RepackboxRotoMetals2MidSouth Shooters SupplyTitan Reloading
WidenersLee PrecisionLoad DataReloading Everything
Snyders Jerky Inline Fabrication
Page 1 of 5 12345 LastLast
Results 1 to 20 of 86

Thread: Made more Ben's Red today.

  1. #1
    Boolit Grand Master
    Ben's Avatar
    Join Date
    Apr 2005
    Location
    Cleveland, AL
    Posts
    9,258

    Made more Ben's Red today.

    If you have not taken the time to try Ben's Red, you're missing out on a great cast bullet lube.

    50% beeswax ( Some choose to use 55% with good results )
    30% Red & Tacky Lucas High Temp Grease
    10% Johnson's Paste Wax
    5% Dexron II or Dexron III Trans. Fluid
    5% STP Oil Treatment

    Today, my supplies of Ben's Red were running a bit low, So..., after about 30 - 40 minutes of time invested in making Ben's Red, I'm back in business with my favorite lube now.

    I'll let this fully cool, cut it into 1" wide strips ( the depth of the lube in the pan is about 2" ) and put the lube into gallon sized freezer bags for storage.

    Last edited by Ben; 12-18-2013 at 06:56 PM.

  2. #2
    Boolit Master



    w5pv's Avatar
    Join Date
    Jun 2011
    Location
    Orange,TX
    Posts
    2,672
    I pour mine into a couple of plastic ice cube trays works for me and then store them in a sip lock bag.It is the best lube I have used to date.
    Are my kids/grandkids more important than "o"'s kids, to me they are,darn tooting they are!!! They deserve the same armed protection afforded "o"'s kids.
    I have been hoodwinked but not by"o"
    In God we trust,in "o" never trust
    Support those that support the Constitution and the 2nd Amendant

  3. #3
    Boolit Master

    fivegunner's Avatar
    Join Date
    Aug 2005
    Location
    LOWELL Michigan
    Posts
    713

    Ben`s red

    Nice picture ! I am going to try some , got all the stuff , read all the post, all I need is to get it done Thanks for sharing.

  4. #4
    Boolit Grand Master
    Ben's Avatar
    Join Date
    Apr 2005
    Location
    Cleveland, AL
    Posts
    9,258
    By the way, mine was made outside on an elect. hot plate.

    I do this to prevent mass bedlam if I had been fool enough to try making the lube inside the kitchen.

    My wife would go completely " Kazoo ! ! "

    We've been married since 1970, I'd like to keep it that way...........

  5. #5
    Boolit Master


    doctorggg's Avatar
    Join Date
    Mar 2012
    Location
    Central, VA
    Posts
    569
    Time for me to make another batch. I also do it outside on a hotplate to keep the wifey happy. Good stuff. I add a little extra beeswax for my needs. Works great.
    Courage is being scared to death-but saddling up anyway. John Wayne

    A man has to do what a man has to do. John Wayne

  6. #6
    Boolit Grand Master
    Ben's Avatar
    Join Date
    Apr 2005
    Location
    Cleveland, AL
    Posts
    9,258
    Quote Originally Posted by w5pv View Post
    I pour mine into a couple of plastic ice cube trays works for me and then store them in a sip lock bag.It is the best lube I have used to date.
    A couple of yrs ago , I poured some hot Ben's Red lube into cheap plastic containers, it melted the plastic and liquid lube went everywhere .

    I usually pour mine into a metal pan after that bad experience. I realize that some plastic will tolerate more heat than other kinds. I guess I picked the wrong kind of plastic container that day. It was a BAD experience.
    Last edited by Ben; 12-18-2013 at 06:58 PM.

  7. #7
    Boolit Master
    Join Date
    Jan 2009
    Location
    Winchester, TN.
    Posts
    877
    Quote Originally Posted by ben View Post
    by the way, mine was made outside on an elect. Hot plate.

    I do this to prevent mass bedlam if i had been fool enough to try making the lube inside the kitchen.

    My wife would go completely " kazoo ! ! "

    we've been married since 1970, i'd like to keep it that way...........
    very smart man !!!

  8. #8
    Boolit Master


    kungfustyle's Avatar
    Join Date
    Feb 2013
    Location
    Knoxville, TN
    Posts
    1,236
    nice sight on the Mauser. How do you like it? Thanks for the lube recipe.

  9. #9
    Boolit Master
    Join Date
    Feb 2013
    Location
    Missouri
    Posts
    1,084
    I've had some unpleasant encounters after making bullet lube indoors myself.

  10. #10
    Boolit Master
    Join Date
    Nov 2009
    Location
    Chesterfield Mo.
    Posts
    827
    Since I am not afraid of my wife I do it in the kitchen. Watch so you don't get the lube too hot so it won't smoke so much. Take your time and have everything set up before you start. If you don't have a stove fan vent, do it with the windows open. I use 1 inch white plastic plumbing pipe cut to the proper length and with ends made from plastic cut with a hole saw and taped on so it can be removed to push the lube out. You can buy enough end plugs and do the same. It will stick so they need to be frozen and then pushed out. I use masking tape to hold the bottom on and they can be used numerous times.

  11. #11
    Boolit Master
    Join Date
    Jan 2009
    Location
    Winchester, TN.
    Posts
    877
    Quote Originally Posted by Old Caster View Post
    Since I am not afraid of my wife I do it in the kitchen. Watch so you don't get the lube too hot so it won't smoke so much. Take your time and have everything set up before you start. If you don't have a stove fan vent, do it with the windows open. I use 1 inch white plastic plumbing pipe cut to the proper length and with ends made from plastic cut with a hole saw and taped on so it can be removed to push the lube out. You can buy enough end plugs and do the same. It will stick so they need to be frozen and then pushed out. I use masking tape to hold the bottom on and they can be used numerous times.
    And when she gets home the mess is cleaned up, the smoke is gone, the laundry is done and her dinner is on the table.

    Sorry, I just had to. Mine has her own gun, yes im afraid. She's a good shot too !

    Mike

  12. #12
    Boolit Master chsparkman's Avatar
    Join Date
    Dec 2012
    Location
    Woodbridge, VA
    Posts
    625
    I doubt anyone's afraid of their wife. It's a matter of love and respect for her domain. I make Ben's Red outside for that reason.

  13. #13
    Boolit Grand Master
    btroj's Avatar
    Join Date
    May 2006
    Location
    Nebraska's oldest city
    Posts
    12,418
    Respect is a key thing in a relationship. My wife wouldn't injure me but the marital harmony level would certainly drop.

    Is it that hard to do outdoor stuff outdoors?

  14. #14
    Boolit Master
    Join Date
    Mar 2012
    Location
    ALASKA
    Posts
    876
    Heck, I make a big enough mess in the kitchen just cooking food. I'd never ever try to cook lube in the house.

  15. #15
    Boolit Grand Master
    Ben's Avatar
    Join Date
    Apr 2005
    Location
    Cleveland, AL
    Posts
    9,258
    Quote Originally Posted by wlc View Post
    Heck, I make a big enough mess in the kitchen just cooking food. I'd never ever try to cook lube in the house.
    I think that it was Clint Eastwood that said..... " A man has go to know his limitations."

  16. #16
    Boolit Grand Master
    Ben's Avatar
    Join Date
    Apr 2005
    Location
    Cleveland, AL
    Posts
    9,258
    Quote Originally Posted by kungfustyle View Post
    nice sight on the Mauser. How do you like it? Thanks for the lube recipe.
    That's a Lyman 48 and yes it is NICE ! !

    Thanks,
    Ben

  17. #17
    Boolit Buddy
    Join Date
    Sep 2011
    Posts
    187
    So is it the beeswax color that makes mine come out more of a brown than red?

  18. #18
    Boolit Grand Master
    Ben's Avatar
    Join Date
    Apr 2005
    Location
    Cleveland, AL
    Posts
    9,258
    Yes, the beeswax that is a soft yellow and the B/wax that is very dark brown will definitely have a great influence on the final product's color.

    Ben

  19. #19
    Boolit Grand Master

    MtGun44's Avatar
    Join Date
    Nov 2006
    Location
    eastern Kansas- suburb of KC
    Posts
    15,023
    Ben - The way I introduce that quotation is to say "As that great American philosopher, Harry Calihan, said, "A man has got to know his
    limitations."

    Great minds run in the same gutters, it would seem.

    Bill
    If it was easy, anybody could do it.

  20. #20
    Boolit Buddy
    Join Date
    Dec 2013
    Location
    Central OH
    Posts
    495
    Ben,
    Is this an all purpose lube or one designed for higher velocities and pressures? I don't shoot over 1100 fps and most times slower than that in my pistols. Is this suitable for pan or tumble lube applications or only used in a press?

Page 1 of 5 12345 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check