updated, I am headed to the shop tomorrow, by tomorrow nite I will have prices and block sizes finalized.
Kindly PM me your mailing address so funds may be sent.
For some reason, Islamists are the only racist, sexist, homophobic theocrats the media can't summon outrage against.
I'm interested in a ten cavity.
I'm interested as well. So what kind of accuracy are we talking here, what twist is useable for this projectile (1X7 and 1X8 is preferred right)? Sorry for asking so many questions...
Interested in a 6-8 cab depending on block size.
http://castboolits.gunloads.com/show...431-Noe-225-70
Both SJ & I were using 1-9 barrels. I traded for the bullets I shot, from my rifle, shooting my bullets I'll expect 10 shot groups of 1.5" or less.
IHMSA # 566 "time sure flies when you're having FUN"
Probably in the 13.5 - 14 BHN range . The alloy I mixed a while back analyzed at 2.6 Sn / 7.0 Sb. 14 is the BHN the mixing program gives when I put the above # into it, but might be a bit higher as I water drop my bullets, more for a place to put them ,than for any hardening effects.
Last edited by Wayne S; 01-26-2014 at 04:55 PM.
IHMSA # 566 "time sure flies when you're having FUN"
Will this "fit" a 223 chamber (not 556) if sized to 225 or 226?
Is the estimated weight of 75 gr just the boolit or does that weight include the gas check and the lube?
What is the typical wait for the cherry once ordered?
Any chance of more the 8 cavities in one block and will all the cavities be on one side?
Last edited by CATTLEMAN; 01-28-2014 at 05:05 AM. Reason: another question came to mind
I updated prices, the weight listed will be checked and lubed.
I do not see any issues with this fitting a 223 chamber if it is sized correctly.
if there is a high demand I may be able to double side the 8 cav to make it 16.
What would the price be for a 16 cavity?
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |