Another possible source

[Wolfsbane]

I came across this company from the Summit Racing catalog.

It's a coating supplier. Unlike VHT or Klass Kote, it sells products in half pint, pint, quart and gallon cans rather than rattle cans. That usually means it's a supplier for industrial and professional applications rather than consumers. Probably better for our applications with less waste than an aerosol.

They have one part, two part top coats, engine paints and high heat paints

Take a look. I have no association or financial interest in the business. I haven't tried them myself.

Por-15

http://www.por15.com/

[bangerjim]

I see uses for this stuff for me.............but NOT on boolits. Thanks for posting it! I have a distributor locally.

Anything in a spray can is EXTREMELY diluted with solvents. Best way to test for a GOOD spray coating with a heavy solids content is to shake a can that has been setting for several weeks. If the marbles rattle instantly, there are very solids in there and it is a cheeeeep product that will not coat and will drip and run badly! It should take at least 5-7 seconds to even START to hear the rattle on good quality paints.

bangerjim