WidenersLoad DataTitan ReloadingLee Precision
RotoMetals2RepackboxMidSouth Shooters SupplySnyders Jerky
Reloading Everything Inline Fabrication
Results 1 to 7 of 7

Thread: Lyman 410-32 210 SC HP GC REPAIR HELP ? Good advice?

  1. #1
    Boolit Buddy
    Cosmiceyes's Avatar
    Join Date
    Jun 2013
    Location
    Left Coast Suthern Kalifornia LA County
    Posts
    439

    Lyman 410-32 210 SC HP GC REPAIR HELP ? Good advice?

    I have a single mold block I need to repair. It is #410-32 210 grain SC HP Lyman. I sent it to Lyman who said they can't fix it. It is the only gas check 41 mold I have. It needs a new handle and the Hollow point pin piece. The screw piece is broken that keeps it in place during pour. Is there one among us that does,and can repair this nice older mold? What Lyman wants to do is have me trade it in for a new SC or DC mold with a cost plus the old mold for $59.81 tax included. They don't make a .41 anymore so I would have to find one elsewhere than Lyman. HELP PLEASE !!!!!
    Knowledge shall forever govern ignorance!

    I see what I am hunting just coming off the "GRILL"!

    It is not a measure of moral health to be well adjusted in a sick society!
    Jules

  2. #2
    Banned 45 2.1's Avatar
    Join Date
    Mar 2005
    Location
    Little Egypt, Part of the political fifedom of Chicago
    Posts
    7,099
    Quote Originally Posted by Cosmiceyes View Post
    It is #410-32 210 grain SC HP Lyman. It is the only gas check 41 mold I have.
    The first problem is that that mold number is a plain base mold. It was the first 41 mold I owned and it is quite accurate. Check the older Lyman manuals for confirmation on shape. Lyman made one gas check mold and it's designation is 410610. For the HP pin and knob.... our talented member "Buckshot" can supply that piece, but you will probably need to send him the mold. PM him for details.

  3. #3
    Boolit Buddy
    Cosmiceyes's Avatar
    Join Date
    Jun 2013
    Location
    Left Coast Suthern Kalifornia LA County
    Posts
    439
    Quote Originally Posted by 45 2.1 View Post
    The first problem is that that mold number is a plain base mold. It was the first 41 mold I owned and it is quite accurate. Check the older Lyman manuals for confirmation on shape. Lyman made one gas check mold and it's designation is 410610. For the HP pin and knob.... our talented member "Buckshot" can supply that piece, but you will probably need to send him the mold. PM him for details.
    Thanks I never got to cast with it,and it's been two months since I sent it to Lyman. So didn't know if I was about to lose a GC mold or not for real. I did want to get the information out as best I could. I will hunt up Buckshot ! 's
    Knowledge shall forever govern ignorance!

    I see what I am hunting just coming off the "GRILL"!

    It is not a measure of moral health to be well adjusted in a sick society!
    Jules

  4. #4
    Boolit Grand Master

    Wayne Smith's Avatar
    Join Date
    Mar 2005
    Location
    Hampton Roads, Virginia
    Posts
    13,655
    Yes, take a pic or two and PM Buckshot. He will need the mold but will fix you up right.
    Wayne the Shrink

    There is no 'right' that requires me to work for you or you to work for me!

  5. #5
    Boolit Master
    Join Date
    Sep 2005
    Location
    Dyer, Tn
    Posts
    1,224
    +1 on buckshot --does very good work

  6. #6
    Boolit Buddy
    Cosmiceyes's Avatar
    Join Date
    Jun 2013
    Location
    Left Coast Suthern Kalifornia LA County
    Posts
    439
    I have contacted Buckshot! As soon as I get a where to send it address I will ship it there. He can fix it! 's
    Knowledge shall forever govern ignorance!

    I see what I am hunting just coming off the "GRILL"!

    It is not a measure of moral health to be well adjusted in a sick society!
    Jules

  7. #7
    Boolit Buddy
    Cosmiceyes's Avatar
    Join Date
    Jun 2013
    Location
    Left Coast Suthern Kalifornia LA County
    Posts
    439
    Buckshot gave me a price,and Lyman is shipping it to him. He lives about a hour away! 's
    Knowledge shall forever govern ignorance!

    I see what I am hunting just coming off the "GRILL"!

    It is not a measure of moral health to be well adjusted in a sick society!
    Jules

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check