Just wanted to give you all a heads up about this. Im running this group buy for another group thats closed and waiting but i know we have a large fallowing of buyers that seam to track our molds so i thought i woudl post this here so if there where any one else that wanted in on this design its going to be made next week. Its a 4 cav mold in out 3" long blocks
This is an aluminum 7075-T6 mold with a .1875 thick sprue plate and the block is 1.375 x 1.375 x 3.00.
The sprue plate is Hot blued and the locating pins and bushing are hardened and precision ground. Pins are selected after bushing are pressed into the blocks to insure perfect fit. The stop pin is the same screw/sleeve that the pivot uses. This allows the sprue plate to be flipped around if needed. The stop screw can be adjusted down to where it holds the sprue plate from lifting up.
"I will take one"
All standard buying applies, if you want it then say "I will take one" HERE on the forum, you will then be added to the list. The molds are first come first served, your position on the list is not locked in till we receive payment.
PLEASE don't pay unless you have spoke up here first or let us know over phone or email/PM.
Delevery date:
We are going to be cutting the cavs on this run next week, the blocks are cut all ready.
Payment:
Preferred payment is ether over the phone or by PayPal(+3%), but you can pay by money order if needed but shipping date will not be held till it arrives.
PLEASE!!! include your address, forum name and what mold your buying, put it in the notes section on paypal or on a paper with your money order.
Thank you - JT
The price for this run will be $115.00 + $5.80 shipping (flat rate box usps),
$19.95 to Canada and $23.95 to all other countries
first come first serve
|
   
   
|
|
Originally Posted by 35Whelen
).
