After almost two years of deliberating, I guess I'm in....
One four (4) cavity plain-base with large HP and flat point pins......
jumpgate (at) telus (dot) net
After almost two years of deliberating, I guess I'm in....
One four (4) cavity plain-base with large HP and flat point pins......
jumpgate (at) telus (dot) net
Last edited by Gun-adian; 04-16-2016 at 04:43 PM.
There are precious few horror films that couldn't be cut well short by a single loaded 12 gauge and someone with the sense to use it. -- K.R. Murphy
Please add me to list. One four cavity GC mold with large hollow point and blank pins. E-mail jdoc2015 at yahoo dot com
bump on up
Hopefully this gets done before deer season this year?
My firearms project blog
Am I missing something? I know that there is no contract written or verbal that says what molds get done when but this one looks like they had mihec do it in under 2 months? http://castboolits.gunloads.com/show...-mold-for-9-mm
My firearms project blog
That appears to be a rerun on blocks that were already prepared, atleast for the brass ones. Also only 26 interested so far on this buy, there's other group buys with lots more interest that have been waiting even longer. Look at the 30 cal heavy sil buy, it's got a year on this one.
-Jesse
My firearms project blog
Ok glad you bumped this I just acquired a ruger 10" 357 maximum that is going to need to be fed . just curiosity what are the measurements for the two crimp to meplat and also the meplat percentage if these are known ? Thank you . I would like a 2 cav GC HP all pins and if possible could I get an extra set of blank pins for a total of 4 blank pins please thank you . thadd3220 at yahoo dot com . also if anyone knows of where I might find a couple hundred pieces of brass reasonably for maximum any info would be appreciated .
I had asked 45 2.1 this awhile ago concerned about OAL and he replied back .369" as the distance between crimp groove and meplat. My assumption is this is off of the top crimp groove. I'm planning on feeding these through my 77/357 bolt action, single fed no worries but if I wanted to have them fed from the magazine using .357 mag brass I can't have anything with a heavy meplat as per mag shape and seated over .380" iirc....so this one should work out just fine at least for me, ymmv.
My firearms project blog
Happy Birthday !
Jerry
S&W .38/44 Outdoorsman Accumulator
Phew..........there for a minute I thought this was another GB from LEE that got caught is some sort of time warp.
Happy "2nd BIRTHDAY" 361627 Group Buy!
Wow.............how time flies!
RRR
"I Make the part.............................that makes the parts"
Looking for Bullet Mould Handles, Heavy Duty Replacement Sprue Plates, Adjustable Paper Patch Bullet Moulds? Check here:http://www.kal.castpics.net/
My Feedback!
http://castboolits.gunloads.com/show...Red-River-Rick
My firearms project blog
Well I think I want to be removed from the list thadd 3220 at yahoo dot com . I really would prefer a round flat bullet like the RCBS 35-200 with a shorter nose . With about a 180 grain HP . Hope you guys get a mold cut soon good luck
The next time the list gets updated I would still like to add penta pins to my order please, Thanks!
My firearms project blog
I'll take one of the 4 cavity gas checked versions with a large HP pin set and a blank pin set. Thanks!
gswaggart (at) gmail (dot) com
is there a record for the longest wait???
My firearms project blog
Please remove me from the list.
I'm out, casting season for me is here and I saw NOE has these on sale currently so I just went with one of those. Please remove me from the list. Mihec's molds are great but I cast during the fall and winter and really want to be shooting this bullet next year. Good luck gents.
My firearms project blog
come on in.
One four cavity GC with all pins
pack3480 dcasad(at)Hotmail(dot)com
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |