What steps would you go through to make jackets for your .357/9mm
I would try to use 9mm brass as it's available.
I have a 6 ton press.
I tried using a lee sizer, with a turned down push rod to no avail.
How do you guys do it, how many steps?
What steps would you go through to make jackets for your .357/9mm
I would try to use 9mm brass as it's available.
I have a 6 ton press.
I tried using a lee sizer, with a turned down push rod to no avail.
How do you guys do it, how many steps?
Come and take them, Boolits first.
Zombie hunter, Lic# 3006
1 step from 9mm annealed to 0.355... do you have a lathe? i think some guys are using the Lee sizer dies but i am not sure... it is pretty straight forward to make draw dies with a bench top lathe
edit: brass must be annealed!
Last edited by Cane_man; 09-25-2013 at 05:26 PM.
You'll also find it easier to use .380 acp, or .32 acp brass for .35 caliber bullets.
Hope this helps.
Fred
After a shooting spree, they always want to take the guns away from the people who didn't do it. - William S. Burroughs.
http://castboolits.gunloads.com/show...ss!&highlight=
http://castboolits.gunloads.com/show...ass&highlight=
Here is a couple threads for you.
Anything is possible. A trimmed 9mm case sized down with a 92 grain 32 cal core makes a perfect 145 grain JHP .358 bullet!
BT
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |