MiHec 41cal, 265gr Trueshot Clone brass two or four cavity HP or Solid, PB or GC

[ohnomrbillk]

MiHec 41cal, 265gr Trueshot Clone brass two or four cavity HP or Solid, PB or GC





Here is the link to the original discussion thread: http://castboolits.gunloads.com/show...5g-WNFP-GC-411

For the two cavity solid, the price is $75 with plus $15 shipping.

For the two cavity cramer HP, the price is $90 with one set of pins included plus $8 per extra pin set if wanted plus $15 shipping.

For the four cavity solid, the price is $90 with plus $15 shipping.

For the four cavity cramer HP, the price is $120 with one set of pins included plus $16 per extra pin set if wanted plus $20 shipping.

Note: Due to our present exchange rate, the price of the mold may not be fixed. It takes time to do these and the world economy changes during that time.

Pin options: 1) Large HP, 2) Penta HP, 3) Small HP, 4) Cup HP, 5) blank pins for solid.

Weights ready to load are: PB & GC solids 265 gr., Large/Penta HP 249 gr., Small HP 259 gr., Cup HP 259 gr., Meplat to crimp groove 0.430". Meplat = 0.320" .

Sequence of events: Participants order molds and are placed on the list, the Group Buy will close (which will be posted on the thread) at sometime determined by MiHec, the molds are made from the orders on the list at the time it is closed or by altering what you want via PM to MiHec after it's closed. Extra molds should be available... order them by PM to MiHec. Invoices will be sent out via e-mail from the listed addresses and you pay by using Paypal...... It is my understanding the invoice will be in Euros which Paypal converts from Euros to dollars. After you pay, the mold gets shipped.



Please give your disguised e-mail address and the number of molds and type you want.

Sign up list for the 41 265 True Shot Clone by Mihec in Brass

2 cavity Solid
1. jroc...jroc324 AT gmail DOT com...2 cavity solid PB
2. Joeb4065… Jburson101 at yahoo dot com…2 cavity solid, plain base
3. Hog50… cdotrobinson seven at cox dot net…2 cavity solid gas check
4. RICHP… richlp1 at Verizon dot net…dual cavity, solid with check
5. ermont...ermont at sandia dot gov...2 cavity plain base solid
6. jroc...jroc324 AT gmail DOT com...2 cavity solid GC


2 cavity Cramer
1. photomicftn…bclosius at myacc dot net…2 cavity Cramer with all pins, PB
2. TUG...ronnieg nine seven 8 six six at yahoo dot com...2 cavity, Cramer, PB with all the pins.
3. Lefty SRH…schockley at icloud dot com…2 cavity Cramer with cup point pin, PB
4. osteodoc…tom garcia 15 at yahoo dot com…..2 cavity gas check with small HP and blank pins
5. skeet028… gunner at TCTwest dot net… 2 cavity Cramer with Penta pins and blank pins, GC
6. taugust… g99jeb (at) aol (dot) com… 2 cavity Cramer with all pins and GC
7. chuckbuster… chuckbuster at hotmail dot com…2 Cavity, Gas Check, All Pins
8. scb… toolmaker at twcny dot rr dot com…2 cavity, PB, penta pin hp
9. wickerbill... billweaver2 at juno dot com....two cavity cramer PB with all pins
10. pack3480...dcasad(at)hotmail(dot)com...2 cavity Gas Check Cramer with all pins
11. MostlyOnThePaper…kc5vtk at comcast dot net…2 cavity Cramer all pins gc
12. bdicki...bdickinson67098 at roadrunnerdotcom....2 cavity plain base Cramer all pins.
13. superdan...mausernuts at yahoo dot com...2 cavity GC Hollow Point with small, large and solid pins
14. NYBushBro...mopedmedic AT hotmail DOT com...2-cavity GC Cramer with all pins.
15. TheCelt...rmaccrone AT mchsi DOT com...2 cavity Cramer GC with all pins.
16. PB64...pw1340 at yahoo dot com...2 cavity Cramer gas check with all pins.


4 cavity Solid
1. MostlyOnThePaper…kc5vtk at comcast dot net… 4 cavity solid pb
2. taugust… g99jeb (at) aol (dot) com… 4 cavity solid PB
3. chsparkman...mrsparkman at mrsparkman dot com...4 cavity solid GC
4. cainttype...drctml(AT)yahoo(DOT)com...4 cavity solid PB
5. RJM52…vitalsupplynh at gmail dot com…4-Cavity Solid Plain Base
6. TUG...ronnieg97866 at yahoo dot com.....4 cavity,gas check, solid
7. 3584ELK...a_p_technician at yahoo dot ......4 cavity solid, PB
8. ohnomrbillk...william dot kinderknecht at gmail dot com...4 cavity solid, GC
9. alha...snowserver (at) hotmaildotcom...4 cavity Solid, GC
10. pack3480...dcasad(at)hotmail(dot)com...4 cavity Gas Check solid


4 cavity Cramer
1. Bushog… boo-haaa at hot mail dot com…(2 molds) 4 cavity Cramer with all pins, GC
2. Arokcrwlr… pendlek at cisco dot com…4 cavity Cramer w/all pin options, PB
3. colt saa… Colt_saa (at) RocketMail (dot) Com…4 cavity Cramer w/large pins, PB
4. CLAYPOOL...claypoolsemailadress…4 cavity Cramer, GC, with all pins
5. RJM52…vitalsupplynh at gmail dot com…4-cavity Cramer GAS CHECK with Deep HP and Blank pins
6. mold maker… alicejerry at charter dot net… 4 cav Cramer with all the pins, GC
7. TUG...ronnieg97866 at yahoo dot com.....4 cavity,gas check, HP with all the pins
8. gtgeorge...gspatton at gttransmissions dot com...4 cavity cramer in PB with all pins
9. ohnomrbillk...william dot kinderknecht at gmail dot com 4 cavity cramer GC all pins
10. CLAYPOOL...goodfarms1 (at) myfrontiermail (dot) com..4 cavity Cramer, GC, with all pins
11. alha...snowserver (at) hotmaildotcom...4 cavity Cramer, GC, with all pins
12. TMSCU...Tmoyer1952 at yahoo dot com...four cavity HP GC with all pins.
13. FLYCUTTER...r underscore KARK at ATT dot net...4 cavity crammer GC, large, small and pinta pins
14. Apportation ... casnyder at losch dot net ... 4 cavity cramer in PB with Large HP, Penta HP, Small HP, Cup HP & blank pins

[WallyM3]

Please sign me up for one 2 cav Cramer with penta pin set and blank pin set, PB.

wally (dot) murray3 (at) g mail (dot) com

[MostlyOnThePaper]

kc5vtk at comcast dot net

2 cavity solid gc and 4 cavity solid pb for me please!

[BK7saum]

Im in for a 2 cavity plain base with all pins.

Bradleyk4860 AT.gmail DOT com

[Lefty SRH]

2 cavity PB cup point pin please

Steve dot chockley at americanleakless dot com

[bushog]

I'll take two 4 cavity molds with all pin options.

boo-haaa at hot mail dot com

Thanks,

Bushog

[mold maker]

Make mine a 2 cav GC with all the pins
alicejerry at charter dot net

[45 2.1]

Here ya go Bill:

[skeet028]

Tried to sign up here..but no go..Trying again

A 2 cavity GC With Penta pins

gunner at TCTwest dot net

Gonna be perfect for my B'ar gun when hunting elk. Can the penta pins be turned to make a solid.. Just wondering.

[ohnomrbillk]

I'll take two 4 cavity molds with all pin options.

boo-haaa at hot mail dot com

Thanks,

Bushog

2 molds, each 4 cavity Cramer Hollow point, all pin options for both.

The question below is bold and all caps to yell at myself to remind me to ask you. You are not being yelled at

GAS CHECK or PLAIN BASE?

[ohnomrbillk]

Here ya go Bill:

Looks Great

Thank you

[ohnomrbillk]

Looks like we are off to a good start

[osteodoc08]

Will this be using the 416 gas checks?

[45 2.1]

Will this be using the 416 gas checks?

The plan is Hornady 416 GC. I have some, but ALL OF THEM have been flared for a special RCBS mold. How about someone or more than one confirming what GC shank diameter you want on this.................

[osteodoc08]

If the plan is for using the Hornady 416 GC, then I know what I'll be ordering soon. Just need 100% confirmation.

[chsparkman]

I would like a 4-cavity solid GC.

mrsparkman at mrsparkman dot com

[ohnomrbillk]

The plan is Hornady 416 GC. I have some, but ALL OF THEM have been flared for a special RCBS mold. How about someone or more than one confirming what GC shank diameter you want on this.................

We decided in the discussion thread to use a 0.393" shank to utilize the Hornady gas check

[osteodoc08]

4C Cramer GC all pins

tom garcia 15 at yahoo dot com

[Arokcrwlr]

I'm in for a 4 cavity Cramer w/all pin options, PB

kraigpendlet at gmail dot com

[taugust]

Please put me down for two molds:

one 2 cavity Cramer with all pins and GC

one 4 cavity solid PB


g99jeb (at) aol (dot) com


Thanks!