Somewhere I saw plastic tips for boolits for sale. I'm thinking it was somewhere on this wonderful board. Searched and can't find them here anywhere. Anybody have a link or info on where to find plastic boolit tips. I'm trying to shoot something other than FN or soupcans for some long range hunting and looking for anything to help boost the BC. Thanks. 10 ga
10 gauge: as per Robert Ruark, "use enough gun"
MOLON LABE
"I have a list, and am prepared for widespread civil disorder!" 10 ga
Can't help you with plastic tips, sorry.
However over in group buys . If you are looking for a 30 caliber. They are running a 218 or so grain 30 caliber hollow point mold.
Last summer I got in on the MP 30-180-HP. Crammer three cavity. Bullets drop right off the thin HP pins.
It's nice. Very nice. Feeds up through my M70 in 30-06 so slick I wonder if it chambered a round. See link below.
http://castboolits.gunloads.com/show...Sil-brass-mold
There are solid copper bullets called Raptors that have optional plastic tips, but I've never seen such a thing offered for cast bullets. The tips would have to match a bullet profile, and a hollowpoint exactly. They would also lengthen such a bullet.
http://www.midwayusa.com/find?sortby...ensionid=20614
What about using hot glue in the HP type bullit? I was think that would increase expansion if you would leave a small void in the bottom of HP. I was thinking about it but I in the middle of a 22 cal project.
“A liberal’s paradise would be a place where everybody has guaranteed employment, free comprehensive healthcare, free education, free food, free housing, free clothing, free utilities, and only law enforcement has guns. And believe it or not, such a place does indeed already exist: It's called Prison."
--- Sheriff Joe Arpaio, Maricopa County, Arizona
That would be an answer to a problem that does not exist.Originally Posted by wistlepig1
Precisely.
I'm not very into the "cool" factor with my bullets. They still seem to work.
Ive seen ski plugs mentioned. You can look into that, but you may aswell buy j-buls by the time you pay for those "tips". Seems like getting a mold with the profile you want or buying bullets is your best option.
Billy Dixon didn't need plastic tips.
I have danced with the Devil. She had excellent attorneys.
Remember, the OP wants to increase his BC. At least that's my take on it.
Long nose and lots of lead is one way. http://www.buffaloarms.com/.42-.45_c...s_pr-4157.aspx Scroll down and look at the .446" 550 grain "Roos" as example.
The OP was short on specifics...there's a lot of ways to skin a cat...
I have danced with the Devil. She had excellent attorneys.
I have swaged an airsoft bb in the tip of a bullet
Come and take them, Boolits first.
Zombie hunter, Lic# 3006
Billy Dixon didn't use a computer either, and yet here we are using one.
With a cast boolit. You can have a lube size nose punch shaped to point a bullet. Collapsing the HP cavity into a point.
However in the real world things aren't that simple. However to try to live in a complicated world is the fools Foley. If any of you have the world figured out. I'd like to hear your explanation of space time. Not the three liner at top of a wiki page.
I'm not. I don't own a computer.Billy Dixon didn't use a computer either, and yet here we are using one.
a ski plug works. whoever mentioned they're expensive is buying gold plated. $3 per 1oo isnt bad.
Last edited by Rangefinder; 01-03-2014 at 11:20 AM.
Guns have only two real enemies; Rust and Politicians...
"Praying might get you to heaven, but trespassing will expedite the journey..."
Where might I be found when I'm not here? Try looking here:http://www.facebook.com/NSWE.Pagosa and here: www.rescueropes.org
I assume you're using your mom's computer in her basement?I'm not. I don't own a computer.
A plastic plug machined to mach the mold profile with a small stem placed in the mold and cast to may bond better than the J words with plastic tips do. Lead will melt into it forming a solid bond. A screw machine could be set up to run them very quickly ( probably 10,000 or so a day). A custom mold with a small metplat and tapered nose could cast the same thing in all lead. Overall length would have to be help for the twist rate being used though.
How about this:
http://www.midwayusa.com/brand/cutting-edge-bullets
Used to be able to get the tips alone from:
http://cuttingedgebullets.com/
You may have to work the hollow point a bit (might be easier to drill them out), then do some thing to try and match the profiles. Never tried it; but there at some "tips".
Last edited by dudel; 01-03-2014 at 02:37 PM.
Yeah, he did. It was located between his ears. Most of us are equipped likewise and with one a great deal more powerful than what you can buy at Wally World.Billy Dixon didn't use a computer either, and yet here we are using one.
I have danced with the Devil. She had excellent attorneys.
Most folks don't spend the time 'programming' that grey matter computer well enough
to do the long range work. Shooting bison all day for a living will put a whole lot of
raw data into that system and help develop some pretty sophisticated 'algorithms'
to calculate what to hold.
Bill
If it was easy, anybody could do it.
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote