Hodgdon #24 manual data request

[subsonic]

In the Hodgdon #24 load data manual, there is supposed to be load data show for the 9mm with 158gr bullets. Can anybody share the data? Either type it out or post a pic of that page? OAL, bullet, powder, charge, primer & case please if you type it out.

[subsonic]

Bump?

I know somebody on here has this old manual laying around.

[bobthenailer]

I checked my #25 manual ! no data for the 158 gr bullet

[subsonic]

Supposedly it's only in the #24 and maybe older manuals.

I have #26, no dice.

[swheeler]

#22 shows160 gr lead in 9mm luger

[subsonic]

#22 shows160 gr lead in 9mm luger

What is the data?

[bobthenailer]

There was a article in some years past in Handloader #173 page 25 about heavy bullets in the 9mm luger.
Heres a few loads from another issue, #255 pg 78 160 gr lyman #358311 , COL 1.105
BE 2.8 gr @ 853 fps
TG 2.5 gr @835 fps
UQ 3.5 gr @894 fps
NOTES this bullet did not stablize in the test gun ! a SIG P226

[swheeler]

page 135
9mm luger
S&W mod 39-4"
COAL not listed
only max loads listed
160 gr lead
hs6-4.8-975
hs5-4.0-945
trap 100-3.3-804
hp38-3.1-784

[subsonic]

Thanks guys!

[subsonic]

There was a article in some years past in Handloader #173 page 25 about heavy bullets in the 9mm luger.
Heres a few loads from another issue, #255 pg 78 160 gr lyman #358311 , COL 1.105
BE 2.8 gr @ 853 fps
TG 2.5 gr @835 fps
UQ 3.5 gr @894 fps
NOTES this bullet did not stablize in the test gun ! a SIG P226

I will have to dig through my old issues. Don't know if they go back that far.

Thanks!

Bet it was stripping....

[subsonic]

page 135
9mm luger
S&W mod 39-4"
COAL not listed
only max loads listed
160 gr lead
hs6-4.8-975
hs5-4.0-945
trap 100-3.3-804
hp38-3.1-784

That HS6 load looks like what I'm after!

[swheeler]

remember HS6 Win 540 samo-samo