I'm torn between two 38 Wadcutter mold designs.
The first is the RCBS 38-148WC
The second is the Saeco 3 Cavity #053
The pros for the RCBS are: currently available, cheaper, I have RCBS handles. The cons are: 2 cavity, Not exactly the design I'm seeking
The pros for the Saeco #053 are: Single grease groove, larger bearing surface, 3 cavity. The cons are: must be special ordered, I would likely need Saeco handles, higher cost.
I'm intrigued by the Saeco design with its button nose, crimping grove, lots of bearing surface and single grease groove. It may not work at all but I really want to give it a try.
The RCBS is a known item, and cheaper.
Any thoughts? Experience, free wisdom, Just plain ol' Opinions ?