Just recieved my mold 2 days ago from badgeredd that honchoed the 7mm Thor group from B-C company. It was obviously made by someone that isn`t comfortable with mold making. This is the first mold ,EVER, that I bought new that was rusted on the inside of the mold blocks. This is beside the fact that the mold was finally sent after many excuses about the delay of 10 months past delivery due date, or couldn`t seem to get it figured out about the different size molds ordered, had sprue plate problems and a lack of any preservative oils on the block and then these were shipped to Edd to distribute to we the buyers in the GB! I can probably use 0000 steel wool and light oil to clean the rusty surfaces on my mold. I won`t send this mold back to B-C for repair work as I can`t imagine the wait time for it considering the wait time just to get it. So, YES I won`t be considering ordering any further molds from B-C due to the manner this purchase went.Robert