Ordered some 1/8" Duro-Felt to make my own Wads.
Wonder wads are just to pricey.
What do you guys use for lube ?
Ordered some 1/8" Duro-Felt to make my own Wads.
Wonder wads are just to pricey.
What do you guys use for lube ?
Failure is not an Option
Olive oil works for me.I also use mink oil.
Fly
I like Gatofeo #1. Gulf wax, bees wax, and sheep tallow. I had problems with oils and soft lubes migrating into the powder and weakening the charge in revolvers. This stuff is hard and doesn't migrate.
-Nobade
I have used canola oil and bees wax heated to liquid to soak into the felt before cutting the wads. Works pretty good.
Pete
I make/use 2 parts bees wax, 1 part lard, 1 part olive oil. In colder months decrease bees wax a bit. Heat up a bit in bottom of pie tin and soak wads.
Cut the wads out first then lube them. I've used 50/50 beeswax mixed with either lard, deer tallow, or olive oil as the other half. A 7/16 hole punch chucked into the drill press works great over a hardwood block to cut the wads. Hogging out the channel in the punch to smooth it helps the wads to pass through easier.
Hellgate in Orygun
With 16+revolvers, I've been called the Imelda Marcos of cap&ball.
If you do not subscribe to a newspaper you are uninformed. If you do subscribe to a newspaper you are misinformed. Mark Twain
”We know they are lying, they know they are lying, they know we know they are lying, we know they know we know they are lying, yet they are still lying.” –Aleksandr Isayevich Solzhenitsyn
+1 to Gatofeo's lube. But it's all I've tried on wads. I've been using grape seed oil for patches, which seems to work OK.
I use hellgates formulas and now also lube after I punch them out.
Your mother was a hamster, and your father smelt of elderberries
https://www.youtube.com/watch?v=YgNVPC2wmWI I use this as the film shows .
T/C wonder lube or bore butter. Put in plastic bag and throw in the microwave. the wads will soak it up. if not enough, add a little more and do it again.
Johnson Paste Wax or Kiwi neutral shoe polish, wipe thin film with fingers, then bake at 250 degrees in oven until distributed / absorbed.
What about Dry Lube ?
Like the spray on stuff in a can ?
Failure is not an Option
Moly dry spray lube does work.
Fly
How about Liquid Wrench dry lube, Not the graphite stuff
Last edited by hylander; 11-19-2013 at 10:55 PM.
Failure is not an Option
Gatofeo #1 I just made some up. the Mutton is available from dixie gun works, our Own randy rat has the beeswax and parrafin is available at most stores.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |