Flat nose top punch for .358

[glockky]

I am need a flat nose top punch for the lyman 4500 anyone know where I can pick on up at. I plan to use it with the lee .358 158gr flat nose bullet.

[Catshooter]

Either members Buckshot or The Perfessor can make you what you need. I can recommend both highly.

Welcome to the forum too.


Cat

[RobS]

I believe theperfessor is not doing work at the current time but will be back up in the coming months (October IIRC).

http://castboolits.gunloads.com/memb...3-theperfessor

Buckshot does excellent work, I had him make me a custom lube/size die once.

[Duckiller]

Get a nose punch with a BIG flat area. You can also use it for .40, .44, and .45.

[Mk42gunner]

I have sized thousands of flat nosed boolits using a piece of ¼" bolt about one inch long for a top punch. It works on multiple calibers too; I have used the same cut-off bolt for everything from a 257420 to a 452424.

If you want to get fancy, you can leave the head on, file it flat and turn it in a drill to closely fit the meplat of the boolit.

Robert

[wrench]

Accurate molds makes very nice flat top punches as well...
http://www.accuratemolds.com/order.php

[94Doug]

There are the ones by Lyman and RCBS for their WC's....like the 429348. You'll have to check CastPics for the number.

Doug

[DavZee]

Accurate molds makes very nice flat top punches as well...
http://www.accuratemolds.com/order.php

I just purchased the 3 flat punch set for $8 shipped! A most excellent deal!

[Wayne Smith]

Brass bolts are easy to size with a drill motor and rough stone. Grind the face flat and cut off to 1" and you have a top punch to fit that die. I have two sizes so far.

[John Guedry]

I use a 1/4 in. bolt with the head smoothed off.

[Kimber bob]

I agree, just recieved mine (top punches set of 3 from accurate molds) in the mail today. Very nice quality and at a very nice price. If you are using flat nose (semi or wad cutter) boolits then this is a great and cheap way to go

Nice Job guys!