We have gotten tons of requests to do this boolit (C312-155-2R lee). This mold will be a 6 cav mold in our 3" long blocks. 6 cavs fit nicely in the 3" block with over .100 between each cav. This boolit is as close to the C312-155-2R lee as I could get it, another member sent me some to measure. There are some other boolits out there that are similar but have a much larger flat meplat then people want. this design has a round nose that's only .035 long. I have looked at the lees boolit and thy don't all seam to be the same. The boolits I got seams to have the nose finished with what looks like a drill tip. We wanted smooth transition to insure proper feeding. Price would be $125 per 6 cav mold.
This is an aluminum 7075-T6 mold with a .1875 thick sprue plate and the block is 1.375 x 1.375 x 3.00.
The sprue plate is Hot blued and the locating pins and bushing are hardened and precision ground. Pins are selected after bushing are pressed into the blocks to insure perfect fit. The stop pin is the same screw/sleeve that the pivot uses. This allows the sprue plate to be flipped around if needed. The stop screw can be adjusted down to where it holds the sprue plate from lifting up.
"I will take one"
All standard buying applies, if you want it then say "I will take one" HERE on the forum, you will then be added to the list. The molds are first come first served, your position on the list is not locked in till we receive payment.
PLEASE don't pay unless you have spoke up here first or let us know over phone or email/PM.
Delevery date:
We are going to be ordering the cutter next week, the blocks are cut all ready.
Payment: PLACE ALL ORDERS ON OUR NEW WEB SITE
www.HeavyMetalMolds.com
Preferred payment is ether over the phone or by PayPal(+3%), but you can pay by money order if needed but shipping date will not be held till it arrives.
PLEASE!!! include your address, forum name and what mold your buying, put it in the notes section on paypal or on a paper with your money order.
Thank you - JT
The price for this run will be $125.00 + $5.80 shipping (flat rate box usps),
$19.95 to Canada and $23.95 to all other countries
first come first serve
customer list
1: Tire, paid PO
2: counterfitter, paid PO
3: frankenfab, paid PP
4: Doc Highwall, paid PO
5: autodidact, paid PP
6: doctorggg, paid PP
7: Ford SD, paid PP
8: Paulinski, Paid PP
9: fastglock PB, paid PO
10: Danderdude, paid PP
11: A pause for the COZ, paid PO
12: Springfield FP
13: pascalp, Paid PP
14: NWFLYJ 1FP
15: treekiller, paid PO
16: Patrick L, Paid MO
17: missionary5155, paid PP
18: Curly James
19: Donor8x56r, Paid PP
20: Fishman FP
21: jethunter
22: IllinoisCoyoteHunter
23: cba257
|
   
   
|
|
What I am hoping is that you will make a few of this design in .316 and .325 like you did with the Ed Harris molds. Did I hear that you are considering a 316299 copy?
