38 special up for grabs

[pull the trigger]

I'm retired and new to reloading and could use some 38 brass and boolits for startup.
I have friends collecting lead and cases from ranges.
I don't own a press yet but thinking of getting one of those $30 lee loaders to start.
I have a Ruger "old style" SA convertible revolver.
Looking for some advice and help. Thanks, Tom

I will send some to ya. It will take me a few days to get more boolits sized and lubed but pm me yur address and I will send them out as soon as I can get them ready.

[beezapilot]

Trys357- what a coincidence!!!!!!!!!! PullTheTrigger gave me a heads up that you can use a press and I just happen to have a press you can use- it is an older, repainted RCBS press that I used for years and years. Just like me- old & ugly, but still works just fine. PM sent.

[Brett]

Does any one happen to have a heater for a lyman 450. I used a heat gun today and it worked but I don't have enough hands to work that way. By the way I found the o- ring at a small local hardware store.


I bought the 1 inch and the 1 and 1/16 inch. I am using the 1 but I think either would work.

[Baryngyl]

Almost 2 times the price for the smaller O-ring, was it gold plated?


Michael Grace

[Brett]

I guess they are more popular. Compared to the $5 Autozone wanted I didn't complain.

[pull the trigger]

Trys357 got brass boolits and a some alox out to ya. Enjoy!

[trys357]

I just received cast boolits, brass and alox a short time ago.
Been gathering some lead from my local indoor range.
Can anyone suggest a good online source for a 38/357 mold.
Sincerely thankful for your gratitude.

[pull the trigger]

glad to help
mods please lock thread